SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

HELP!!!!

785 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
mmc
  • Member since
    February 2007
  • From: Newcastle upon Tyne, England
HELP!!!!
Posted by mmc on Saturday, August 25, 2007 11:15 AM
I am just about to start my next dio, and i was wondering if anyone could help me with a couple of things. First has anyone used balsaboard for base building? And do i need to seal the board before i start building my dio. Hope this makes sense!!! many thanks
  • Member since
    August 2006
  • From: The Green "Mountains", Vermont
Posted by IanIsBored2000 on Saturday, August 25, 2007 11:53 AM

Balsa board is pretty thin and flimsy I think.  Great for scrathcubilding diorama parts, not so great for supporting heavy building materials, ie; clay, plaster, dirt/wahtever else you use. Other members can probably help you more. Smile [:)]

-Ian

"Scanlon: work your knobby hands on the table in front of you, constructing a make-beleive bomb to blow up a make-beleive world."
  • Member since
    May 2007
  • From: The Socialist Republik of California
Posted by Sic Semper Tyrannis! on Saturday, August 25, 2007 3:10 PM

Balsa is a no-no in my humble opinion. I have luck going to the local hardware mega-store and picking up the smaller scraps of lumber. A quick sanding, staining and polyurethane coat and you are ready to go!

SST

On the losing end of a wishbone, and I won't pretend not to mind. ----------------------------------------------------------- 1/35 Dragon SdKfz 251/1 sMG Various 1/35 Figures 1/35 Dragon Stug III Ausf B. (Balkans)
  • Member since
    January 2007
Posted by the doog on Saturday, August 25, 2007 11:46 PM

DEFINITELY SEAL the wood with a good water seal before you start, or you'll warp the base with your ground material--cellluclay, plaster, whatever...all your hard work for nothing! I give mine TWO coats just to be sure.

Balsa is definitely OUT as a choice for base, too. Too porous, too easily breakable, and too easy to bend and deform. Opt for a more durable wood. 

mmc
  • Member since
    February 2007
  • From: Newcastle upon Tyne, England
Posted by mmc on Sunday, August 26, 2007 3:12 AM
Thanks for all the advive, going to pay a visit to the local hardware store, thanks again
  • Member since
    January 2007
Posted by IYAAYAS on Sunday, August 26, 2007 6:36 AM

are you talking about balsa foam?  I think the foam will be ok, but do not use the "wood" as it will not support the weight.

http://www.balsafoam.com/balsafoam/default.asp

http://www.dickblick.com/zz331/11/

 

 

mmc
  • Member since
    February 2007
  • From: Newcastle upon Tyne, England
Posted by mmc on Sunday, August 26, 2007 12:13 PM
hi iyaayas, it is the wood but its sandwiched between two layers of a fibreglass type material, after doing a bit of research, ive found its the same stuff surf boards are made from
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.