SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Revell Viking Ship WIP- FINISHED!!

12605 views
103 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2012
Revell Viking Ship WIP- FINISHED!!
Posted by GMorrison on Saturday, January 2, 2016 11:32 PM

Just to relax, I pulled this one off the shelf.

 Modeling is an excuse to buy books.

 

  • Member since
    June 2004
  • From: East Stroudsburg, PA
Posted by TigerII on Sunday, January 3, 2016 12:52 AM

Nice, I like the way you relax. Wink

Have fun with that relaxation Viking ship.

Looking forward to more pics.

Achtung Panzer! Colonel General Heinz Guderian
  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Sunday, January 3, 2016 7:35 AM

I can't wait to see what you do with it!

Bill

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Sunday, January 3, 2016 8:11 AM

A Revell Viking ship?  I havent seen this one before.  Is this a new kit or could it be the old Aurora kit they might have picked up?  If so, it was a pretty good kit and I wouldn't mind getting one again.

  • Member since
    March 2012
  • From: Marysville, WA
Posted by David_K on Sunday, January 3, 2016 10:21 AM

A GMorrison sailing ship WIP?  Nice!

I've heard good things about the Revell Viking Ship, but I've never seen it up close...looking forward to following this thread...

Dave

        _~
     _~ )_)_~
     )_))_))_)
     _!__!__!_         
     (_D_P_K_)
   ~~~~~~~~~~~~~
    ~~~~~~~~~~~

Current Project:  Imai/ERTL Spanish Galleon #2

Recently Finished: Revell 1/96 Cutty Sark

Next Up:  ???

 

  • Member since
    September 2005
  • From: Illinois: Hive of Scum and Villany
Posted by Sprue-ce Goose on Sunday, January 3, 2016 10:22 AM

ikar01

A Revell Viking ship?  I havent seen this one before.  Is this a new kit or could it be the old Aurora kit they might have picked up?  ............

Definitely not your grand dad's AURORA kit ! Wink
 
Won't need the rigging spiders for that one. Big Smile
 
Hail Ragnar !
Hail Einar !
Whistling
  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Sunday, January 3, 2016 11:21 AM

Nice! I will be following this.

  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Sunday, January 3, 2016 11:40 AM

Funny about your choice... I'm waiting for some PE for the IP in the office of my Fw 190 F-8 and was thinking about doing another kit (a ship) in parallel. I put the box on my work "bench" (card tables) and will think about it. I'm not a multi-tasker however, so I'll probably just watch what you do with your kit and hope I can do half as well when I get around to mine.

Mike

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Sunday, January 3, 2016 3:17 PM

I'm a big fan of this kit. In the unlikely event that anybody's interested, here's a link to a thread about mine, from about two and a half years ago: http://cs.finescale.com/fsm/modeling_subjects/f/7/p/155395/1701192.aspx#1701192  .

I'm sure GM will make a fine model. My biggest criticisms of the kit: the two missing triangular boards that should span the gunnels at the bow and stern, and the badly compromised molding of the deck knees. But in most respects it's a mighty fine replica of the Gokstad Ship - one of the most accurate sailing ship kits (plastic or wood) on the market.

I won't talk about that gawdawful cartoon that Revell Germany insisted on adding to the sail. I see the Revell Germany website now offers two versions of it: one with that travesty and one without it: http://www.revell.de/en/products/model-building/ships/sailing-ships.html . Close inspection reveals that, in the boxtop painting with the cartoon, it isn't drawn in perspective. Apparently somebody slapped a decal on a copy of the painting. Sheer advertising foolishness.

That site also refers to a movie called "Northmen: A Viking Saga."  I found some stuff about it on the web, but I haven't seen any sign of its being in any theaters in my neck of the woods. In any case, the trailer suggests that little of it takes place on board ships.

I retain very fond memories of that little Aurora "Viking Ship" kit. It was one of Aurora's first three ship kits, back in the early fifties. (The others were the "Black Falcon Pirate Ship" and the Chinese junk.) I remember building it several times, between elementary school and high school. Dig those wonderful figures, with their horned helmets! And that great dragon's head on the bow! Unfortunately the thing bears scarcely any resemblance to a real Viking ship. In those days model companies weren't particularly interested in historical accuracy; that kit apparently sprang from the imagination of somebody who had no idea what the real things looked like. Imagine how big that dragon head would be full-sized - and how much it would weigh. And anybody who's read even a little about Norse history knows that the horned helmet is NOT part of Norse culture. (It apparently originated in German mythology, which shared several myths and characters with Norse myths.)

Anyway, good luck, GM - and you too, Mike!

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    September 2012
Posted by GMorrison on Sunday, January 3, 2016 3:32 PM

A couple of questions, as my available material is just Landstrom and the internet.

Dr. T when you refer to little triangular pieces at the ends, I think I can see one of them in your model, maybe about 3' long and flush to the gunwales. Landstrom doesn't show this in his rendering of the G ship, but includes something like it in the line drawing of the O ship.

The kit had a little steersman deck and an open bilge in the bow ahead of a little bulkhead with an oblong hole in it. Whats the hole for?

I played around with scale and got 1/64 overall length, and about 1/70 maximum width. But then the listed dimensions on line are kind of all over the place. it doesn't really matter, I'll call it 1/64. I am replacing the mast and the yard, the former because I don't want to deal with the seam, and the latter because of all the cast on detail.

I went down to the hardware store to buy a little V gouge, but they didn't have any. So I think I'll pass on the ends of the strakes. Maybe play with the paint on that one.

 Modeling is an excuse to buy books.

 

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Sunday, January 3, 2016 3:51 PM

Well....My set of teensy wood carving tools was made by Dockyard Models; I think Ramelsen has now taken them over. Woodcraft carries the new Ramelsen versions, and, as it happens, is selling some of the old Dockyard ones at clearance prices: http://www.woodcraft.com/search2/search.aspx?query=dockyard . Nice tools; I use them almost every work sitting.

I'm honestly not sure what that hole in the bulkhead is for. But it matches the real thing.

You got the triangular boards right. If I remember right, I cut them out of the parts for the stand (which I didn't use), so the "wood grain" would look consistent.

The most detailed source on the Gokstad ship - and an excellent one for modeling purposes - is The Viking Ships, by A.W. Brogger and Haaken Shetelig. It contains nicely-reproduced plans that match the Revell kit perfectly. New copies are pricey, but used ones can be found on the web for very reasonable prices: http://www.bookfinder.com/search/?ac=sl&st=sl&ref=bf_s2_a1_t1_1&qi=j7nD4q6ZIfjE9A6jBqhhgXCWJp0_1451857756_1:768:1988&bq=author%3Da%2Ew%2E%2520brogger%26title%3Dviking%2520ships%2520their%2520ancestry%2520and%2520evolution . Note that Bookfinder's prices include shipping.

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    September 2005
  • From: Illinois: Hive of Scum and Villany
Posted by Sprue-ce Goose on Sunday, January 3, 2016 3:51 PM

jtilley

.............

..................Imagine how big that dragon head would be full-sized - and how much it would weigh. ............

Speaking of Dragon's heads, 
I'm not a cable tv viewer and was unaware of the Vikings series.
 
I found this screen shot of a viking ship in the series (CGI, of course ) .
 
Thought it might amuse you.Whistling
  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Sunday, January 3, 2016 4:06 PM

Hmmm. Well, they got some things right, such as the clinker hull planking. And the dragon head is barely believable - though he seems to have some distinctly twenty-first century characteristics.

What I can't buy - or forgive - is that they put the steering oar on the PORT SIDE! I thought everybody knew that the Vikings put it on the other side - thereby originating the term "steerboard side," later corrupted to "starboard." I learned that in high school. Sheesh.

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    September 2012
Posted by GMorrison on Sunday, January 3, 2016 4:23 PM

Thank you. There's a Woodcrafter not far from here.

It looks like you also replaced the knees on either side of the crone. Revell fooled me- they call those bands over the crone to be painted metallic, so I thought they were iron.

Of course they aren't, I should have known better, but I did carve them off.

 Modeling is an excuse to buy books.

 

  • Member since
    September 2012
Posted by GMorrison on Sunday, January 3, 2016 4:27 PM

Interesting detail I found reference to-

"At the same time it is so arranged that the rudder neck could be loosened or trade fast quite easily whenever the rudder had to he lowered or raised. This was done by means of a rope, tied to a cramp on the lower aft. end of the blade. This little cramp is still intact on the Gokstad ship."

 Modeling is an excuse to buy books.

 

  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Sunday, January 3, 2016 5:17 PM

Gees, I have sooo much to learn in the way of nautical terminology! I couldn't find "crone" with a quick Google search but in a minute or two I found this:

http://vikingships.tripod.com/constructionmethodspg3.html

So now I know - it's a supine, dead, ugly old Oak hag who holds up the mast.

GM, I still don't get why you carved the knees off - I haven't opened my kit yet so I suppose they're not shaped the proper way?

For JTilley: John, at the risk of going a little off topic, I used the address you supplied to see both sail versions of the Viking ship kit on the Revell site and, while there, noticed the 1/150 USS United States. I'm sure it's been discussed at some length on FineScale but, if you'd be so kind, would you let me know if you think it's a kit worth building?

Mike

 JTilley, nevermind - belay that request! I just found this: http://cs.finescale.com/fsm/modeling_subjects/f/7/t/46955.aspx?page=1 

which pretty much answers the questions I had.

Mike

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    September 2012
Posted by GMorrison on Sunday, January 3, 2016 5:24 PM

1943Mike

GM, I still don't get why you carved the knees off - I haven't opened my kit yet so I suppose they're not shaped the proper way?

 Modeling is an excuse to buy books.

 

  • Member since
    March 2009
  • From: brisbane australia
Posted by surfsup on Sunday, January 3, 2016 5:50 PM

And a nice Kit to boot. Looking forward to watching this one.....Cheers mark

If i was your wife, i'd poison your tea! If Iwas your husband, I would drink it! WINSTON CHURCHILL

  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Sunday, January 3, 2016 5:56 PM

OK, now I see what the knees look like on the Gokstad ship. I gather you'll be making them more like those. How about the cross pieces that butt up against (where the mast lock is) and go over the crone? It looks like you took those off as well.

Mike

Edit: I now see that the kit shows an overlap coming off the crone over the cross pieces. I suppose you'll be correcting that to better represent the Gokstad ship?

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    October 2015
Posted by ModelMan68 on Sunday, January 3, 2016 7:07 PM

GM,

I love it!! The best way to relax. Please post more WiP photos.....I can't wait too see waht you do with it.

Jeff     

a.k.a.  ModelMan68 

 

ON THE BENCH:  Spending Time With Family and Friends Big Smile

 

 

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Sunday, January 3, 2016 7:44 PM

For what it's worth, I didn't make any changes to the "crone." I think Revell got it just right. I don't remember the painting instructions, but maybe the arrow for the metallic paint pointed to the spike heads? Or maybe the painting instructions were compiled by he same nincompoop who drew that decal for the sail. 

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    June 2003
  • From: Cavite, Philippines
Posted by allan on Sunday, January 3, 2016 8:41 PM

This kind of relaxation activity is the kind that would give me stress. Watching someone build these is nice, though. Gimme them stealth ships...

No bucks, no Buck Rogers

  • Member since
    September 2012
Posted by GMorrison on Sunday, January 3, 2016 9:36 PM

jtilley

For what it's worth, I didn't make any changes to the "crone." I think Revell got it just right. I don't remember the painting instructions, but maybe the arrow for the metallic paint pointed to the spike heads? Or maybe the painting instructions were compiled by he same nincompoop who drew that decal for the sail. 

 

The latter, I'm sure. I wish I'd left the crone alone, but at the time I was thinking iron bands, lead foil, and so on. Oh well, it still needed better knees or whatever they are called on the inboard side.

 Modeling is an excuse to buy books.

 

  • Member since
    September 2012
Posted by GMorrison on Monday, January 4, 2016 3:47 AM

After a long evenings work with basswood and a sharp knife or ten.

I'll smooth it all out with sanding sticks once the glue hardens.

 Modeling is an excuse to buy books.

 

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Monday, January 4, 2016 10:05 AM

It looks really good and nice progress.

I see you have The Chopper there. Yes

  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Monday, January 4, 2016 12:12 PM

Holy mackerel GM, that's a LOT of work! Very nicely done.

Mike

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    September 2012
Posted by GMorrison on Wednesday, January 6, 2016 2:52 AM

 Modeling is an excuse to buy books.

 

  • Member since
    July 2013
Posted by steve5 on Wednesday, January 6, 2016 3:13 AM

very nice work gmorrison , can't wait to see your progress on this one.

 

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Wednesday, January 6, 2016 3:37 AM

Lookin' great. One little suggestion: those two triangular boards at the extreme bow and stern have little scallops cut in their inboard ends. Here's a picture that shows one of them (though you have to look pretty carefully): https://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0ahUKEwj8v56v8ZTKAhXIQCYKHSdWBRAQjRwIBw&url=https%3A%2F%2Fwww.flickr.com%2Fphotos%2Fzug55%2F9681349993&bvm=bv.110151844,d.eWE&psig=AFQjCNEGzOd6gquwJnNUXx1H34xdafAWLg&ust=1452159341688166 .

Easily done in a few seconds with an X-acto knife.

I'd forgotten about those little missing frame pieces on the sides. I made them just like you did - with styrene strip.

The tiller on the ship now is a reproduction. The original still had some traces of gold paint on it. It is/was the most heavily ornamented feature of the ship.

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Wednesday, January 6, 2016 7:23 AM

Looking good GM. I am guessing those 3 t-bar structures are for the sail to rest on when its lowered?

Eric

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.