SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/350 USS Intrepid

2373 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2013
Posted by tomwatkins45 on Wednesday, November 28, 2018 6:43 AM

I don't think Intrepid, or any of the 27-Charlie Essexes operated Phantoms. The F-4's were kept to the Forrestal and later, larger carriers. The Essex air wings would have been F-8's, A-4's and early on, A-1's.

Hope this Helps,

Tom

  • Member since
    September 2012
Posted by GMorrison on Tuesday, November 27, 2018 9:44 PM

A-1s for sure. A-4D and F-8U.

 Modeling is an excuse to buy books.

 

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Tuesday, November 27, 2018 6:46 PM

Hadn't done any research on her.  Now see she was a light attack and ASW platform, so you are probably correct in her not having any Phantoms aboard.

My bad.

  • Member since
    November 2018
  • From: Edmonton, Alberta, Canada
Posted by k.apland on Tuesday, November 27, 2018 6:23 PM

Really!!?? see i've been searching and searching for pics of her with F4s and i havnt seen any. Then i googled CVW-10 and everything i read was F8 / A4 / A1 / E1 / & of course UH2.... IF there was F4s on her then im set for that cause i have lots lol

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Tuesday, November 27, 2018 5:09 PM

I have gotten some 20mm and 5 inch submarine deck guns in both 1/72 and 1/144 from Shapeways........absolutely beautiful pieces.  If what you are looking at is the same quality, you WILL be impressed.

In '68/69 she should have had F4's on board as well.

  • Member since
    November 2018
  • From: Edmonton, Alberta, Canada
Posted by k.apland on Tuesday, November 27, 2018 5:03 PM

The Larsenal ones are grey-ish plastic and come in a pack of 5, then i found another set by Corsair Armada, little more expensive and you only get 4. Both brands sell the F8 and the A4. I did check out a website, Shapeways, they have 3D printed A-4C, E, F, & TA-4J all with bombs & drop tanks attached....they also have the F8. So i may order some and see what they are like. Im deffinetly ordering deck equipement from them as they have some cool stuff like bombs/drop tanks on carts as well as engines on carts. They have some cool stuff. Cheap to!!

  • Member since
    July 2008
  • From: Summerville, SC
Posted by jeffpez on Monday, November 26, 2018 5:44 AM

Excellent! I've been tempted many times to get this kit but so far have not so maybe you'll be my inspiration. You mentioned finding extra aircraft from Larsenal. Are they molded in clear like the much hated Trumpeter ones or are they in gray?

Best of luck and keep us informed.

  • Member since
    July 2013
Posted by steve5 on Monday, November 26, 2018 3:33 AM

k,apland . to help you post picture's , if you go to the bottom of the forums , you will see testing forums , click onto it  , there is a lot of help there . would love to see this build .

 

  • Member since
    November 2018
  • From: Edmonton, Alberta, Canada
Posted by k.apland on Monday, November 26, 2018 1:46 AM

well i can guaranty you that you will not see a Tomcat on her flight deck!! lol. As far as i know, and correct me if im wrong, but she was decommissioned in 73-74?? So yes the kit is Vietnam-era. I would like to do CVW-10 cruise 1968-69.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Monday, November 26, 2018 1:31 AM

Hello!

Are you goint o show it as a Vietnam-era ship? I sure do hope so!

Good luck with your build and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    November 2018
  • From: Edmonton, Alberta, Canada
1/350 USS Intrepid
Posted by k.apland on Monday, November 26, 2018 1:15 AM

Hi all, well she finally arrived!!! Funny story, it only took 2 days to get from Miami FL to Vancouver BC (THANK YOU USPS!!) .....and then 15 days to travel from Vancouver to Edmonton lmao. Oh Canada post...but thats a different discussion for a different forum lol. I am grateful it arrived with no damage. $350 Canadian, i wont lie, i was worried it would be crushed by the time i got it. Wish i could figure out how to upload pics into this post....just to show how nice the kit is!! I have a Tamiya 1/350 Enterpise (my second one) still in box, and i think the Intrepid, though smaller, has way more detail. She also comes with PE parts. With that, in my research while she made her long voyage to me, i found another PE kit for her. Tetra Models apparently makes a full PE kit for it. So i was like i need that!!! then i looked at the price....lol after $350 for the model im not spending another $200 for PE.....ill be saving that money for the deck equipment that the kit did not come with and extra aircraft to add to the small airwing. The kit only comes with 4xF8  4xA4  4xA1 4xUH2 & 2xE1B. But i found extra F8 and A4 from Larsenal. Anyways, hopefully i can figure out how to upload pics so i can show off this legend and the other very soon after!!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.