SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Desk Lamp

5995 views
25 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2014
  • From: SoCal
Desk Lamp
Posted by keithace on Sunday, May 10, 2015 10:08 PM

What desk lamps do you guys use? I want to find one that doesn't put out alot of heat.

  • Member since
    July 2014
Posted by modelcrazy on Sunday, May 10, 2015 10:29 PM

I use an old broken magnifier lamp with a incandescent 40w bulb and a reflector made from aluminium foil. I don't have any problem from heat although I'd love to update it. I like the light from incandescent rather from fluorescent though.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Sunday, May 10, 2015 11:09 PM

Ott light. Only way to go. Natural lighting without the heat.

 

 

  • Member since
    December 2011
Posted by Chrisk-k on Monday, May 11, 2015 5:16 AM

Nathan T

Ott light. Only way to go. Natural lighting without the heat.

Right on!

Iwata HP-CS | Iwata HP-CR | Iwata HP-M2 | H&S Evolution | Iwata Smart Jet + Sparmax Tank

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Monday, May 11, 2015 8:28 AM

I use a ring light magnifier/lamp.  Fluorescents put out a lot less heat for the amount of light than do incandescents.  I find find modern fluorescents okay on color.  The lamp is quite positionable too, with adjustment clamps at several points. I find this important when painting.

Don Stauffer in Minnesota

  • Member since
    January 2012
  • From: Barrie, Ontario
Posted by Cdn Colin on Monday, May 11, 2015 2:21 PM

I put an LED bulb in my regular swing-arm reading lamp.

I build 1/48 scale WW2 fighters.

Have fun.

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, May 11, 2015 2:58 PM

I have a couple of standard swing arm reading lamps and use daylight builds. They do give off a bit of heat but I like the light they give out.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    January 2006
  • From: NW Washington
Posted by dirkpitt77 on Monday, May 11, 2015 4:32 PM

I use a 4ft shop light that hangs above my bench on chains. It uses the 4ft fluorescent tubes in the 6500k wavelength to get natural lighting.  Really bright.

Recently at Target I picked up an LED desk lamp for $10 or $15. It's one of the flexible type and the LED in it is pretty bright. Only downside is it casts a pretty small and focused cone of light....probably a foot and a  half in diameter at optimum modeling range, about a foot above the work.

Chris

    "Some say the alien didn't die in the crash.  It survived and drank whiskey and played poker with the locals 'til the Texas Rangers caught wind of it and shot it dead."

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Monday, May 11, 2015 4:46 PM

Ditto on the 4ft. shop light with 6500k bulbs.  Have 2 swing lights (1 on each side) with LEDs in case I need to do up-close work.  One has the magnifier and the other doesn't.

Jim Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Monday, May 11, 2015 9:21 PM

I used to use a high intensity light that ran on car light bulb.  I now use a clamp on

lED lamp and have a shop light hanging above my work area.

What is a Ott light?  I never heard of it.

  • Member since
    February 2011
  • From: St louis
Posted by Raualduke on Tuesday, May 12, 2015 3:27 AM

I don't think I want an improvised explosive device lamp hanging above my head :) mike

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Tuesday, May 12, 2015 9:37 PM

Had one for years and at work too.  There's nothing wrong with th th them attt al.

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Tuesday, May 12, 2015 9:39 PM

Me use flaming torch.  Wife hold when me work.   Ugh.

Gimme a pigfoot, and a bottle of beer...

  • Member since
    February 2003
  • From: Green Bay, WI USA
Posted by echolmberg on Wednesday, May 13, 2015 8:50 AM

I'd love a good lamp that pumps out the BTUs!  My workbench is in the basement where it's pretty chilly all year 'round.  Having a lamp down there would not only give me better lighting, but it would also help keep me alive.

Eric

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Wednesday, May 13, 2015 11:50 AM

Try fire.  Mighty hot.  

Devil

Gimme a pigfoot, and a bottle of beer...

  • Member since
    February 2003
  • From: Green Bay, WI USA
Posted by echolmberg on Wednesday, May 13, 2015 2:33 PM

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Wednesday, May 13, 2015 10:01 PM

"Aye, Laddie, that's the ticket!"

…..Scottie

Gimme a pigfoot, and a bottle of beer...

  • Member since
    October 2013
Posted by infofrog on Thursday, May 14, 2015 8:38 PM

I have two of these lamps .I love them .. They also have natural light .. No heat . Uses very little energy ..

Enjoy

Rick

www.amazon.com/.../ref=oh_aui_detailpage_o07_s00

  • Member since
    November 2014
Posted by Red Jack on Friday, May 15, 2015 11:49 AM

I use a Swing Arm Architect's Lamp I got from Amazon, and I put a 60 watt size LED bulb in it.  It clamps to my workbench and is quite sturdy.

www.amazon.com/.../ref=oh_aui_detailpage_o00_s00

This one is really well made and cost $40.  There are similar lamps available for less, but they use less metal and are flimsy.  Works very well, and the LED bulb does not heat up and may very well outlast me.

"If it looks good, it is good." 

http://mattsmodelsandcomment.blogspot.com/

  • Member since
    April 2014
  • From: SoCal
Posted by keithace on Saturday, May 16, 2015 11:15 AM

that's funny...love that movie...

  • Member since
    February 2003
Posted by Jim Barton on Friday, May 29, 2015 6:28 PM

A fluorescent desk lamp (equipped with a daylight spectrum tube) I found in the dumpster years ago.

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

  • Member since
    December 2004
  • From: Houston, Texas
Posted by panzerpilot on Friday, May 29, 2015 8:09 PM

Nathan T

Ott light. Only way to go. Natural lighting without the heat.

This came up before, on another post and I picked one up per your recommendation. Thanks. They are excellent!

-Tom

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Tuesday, June 9, 2015 9:52 PM

check out GOODWILL from time to time.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    January 2015
  • From: Winnipeg, Canada
Posted by Rob Bye on Tuesday, June 9, 2015 11:09 PM

We've started replacing all our household lighting with LEDs (I won't miss CFLs). For my workspace, I anticipate using three 60w (equivalent) daylight balanced LEDs in the overhead fixture and a couple of task lights. With LEDs available, is there still any benefit to something like an OTT light, with a fluorescent tube?

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Wednesday, June 10, 2015 4:48 PM

Rob Bye

We've started replacing all our household lighting with LEDs (I won't miss CFLs). For my workspace, I anticipate using three 60w (equivalent) daylight balanced LEDs in the overhead fixture and a couple of task lights. With LEDs available, is there still any benefit to something like an OTT light, with a fluorescent tube?

i have 2 6' florescent bulbs over each work station plus 1-2 goose-neck lamps. i use 100w incandescent space heaters (ie light bulbs) because i like the heat as i am in the bunker and it can get cool there, even in the summer. i also have 3 3 bulb fixtures i can move around for more lights. as i have 7 work stations down there, when i turn everything on it looks like a supernova.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    November 2003
  • From: State of Mississippi. State motto: Virtute et armis (By valor and arms)
Posted by mississippivol on Wednesday, June 10, 2015 8:56 PM

I use a small Ott lite and what is probably the ugliest floor lamp I have ever seen. It's a 20 dollar gooseneck floor lamp with a flexible shaft that I can point down towards the desk.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.