SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Model Shipways Rattlesnake

5619 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2010
Model Shipways Rattlesnake
Posted by paulhelfrich on Monday, May 27, 2013 9:36 PM

This is the Model Shipways plank-on-bulkhead kit of the 1780 Massachusetts privateer "Rattlesnake."  I built this for a friend who already had the kit, but didn't want to build it himself.  And I can't say I blame him!  I don't recommend these plank-on-bulkhead kits to anyone except masochists.  Put another way, once you have the pre-cut bulkheads and frame together, the rest is largely an exercise in scratchbuilding.  The instructions are only moderately helpful; basically it's you against a big box of miniature wooden planks.    Nevertheless, I persevered, and here is the result. 

 

I greatly simplified the running rigging; I found the rigging diagrams largely impossible to decipher, so I based what I did on the main bits from the photo of a completed kit on the box.  After this experience, I'll be very glad to get started on a nice modern ship in good old styrene! 

 

All kidding aside, I have tremendous respect for anyone who can take a kit like this and build it into a real museum piece.  

 

  • Member since
    October 2003
  • From: Canada
Posted by sharkbait on Tuesday, May 28, 2013 2:23 AM

Yuh dun good - your friend must be thrilled.

You have never been lost until you've been lost at Mach 3!

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Tuesday, May 28, 2013 7:57 PM

Paul, I think you persevered very well in building this ship. You didn't say if this was your first plank on bulkhead kit or not. If it was, you did a good job. With a few more under your belt, they would look great. You've got the knack for building them and all you need is a little practice. Wooden ships just take a little while to learn the tricks to make them really shine. Steaming planks, fitting planks, and sanding and staining takes a bit of learning and practice, but, once learned, you get great results. Keep up the good work.

Jim Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    February 2010
Posted by paulhelfrich on Tuesday, May 28, 2013 9:53 PM

Thanks Jim!  Yes, this was my first plank on bulkhead wooden kit.  I built the old Scientific solid-hull Kearsarge about 20 years ago.  

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Tuesday, May 28, 2013 10:32 PM

Built a few of those solid-hull kits myself. They were fun to build.

Jim Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Wednesday, May 29, 2013 9:20 AM

The Model Shipways kits are among the best of the genre.  Some of the European kits are really junk.  A plank on bulkhead kit is not for the feint of heart!  Indeed they are closer to being a scrach build than a kit.

Don Stauffer in Minnesota

  • Member since
    June 2012
Posted by arnie60 on Wednesday, May 29, 2013 9:54 AM

Really nice work. I am wondering how long it took to complete this? I have been considering doing this kind of model since there seems to be a much, much greater selection of period sailing ship models to build than plastic has to offer. Again, impressive first effort for this medium.

  • Member since
    February 2010
Posted by paulhelfrich on Wednesday, May 29, 2013 10:31 AM

Thanks!   This took me about one year - while worked on several other projects simultaneously.  The hull planking takes the longest.  Once that's done, the rest goes together more or less like a styrene sailing ship kit.  

  • Member since
    May 2004
  • From: Mount Bretherton Model Aircraft Observatory
Posted by f8sader on Wednesday, May 29, 2013 1:31 PM

Paul, thanks for the post and your thoughts on building what appears to be a nice model!  Your comments go far for fledglings like myself who have big dreams, a kit stash, and not much experience with today's kits and building/painting supplies.

Lon-ski

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Wednesday, May 29, 2013 9:22 PM

The Scottish Maid, my avatar, took me two years to build. It's just OOB, not 100% scale. I added AM anchors and a few other items as the kit pieces were not really good. My wife was redecorating the den with a "beachy" theme. Lighthouses around the edge of the ceiling, fish nets with shells caught in them on the walls, and some pics of beach scenes on the walls. She looked through my catalogs, on the sly, and picked out the Scottish Maid and ordered it for a birthday gift. She said she wanted it on a shelf in the den. It took two years with her coming into the work area, looking over my shoulder, and telling me how nice it was coming along. When finished, I made the shelf and put it right where she wanted it. She had me put it right near the door where everyone would see it as they came into the room. I don't think that anyone who comes to our house gets past the door without hearing from her all about my building the ship. As a result, I've built a few for friends and a couple for some of our neighbors. Nice gig if you can get it as they pay for what they want plus everything I need to build it. So Paul, if you really like building them, get some practice and spread the word around. Wink

Jim Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.