SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Advice for a FNG

996 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2007
  • From: Bridgeview, Illinois
Posted by mg.mikael on Monday, May 24, 2010 11:22 AM

A good brand to start off with in 1/48 scale(which I recommend to all beginers) is Tamiya. Ease of assembly, not alot of parts, and interesting subjects. Though if you do want to start off with the 1/35 scale then check out either Tamiya once again, or the Trumpeter KV series of tanks. They are usually recommened to modelers sarting off because their's no camo required, not alot of roadwheels, and relatively simple and fun builds.

"A good plan executed now is better than a perfect plan next week." - George S. Patton

  Photobucket 

  • Member since
    May 2010
Posted by mjnbegins on Sunday, May 23, 2010 8:48 AM

Thanks for the help on that one.

Do you have any advice on model brands (Tamiya, Revell, etc) for the beginner?  I imagine some brands are more forgiving or more suited for beginners.  I'm interested in 1/35 scale.

Thanks.

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Saturday, May 22, 2010 5:43 PM

Welcome Sign to the forums, enjoy your new found hobby!

Frank 

 

  • Member since
    December 2007
  • From: Bridgeview, Illinois
Posted by mg.mikael on Saturday, May 22, 2010 3:13 PM

Welcome Sign to the forums, mjnbegins!!! Hope to see you around!

"A good plan executed now is better than a perfect plan next week." - George S. Patton

  Photobucket 

  • Member since
    February 2003
  • From: A Spartan in the Wolverine State
Posted by rjkplasticmod on Saturday, May 22, 2010 1:30 PM

Welcome to the Forums Welcome Sign.  I can't add much to the good advice already given.  The two Shep Paine books, referenced by Hans, although somewhat dated are really all you need to get started. 

Regards,  Rick

RICK At My Age, I've Seen It All, Done It All, But I Don't Remember It All...
  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Saturday, May 22, 2010 12:18 PM

Howdy and Welkommen!

Well, for a beginner, there's an EXCELLENT book that will fit your needs, a must-have (IMHO) for the new armor modeler... I have it, and have had it for about twenty years, and I still refer to it at times...

The book is titled "Modeling Tanks and Military Vehicles", by Shepard Paine and is available through the Kalmbach Books website, or, if you're a "thrifty" chap like me, you might find a used copy for cheap at Amazon.com... The other book that's a must-have (again, IMHO) is Shep's other book, "How to Build Dioramas"... 1st Edition is probably cheaper, but the 2nd Edition includes a bit more inofrmation, but it's mostly advanced-level stuff.  But don't let that stop you from getting it.. 

Here's a link to the Amazon site. Looks like there's a few copies left:

http://www.amazon.com/Modeling-Tanks-Military-Vehicles-Sheperd/dp/0890240450/ref=sr_1_1/102-9370310-9224930?ie=UTF8&s=books&qid=1185569247&sr=1-1#noop

And a link to the other book (My personal modeling Bible too)

http://www.amazon.com/How-Build-Dioramas-Sheperd-Paine/dp/0890241953/ref=sr_1_1/102-9370310-9224930?ie=UTF8&s=books&qid=1185569293&sr=1-1

 

Also, here's a link to some of Shep's work, which include his diorama tip sheets:

http://sheperdpaine.com/monogram/index.htm

http://sheperdpaine.com/monogram/Ostwind_sheet.pdf

Any questions, you can PM me (Start Conversation) and I'll be glad to answer.  So will a lot of other guys around here...

Again, Welcome to the funny farm!

 

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Saturday, May 22, 2010 11:38 AM

Welcome SignGetting started here in the hobby is pretty easy. For basics,a hobby knife, some sanding sticks, a set of sprue clippers, and a bottle of liquid model cement will cover 99% of your needs. Pants are best purchased on an as needed basis depending on your subject matter.

Welcome aboard and above all, have fun!

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    May 2010
Advice for a FNG
Posted by mjnbegins on Saturday, May 22, 2010 11:15 AM

Hello!

I am new to the hobby and would like to get some advice for beginners.  Is there a user-friendly website, book, etc that I can reference for what tools, paint, etc I need to get started?  I want to concentrate on WWII armor and figures.

Thanks!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.