Painting 1:700 clear plastic airplanes.

I tried to mask the cockpit with Micro Mask, then first primed with black and then with white. After that I handpainted the other colours. 

When you prime black first the cockpit look so much more realistic.

Even as I had some problems with paint loosening (due to bad primer in to thick layers, I think), the result is promesing.  

//Antesyd

Silver,

So you do a lot of scratch building then? Where do you get the plans for them? Is their a ship magazine such as for armor and aircraft?

Thanks for all of your help, it is greatly appreciated!

Earl

Thank you for the tip Silver. Who makes the Yorktown which you built? That carrier has a lot of history and it would be neat to build a model of it.

Earl

Don,

I saw on the news that you were buried with 19" of snow!! I like the PBY which they now have in their line and I saw it built without the covering at a hobby shop in Atlanta. Very impressive, I may have to look into it.

Best regards and keep that snow where you are.

Earl

Alpha 43

I built a lot of those stick models when I was a young kid.  They were a lot of fun, I'm surprised that my family and myself survived all of the dope( paint ) back then.

They're still available and better than ever. I still occasionally build one.  They went from having to cut out ribs and formers from the sheetwood yourself, to die-cut, to now laser cut which works much better than the die-cut, especially at the time in the run when the dies start getting dull :-(

I did not know about Rick Jason, what a shame. I will have to check Amazon to see if they have the DVD's.

Earl

I built a lot of those stick models when I was a young kid.  They were a lot of fun, I'm surprised that my family and myself survived all of the dope( paint ) back then.

Wow, Combat was my favorite show when I was a teenager. Too bad about Vic, that was a terrible way to die. I used to play until my friends who played, passed away.

"Fair winds and following seas," with your nautical modeling experiences!

As for chess, I used to dabble in it in junior high (loooong ago).  And wasn't very good at it, besides.

"Checkmateking02" comes from "Combat!," the old TV show from the '60's with Vic Morrow and Rick Jason.

Thanks Checkmate,

I had intended to use the MicroSet as I always had good luck with it when I was building my model trains.  But after your experience , I will now use water to set the decals.I will post a picture when I have one completely done. Do you play chess?

Regards,

Earl

I have several 1:350 ships waiting to go into the shipyard for building. I just finished building the 1:400 Titanic and it is waiting for the acrylic case I am building for it. Then it's off to my armor for awhile.

Thanks Tex,

Earl

I think we all need a little bit of levity and not take ourselves so seriously. After all, modeling is supposed to be fun.

Earl

Falcon,

I like your style! This is one suggestion that I have not received before. Do you think that the pro modelers are keeping secrets such as this one from us? My wife thinks that I am losing my mind as I just ordered the decals for these planes.

Earl

Alpha 43

Checkmateking02,

Thanks for the tip about the optometrist, I may just need one. I was not aware of Starfighter Decals, I am going to check them out.

Earl

I got started in the days of wood model kits.  A few of the topnotch kits did have transparent canopies, but most did not.  The question of what to paint them was a big thing.  Some modelers used black, some used light blue, some used silver.  With any color, what the background was determined how well it looked. In a model show you often didn't know what color the ceilings would be.  If it were a windshield, like a bomber or airliner or multi-passenger light plane, gloss black was a good bet, but for canopies really nothing looked that good.  So to me the use of transparent material for aircraft to be carried on a ship is great.  I have bought aftermarket planes just because of that, when older carrier kits featured opague plastic planes.

Falcon10275

oh man, 1/700 is really really small.  There really only is one way to tackle this problem, and that is make the aircraft bigger, then shrink them back down.    First to get those little suckers bigger , you are going to need a bucket full of propyl alcohol.  Then stir in corn starch and 2/3 liters of superPlex.   then put your airplanes in and let sit over night.    in the morning they will have grown to 1/48 scale.   now paint them and finish them.   Now you have to shrink.  This is the tough part.  take your planes and lay flat on parchment paper.   Take a spay bottle and spray  tropical tan tanning lotion all over model.  Now lay out in sun if the humidity is less than 45%.  After 72 hours the planes will have shrunk back down to 1/700.   there ya go.

You're drunk, right? 

oh man, 1/700 is really really small.  There really only is one way to tackle this problem, and that is make the aircraft bigger, then shrink them back down.    First to get those little suckers bigger , you are going to need a bucket full of propyl alcohol.  Then stir in corn starch and 2/3 liters of superPlex.   then put your airplanes in and let sit over night.    in the morning they will have grown to 1/48 scale.   now paint them and finish them.   Now you have to shrink.  This is the tough part.  take your planes and lay flat on parchment paper.   Take a spay bottle and spray  tropical tan tanning lotion all over model.  Now lay out in sun if the humidity is less than 45%.  After 72 hours the planes will have shrunk back down to 1/700.   there ya go.

Checkmateking02,

Thanks for the tip about the optometrist, I may just need one. I was not aware of Starfighter Decals, I am going to check them out.

Earl

Earl,

welcome to the world of 1:700 aircraft!

Really, they aren't that bad.

In addition to the build Greg mentioned (thanks, Greg, by the way) I recently did four SBD Dauntlesses for USS Enterprise.  You can find them here, at Clemens's "Pacific Carrier Aviation GB":  cs.finescale.com/.../157781.aspx

I'll have to do more for the flight deck.

I haven't done any modern jets (although I have USS Nimitz waiting in the closet), but masking canopies shouldn't be too much different.

Good luck with them; and keep a good optometrist handy.

Thanks Rex,

I really not looking forward to painting these small planes. But, I know that it needs to be done. Or I could leave them clear and say that they are the latest in stealth technology.

Earl

They make them in clear so that you can paint them in two or three layers as I posted.

The other options are colored plastic, which means you have to choose a paint for the canopy area that you think looks like a clear canopy when finished, or cutting off the canopy and making clear replacements. Clear plastic is actually the easiest way to provide the simplest option.

By the way, I have tried Silver paint, Metallic Blue paint, and the Gold metal decals,,,,,,unless you hit on just the perfect color that no one else has tried, you probably won't like the "paint that area shiny" method when you go back and look at your model two weeks after you finish it.

If you ever do a 1/350, you can then use separate clear canopies and get interior photo-etch sets from White Ensign Models and Gold Metal Models. Then you only have to paint the aircraft like a 1/48th kit,,,,,,,,,including reaching down into the cockpit with your brush.

Rex

Alpha 43

Greg,

Thanks for the link. I found it to be interesting and informative.

Earl

Glad to hear. You're welcome, Earl.

I was wondering about the type of material used. Also, why in the world do they make them in clear material?

Thanks Don,

Earl

Greg,

Thanks for the link. I found it to be interesting and informative.

Earl