Reale De France

Thank you gentlemen. I really dreaded this phase, but the starboard outter railing (for lack of proper nautical terms) is installed, pictured here is the seam and looks ok.

This overall shot looks fine, but the rib where the two meet does have a rise to it, creating a slight crown and after much sanding, while far from perfect looks ok.

Started adding the ring bolts to the hatches.

The colours really pop. Love the work so far.....Cheers Mark

Fantastic build! great colors.

Thanks Steve, mines not quite ready for the belt sander yet..lol.

Not much of an update, but sure glad I have the ribs done, both beams for the benches and the lower starboard beam.

Michael D.

Michael,

I’m definitely pulling up a chair for this one. Looks beautiful so far. I had a good laugh when I saw your ur painting table, it looks pretty much like my old one that I just recycle. After 40 years of painting, it was getting pretty rough.

Steve

Steve for the most part the fit is great, but when you're dealing with trying to line up 70 pieces some are bound to be off, in this case the ones about midship above the stand off are the ones in question, being a bit thicker they do not bend as easy.

Thanks for the compliment Mark and the info, I'll check it out.

Michael D.

Some nice work you have going Buddy. If you are after Galley Info try the Barcelona Maritime Museum in Barcelona Spain. They have a preserved example there on display similar to Reale de France.....Cheers mark

that's unusual about the height's , alway's thought this was a pretty good kit .

Thank you Steve. I have all 70 starboard ribs installed, there are some variances in height concerning about 10 ribs that will require me to make a cut in order for the rib to be brought up to mate with the bottom of the rail, the modification though will be hidden when the deck is installed underneath the ribs. The bench rail is secured and a dry fit test of a seat.

Michael D.

nice mate.

Thanks for the picture Anthony, I've seen similar pics like that too, I've ordered a book "The Ship" by Bjorn Landstrom that hopefully will give me a better understanding of Galleys. Started the tedious process of prepping, painting and installing an endless amount of ribs.

This seems to be the best picture I could find of the cannon arrangement on the bow of the REALE DE FRANCE galley. I would assume the tackle and breech ropes would be the same as the convential placement for cannons of that same time period.

Happy modeling.  Crackers   

A small update, I have the main deck in finally along with a few other pieces and have the big cannon assembled, I'd like to add the tackle and breeching ropes to this later on, but unsure how they would be rigged on a Galley and I haven't been able to find any info.

Michael D.

Thank you Steve, For this deck since I wanted something darker I based it with desert yellow followed by acrylic raw umber and no need for a black wash, for a lighter deck I would base it with white and use raw seinna and a black or red brown wash.

The base is completed.

Michael D.

l D.

your attention to detail is great michael , what process did you use for the wood colouring mate .

steve

Thank you Mark. The base is built and will be stained and the standoffs will be gold leafed, also the evolution of the narrow middle deck...all in all looks ok.

Michael D.

The Gold really stands out against the Royal Blue. Lovely work.....Cheers mark

Thank you overcast451. With the decorations completed on the hull the next phase will the main decks. Cheers!

Michael D.

Nice detail :) Really like those colors too.

A few more pieces gold leafed, the bulkhead was a real pain!!, some touch up left to do, but overall happy with the result.

Michael D.

Thank you gentlemen, Anthony that's what I'm aiming for...we'll shall see. That is a beautiful model.

The rudder is completed minus a few touch ups.

If your construction will be as impressive as this photo, I will be following your post with great interest.

Happy modeling     

Coming along nicely. Will be keeping a close watch.

Jim  

your motoring along on this build michael . very nice .

Taking a much needed break from gold leafing I turned my attention to modifying the rudder, the gudgeons are fashioned from left over sprue that looked to be the right diameter, approx 2.00 mm, 1.19mm brass rod is used for the pintle, although still in the roughing in stage it looks ok.  

The fore deck is also installed at this point.

Michael D.

Thank you gentlemen. David I ran across that thread..( awesome build) while searching for info and gave me the idea to try it.

Don I plan on displaying it in some other fashion then with the oars fully extended out, just not sure exactly how yet.

Michael D.

I built that kit several years ago.  Now I have a problem.  I built it with the oars out and the sails furled.  I put it on a base wide enough to protect the oars, about sixteen inches.  It will not fit on any shelves or in any cases I have!  It is in a box in the basement.  I'm looking for a home for it.

This should be interesting!

Someone built this kit here on Finescale a couple of years ago...it was fun to watch.

I actually have this kit in the stash, and I've been waiting for the inspiration to build it.  It's quite a rare kit, and unusual to see a build....I'll also be following with interest.

Cheers,

Dave

Agreed. Will be watching this one with interest.....Cheers Mark

with your skill's on this kit , it should be an awesome build michael . look's like you are off to a good start mate .

steve5