SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Model Shipways Virginia Sloop

1054 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2012
Model Shipways Virginia Sloop
Posted by GMorrison on Tuesday, December 22, 2015 1:08 AM

I've never built a plank-on-bulkhead kit (POB). I just bought this from a private seller, and there's a couple of layers to the onion. I like to tell stories, so bear with me.

First, the kit.

I am planning for a basically modest retirement, in a house thats paid for and serviced by a little Toyota same ways.

In that house about 1200 sf which we own, there will be a big room where my half has a little table saw, a bench and a place to build wood ship models. I plan to give away the plasic models I own and the N Scale railroad stuff which I can sell.

Next layer, no HECEPOB for me and no further dreams of big ship models. If Hellers Victory is finished to the main tops, I will be happy with that phase of planning  big and being burdened.

Next layer, I have been a sailor since I was about 5. Sailboats. Sheet in one hand, tiller in the other, up and down chop. I plan to work from the base up. I want to rig a line only when I know why it is there.

So, I have a half finished racing schooner, a fishing schooner, a brigantine and a sloop.

Fair winds.

 

 

 Modeling is an excuse to buy books.

 

  • Member since
    May 2008
  • From: Wyoming Michigan
Posted by ejhammer on Tuesday, December 22, 2015 8:07 AM
Will be interesting to follow. I too have steered more and more away from plastics. I have been building wood small craft, boats and skiffs, and working coastal boats like the flattie and such. I have 4 larger wood kits in the stash but have so far avoided starting one for fear of screwing it up. They are assorted construction - POB, POF, Solid hull, Plank over solid hull. The small boats I've done are modified, kinda, POB/POF, some neither, just built over a form and holding it's own shape after removal from the form, like building a canoe. I do like following your work and comments on all things nautical. Thanks for posting. EJ

Completed - 1/525 Round Two Lindberg repop of T2A tanker done as USS MATTAPONI, USS ESSEX 1/700 Hasegawa Dec 1942, USS Yorktown 1/700 Trumpeter 1943. In The Yards - USS ESSEX 1/700 Hasegawa 1945, USS ESSEX 1/700 Dragon 1944, USS ESSEX 1/700 Trumpeter 1945, USS ESSEX 1/540 Revell (vintage) 1962, USS ESSEX 1/350 Trumpeter 1942, USS ESSEX LHD-2 as commissioned, converted from USS Wasp kit Gallery Models. Plus 35 other plastic and wood ship kits.

  • Member since
    August 2007
  • From: back country of SO-CAL, at the birth place of Naval Aviation
Posted by DUSTER on Tuesday, December 22, 2015 9:01 AM

Your plans sound very sencible, you should get a lot of satifaction out of doing it this way. 

Steve

Building the perfect model---just not quite yet  Confused

  • Member since
    July 2010
  • From: Tempe AZ
Posted by docidle on Tuesday, December 22, 2015 9:09 AM

This will be interesting to follow. I cannot remember if or when there was a wood ship model WIP. At least if there was, it was before my time on the forum.

i started sailing at the age of seven at NAS Alameda. I definitely miss sailing in the Bay.

Steve 

       

 

 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Tuesday, December 22, 2015 2:16 PM

Hello!

Good luck with your retirement plans! They sure sound good! With the economy in my part of the world, I would be glad to be able to go on retirement before I die!

So far I've built one wooden model ship. I'd like to show it here, because it is related to your boat - it's a Virginia pilot schooner. The kit was by Artist in the Latrine, but it is a ripoff of the Model Shipways Katy of Norfolk. I had to correct many things in it and do LOTS of research:

Now it seats in a custom built glass case in the house of my parents:

 

Good luck with your builds and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Tuesday, December 22, 2015 10:38 PM

That sounds like a nice, thoroughly reasonable plan, GM. Much like mine. (I'm semi-retired right now; as of May I'm done completely. My wife is also retired from teaching, so two Social Security checks and two pension checks await.)

I did a bit of sailing when I was a lot younger, but an increasing tendency to seasickness has discouraged me for the past twenty-five years or so. (I once managed to get seasick lying on a waterbed in a furniture store.)

I haven't seen the Model Shipways Virginia Sloop in the flesh, but I'm confident that it's a good, well-designed kit. The designer was Ben Lankford, who knows his stuff.

I wish you a happy, long, and healthy retirement.

Pawel, I really like your pilot schooner. Including the case. That triangular design is one I hadn't seen before.

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Wednesday, December 23, 2015 3:05 PM

Professor Tilley - thanks a lot. I designed the case myself and had it custom-built here in Poland. I'm proud about the Pilot, too - thanks a lot for your kind words. I wish you good luck on your retirement, too! Have a nice day - and Merry Christmas!

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.