SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Ju-88s 1/48 Hobbycraft

17602 views
19 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Monday, January 25, 2010 2:14 PM

Hans - Thanks alot man! I think I shelled out $10 for this kit about five years ago. Not bad. The way I see it, if you can pick up a kit for $20 or less these days, you're doing good. Revell, Testors and Lindbergh are about the only ones with 1/48 kits below $20 and I've built the hell outta 90% of their offerings. 

Roger that... When a kit approaches 25- 30.00 bucks, I shy away away from, especially it if it's a single-engine 1/48th figher or the like... I'll go a LITTLE higher on multi-engines, but no more than 35.00... I absolutely will NOT pay 40-70 bucks for ANY kit.. For that kind of money, it better fly off the bench, buzz around the room, and land on the shelf when I'm done...

  • Member since
    October 2007
  • From: Rhode Island
Posted by jmabx on Saturday, January 23, 2010 10:01 AM

dcaponell - I know what you're saying about the consistency of the finish. They're usually more spaced and more random. Thing is, I had a picture of a Ju-88 on my pc with tight and consistent squiggles similar to what I did. Looked like a machine did it with an even finer line. I actually randomized (is that a word?) mine a little so that it didn't look too planned out.

Also, check out the length of the lines closely... most of them are short. I've painted my fair share of cars and I figured that the longest line I have on the plane would equal out to about a full cup on a 1/48 spray gun. Wink

Can I find that picture now as proof? Of course not. Big Smile When I do, I'll post it up for you.

I appreciate the comment and criticizm sir. Yes

Jeremy    Propeller

    

  • Member since
    December 2015
Posted by dcaponeII on Saturday, January 23, 2010 8:44 AM

You've definitely got an airbrush and the skills that are up to the task but if you look at photos of that camo scheme I think you've made yours a little too continuous and consistent.  I'm not sure those words are exactly right but the long relatively parallel features of your camo scheme don't match up well with the more random and shorter nature of the finish on the actual birds.  If you take a look at some of the photos in Merrick's book on Luftwaffe camo I think you'll see what I'm getting at.  With some of the older kits like the Hobbycraft models (I have a bunch on my shelf too) about all you have going for you is the finish since there isn't much detailing in the kit itself without a lot of scracthbuilding.

  • Member since
    October 2007
  • From: Rhode Island
Posted by jmabx on Saturday, January 23, 2010 7:53 AM

Len - Thanks! I've got a Dragon and ProModeler Moskito and they look like nice kits. I've never seen a picture of the Moskito in squiggles. If you have a pic of your two birds, I would love to see them.

Hans - Thanks alot man! I think I shelled out $10 for this kit about five years ago. Not bad. The way I see it, if you can pick up a kit for $20 or less these days, you're doing good. Revell, Testors and Lindbergh are about the only ones with 1/48 kits below $20 and I've built the hell outta 90% of their offerings.   

Mike - Thanks! I practiced painting for a couple of hours on two old Monogram Do-335 fuselages I have. By that time, I had it figured out pretty well. I still goofed up in a few (or more) spots but the squiggles hide the mistakes and that's a good thing. Yes

Jeremy    Propeller

    

  • Member since
    March 2009
  • From: Wirral. UK
Posted by Spike190 on Saturday, January 23, 2010 7:35 AM

Jeremy, well done on an outstanding job, to even begin that squiggle must of taken b***s but you've pulled it off very well indeed. I love it Yes

Cheers... 

Mike  Toast

 

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Saturday, January 23, 2010 7:16 AM

I love it!  That paint job looks great, and really sets off the "Agressive" look of the 88 more than the standard green/black green over blue of the bomber version..

I recommend this kit if you find one cheap.

I have an 88 in the boneyard (1/48th AMT/Ertl kit) that needs resurection, but I'd rather build a new one... Just out of curiousity, how much did ya pay for yours? 

 

I bought this one about 15 years ago, think it ran about 7.00...

  • Member since
    March 2005
Posted by philo426 on Friday, January 22, 2010 10:58 PM

It is the Hobby Craft JU-88c that I modified to represent a late-war night fighter.Kit #(HC1605)

  • Member since
    July 2007
  • From: Southern New Jersey
Posted by troublemaker66 on Friday, January 22, 2010 9:32 PM

The solder exhust pipes look good! I love that camo pattern, painted a Pro Modeler Do 217E and a Pro Modeler Moskito with the same squiggles. Excellent work!   Len

Len Pytlewski

  • Member since
    February 2003
  • From: A Spartan in the Wolverine State
Posted by rjkplasticmod on Friday, January 22, 2010 9:01 PM

Beautifully done Jeremias Yes.  Thanks for sharing.

Regards,  Rick

RICK At My Age, I've Seen It All, Done It All, But I Don't Remember It All...
  • Member since
    October 2007
  • From: Rhode Island
Posted by jmabx on Friday, January 22, 2010 8:49 PM

Philo - Is that the Hobbycraft kit and which version is it? I like your camo job and tossed around the idea of one very similar.

Late war Luftwaffe birds have the most interesting paint schemes.

Jeremy    Propeller

    

  • Member since
    March 2005
Posted by philo426 on Friday, January 22, 2010 5:59 PM

Nice job on te cammo! I painted mine to match the rear cover of Squadrons JU-88 in action booklet.   

  • Member since
    January 2003
  • From: 40 klicks east of the Gateway
Posted by yardbird78 on Friday, January 22, 2010 4:06 PM

Very nice work on the Ju-88.  The finish obviously took a lot of time and is truly superb.

Darwin, O.F.  Alien

 ,,

The B-52 and me, we have grown old, gray and overweight together.

  • Member since
    October 2007
  • From: Rhode Island
Posted by jmabx on Friday, January 22, 2010 4:00 PM

Thanks for the compliments! Toast

Like I said before, this was a really fun build. If you're not looking for accuracy, I recommend this kit if you find one cheap. Bare bones, quick and fun.

Frank - I think it took me longer to mask off the splinter than it did to paint the squiggles. Surprise

The canopy was a chore... 3 days it took me. I had to take my time because the framing isn't well defined which makes it very hard to mask. I masked a little , then stopped and came back to it the next day.

Thanks again for the kind words.

Jeremy    Propeller

    

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Thursday, January 21, 2010 9:19 PM

Nice build Jeremy.  That camo looks like it was a bear to apply.  But the finish is awesome

 

JOHN

 

  • Member since
    December 2009
  • From: Fort Worth, Texas
Posted by FastEagle1 on Thursday, January 21, 2010 8:55 PM

Hi Jmabx

Great job on the Ju-88!   A very impressive model indeed. 

Cheers,

Beer

  • Member since
    March 2003
  • From: Rain USA, Vancouver WA
Posted by tigerman on Thursday, January 21, 2010 8:25 PM

Mighty nice camo. That sure sets off your build.

   http://i7.photobucket.com/albums/y269/wing_nut_5o/PANZERJAGERGB.jpg

 Eric 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Thursday, January 21, 2010 7:50 PM

Excellent work Jeremy, sure looks like a real -88 to me!  I bet those squiggles took a while to complete.  Excellent work on the masking too, bet that was as much (if not more) of a chore than the AB work!

Frank 

 

  • Member since
    January 2009
  • From: Springfield, MA
Posted by sk3tch on Thursday, January 21, 2010 7:41 PM

Airbrushing those squiggles looks like a chore...  Nice looking build!

  • Member since
    January 2010
  • From: Tulsa, OK
Posted by DaBarge on Thursday, January 21, 2010 7:39 PM

Very nice looking build. 

  • Member since
    October 2007
  • From: Rhode Island
Ju-88s 1/48 Hobbycraft
Posted by jmabx on Thursday, January 21, 2010 7:32 PM

This is my recently completed Hobbycraft 1/48 Ju-88s. Not a well detailed kit but but it went together with minimal fuss and with a little love, looks alright.

The only major work done was the addition of the exhaust pipes. The kit had no representation of exhaust so I had to wing it. I carved out notches in the nacelles with a file and used flattened solder to represent the pipes. (solder graciously provided by Summit - thank you)

I was trying to keep this a simple and fun build... and it was. For what this kit is, I found it to be very enjoyable. Not at all what I expected but no show queen for sure. Looks like a Ju-88 and that pleases me.

On to the pics and I hope you enjoy... Toast

Jeremy    Propeller

    

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.