SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Helicopter crew

6674 views
14 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2010
  • From: Lexington, VA
Posted by USAFSPOOK on Thursday, March 28, 2013 5:59 PM

FS 36173 is the correct colour for overall grey MH-53s.I have seen it called Battle Grey and ADC Grey.  Not sure what brands you prefer for spraying, but should not be hard to find as it is a common USAF colour and should be available in most paint lines. Humbrol (in tins) is #156, Xtracolour (in tins) is X158.

  • Member since
    March 2013
Posted by kyleSD70MAC on Saturday, March 23, 2013 3:32 AM

Also what spray paint would be the best match for a USAF one?

  • Member since
    March 2013
Posted by kyleSD70MAC on Saturday, March 23, 2013 3:30 AM

I got a 1/72 MH-53 from Italeri. Would any of the above figures work for it? Looking for one that looks like the hologram MH-53 pilot from Transformers: images2.wikia.nocookie.net/.../Movie_MustacheMan.jpg.

  • Member since
    March 2010
Posted by stcat on Saturday, May 26, 2012 3:44 PM

none of the gunner pictures of hmm161 showed the cord.  they used the pivot attachment underneath, but no bungee to the cabin roof.  I did see the cord in another squadron picture, I think hmm 262 or 362

  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Friday, May 18, 2012 10:38 PM

Don't forget to add the monkey belts to keep your gunner from falling out of the chopper and the M60's need bungie straps connecting the M60 to the roof of the cabin. The bungies keep the guns from dissappearing during evasive maneuvers.

stcat

Thanks for the feedback, guys!  Hedging my bets.  I ordered the CMK LRRP F72076 pack and I'lll modify the pilots to sit.  Also ordered their Characteristic Head, hands and Accessories set.   Then I ordered  the CZ set  F72080 from Squadron & finally went on ebay and bought the ESCI elite forces soldier pack (plastic) with has several good crouching M-60 gunners.

I figure between all of those I can make a door gunner and pilots.

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    March 2010
Posted by stcat on Friday, May 18, 2012 7:05 PM

Thanks for the feedback, guys!  Hedging my bets.  I ordered the CMK LRRP F72076 pack and I'lll modify the pilots to sit.  Also ordered their Characteristic Head, hands and Accessories set.   Then I ordered  the CZ set  F72080 from Squadron & finally went on ebay and bought the ESCI elite forces soldier pack (plastic) with has several good crouching M-60 gunners.

I figure between all of those I can make a door gunner and pilots.

  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Friday, May 18, 2012 5:09 PM

From what I saw of the castings for the Vietnam US Infantry figures Pawel there is a definitely a M60 in there so there definitely is a instant M60 gunner position for the Choctaw that the OP is going to be building.

Pawel

Hello!

A Czech company called CMK also has a nice 1:72, Vietnam-era helicopter crew. Some grunts to put in the back too (the name says LRRP but in this scale it might as well be marine recon Big Smile). Hope it helps, have a nice day, and good luck with your project

Paweł

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Friday, May 18, 2012 4:44 PM

Hello!

A Czech company called CMK also has a nice 1:72, Vietnam-era helicopter crew. Some grunts to put in the back too (the name says LRRP but in this scale it might as well be marine recon Big Smile). Hope it helps, have a nice day, and good luck with your project

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Friday, May 18, 2012 4:16 PM

I haven't dealt with them yet but if this talk about needing to expand their warehouse again then business must be booming. But I have a few helo's that need crews and it looks like they might be the only game in town.

stcat

Have you dealt with them before?  I'm a little concerned.  Their website says "

But all pending orders will be send.

It's just bad news for delay...

But I repeat, all orders will be send."

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    January 2009
  • From: San Antonio
Posted by paintsniffer on Friday, May 18, 2012 6:47 AM

I have dealt with that company before. Communication is tricky, but their products are good.. And they will get to you. My last order took 6 months and it appeared most of the problem was the French postal service.

CMK makes a resin set of helo crew figures in 1/48 and 1/72. I have used them before and they are pretty good. They are also much easier to come by.

Excuse me.. Is that an Uzi?

  • Member since
    March 2010
Posted by stcat on Friday, May 18, 2012 6:25 AM

Have you dealt with them before?  I'm a little concerned.  Their website says "

But all pending orders will be send.

It's just bad news for delay...

But I repeat, all orders will be send."

  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Thursday, May 17, 2012 5:46 PM

Best bet is this company

http://www.propaganda-kompany.com/

they have the 1/72 scale helicopter pilots and airborne infantry that you need in both Vietnam era and Modern era.

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    March 2010
Posted by stcat on Thursday, May 17, 2012 9:53 AM

Sorry.  It's a 1:72 Italeri.

  • Member since
    December 2002
  • From: Valrico, FL
Posted by HeavyArty on Thursday, May 17, 2012 9:37 AM

**EDIT:  I didn't read it close enough, the below is 1/35 scale.  I am assuming yours is 1/48 or 1/72 since there is no 1/32 or 1/35 UH-34D.  Sorry, I can't really help much with them.  EDIT**

This thread list pretty much all your options. 

I think the Dragon Vietnam Helo crew would be your best bet.  It comes with both a free M60 and an M60D in an M23 doorgun mount as well.  It has both pilots and doorgunners included.

Gino P. Quintiliani - Field Artillery - The KING of BATTLE!!!

Check out my Gallery: https://app.photobucket.com/u/HeavyArty

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." -- George Orwell

  • Member since
    March 2010
Helicopter crew
Posted by stcat on Thursday, May 17, 2012 7:50 AM

Putting together a UH-34D.  I'm trying to find a decent pilot and a door gunner (maybe an M-60 setup as well).  Can anyone recommend a vendor?

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.