How do I make decals look real?

first, lay down a coat of future, put the decals on, lay on another coat of Future, and then your choice of clear coat

You can also (carefully) apply any weathering/chips/scratches you're doing to the model itself, to the decals...

Thanks,

QUOTE: Originally posted by SSgtD6152 So I need to go to a model shop, and ask for flat coat and gloss coat.

Yes that will be your best bet. clear dull coat or Flat coat.

In addition to HeavyArty's method you cuold add:
- a gloss coat over the decal before applying the matt coat
- use a solution like Micro Sol. This solution makes decals softer and so they adapt better to irregular surfaces.

So I need to go to a model shop, and ask for flat coat and gloss coat.

To get your decals to disappear into the model and look like paint, you first have to apply a glosscote to the area to be decaled. The smother the finish, the better the decal will adhere and the less chance of silvering. Silvering is when microscopic air bubbles are trapped behind the decal and light reflecting off them looks silvery-gray. Once you have glossed the decal area and let it dry, apply the decal, ensuring that all air is pressed from behind it gently with a soft cloth. Let the decal dry and set up for a short time. Once the decal is dry, seal it with a flatcote to blend it into the surrounding area and remove the gloss finish you applied to the decal area. It may take a couple dullcotes to blend it fully. Using this method will prevent silvering and your decals will be permanantly affixed to your model.

What do I use for flat coat ?

Just spray your final flat coat after you apply the decals. That should make them flat and blend with your paint scheme.