SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Messerschmitt BF109 GB 2012

245477 views
1198 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Wednesday, December 3, 2014 6:54 PM

Com'on man, click on the link above!

 

 

  • Member since
    November 2011
Posted by 70gtvert on Wednesday, December 3, 2014 11:55 AM

Is the build still going on? Its been over a year since my last 109. Been building a 1 to 1 scale Cobra Daytona over the interim.  I am working on the Trumpeter 1/24 scale 109 G6 early model for the last few weeks. Saw a lot of nice write ups on what was in the box, but not on built ones. May look nice in the box but sure is a PITA to build. Cowls don't fit right, the air intake is shaped wrong, incorrect head armor in the cockpit, lots of molding marks in conspicuous places and although the detail is fine and to scale, it is easily lost when even lightly sanded which I had to do at the fuselage seams. Plus the plastic is brittle, hard to remove the little bits at the sprue, requiring a bit more putty to correct then I would like to use on a true quality product. That said, I am still going ahead on it but the engine will not be displayed and those hokey wheel strut springs won't be used either. 464474 done season.html

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, December 2, 2014 4:47 PM

VanceCrozier

This thread is making me thirsty want to build another Bf-109

Then looks like you're in luck................http://cs.finescale.com/fsm/modeling_subjects/f/29/t/162908.aspx

Wink

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    September 2005
  • From: Illinois: Hive of Scum and Villany
Posted by Sprue-ce Goose on Tuesday, December 2, 2014 1:10 PM

VanceCrozier

This thread is making me thirsty want to build another Bf-109

You have a handy supply of cat hair for antenna wires...................Whistling
  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Tuesday, December 2, 2014 12:56 PM

This thread is making me thirsty want to build another Bf-109

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Wednesday, September 18, 2013 1:01 PM

I agree!!!!!

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Wednesday, September 18, 2013 11:02 AM

As far as I'm concerned, 109's & 190's should be perpetual GB subjects......... just saying. Geeked

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    September 2011
  • From: Milaca, Minnesota
Posted by falconmod on Tuesday, September 17, 2013 1:56 PM

I went over there and signed up already,  I have a ta152 can I use that for the defenders of the reich group build?  I guess that begs the next question does the term "defenders of the reich"  involve only certain versions of 190's?

John

On the Bench: 1/72 Ki-67, 1/48 T-38

1/144 AC-130, 1/72 AV-8A Harrier

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, September 17, 2013 11:23 AM

Hey John. This one has hit the end of the road. However you can look for one next year for sure. I was talking to pzl66 about a GB for next year because Eduard is coming out with their G series 109's in 14.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    September 2011
  • From: Milaca, Minnesota
Posted by falconmod on Tuesday, September 17, 2013 11:19 AM

Ok,  this may not be a wise thing to do since I have 3 Fw 190's I'm working in another GB. But is this GB a on going GB?  I have a  revell G-10 I'm thinking about starting .

John

On the Bench: 1/72 Ki-67, 1/48 T-38

1/144 AC-130, 1/72 AV-8A Harrier

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Monday, January 21, 2013 5:25 PM

Nice work pzl!! Really nice

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    July 2011
  • From: minnesota
Posted by handiabled on Monday, January 21, 2013 12:58 PM

 

 

                        Your 109 looks awesome!!    Herman agrees too      YesCool  All around great work everyone!!

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Monday, January 21, 2013 12:52 PM

Nice!!

Eric

 

  • Member since
    December 2011
  • From: AZ
Posted by Luft Modeler on Monday, January 21, 2013 12:44 PM

Have to fix a mess up with one of he decals being too far forward.

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Friday, January 18, 2013 10:37 PM

Love those yellow nose 109's!! Looking good pzl66!

Eric

 

  • Member since
    December 2011
  • From: AZ
Posted by Luft Modeler on Friday, January 18, 2013 10:29 PM

coat of future:

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, January 15, 2013 5:17 PM

Ye, now i think about it, it might not be a good idea to put things like that in models. Given that Swastika decals are banned in many places, this would cause a real storm.

Could you please put me down for a Hasegawa 1/72nd 109G-6/R-6. I will be starting it after my Ju 87 and Fw 190, so should be in March.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    December 2011
  • From: AZ
Posted by Luft Modeler on Tuesday, January 15, 2013 10:37 AM

That coin came from collection, would that be something if it did come in the kit! Though some people might find it "offensive"..

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, January 15, 2013 7:48 AM

nice work pzl, don't tell me the coin came with the kit.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, January 15, 2013 6:13 AM

pzl---That looks awesome. Love that interior!!!!

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Tuesday, January 15, 2013 4:38 AM

Looking good!

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Monday, January 14, 2013 8:22 PM

Can't believe how many sweet 109's this GB churned out!!

Eric

 

  • Member since
    December 2011
  • From: AZ
Posted by Luft Modeler on Monday, January 14, 2013 8:13 PM

Little Eduard 1/48 Bf 109 kit:

Better late than never!

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Saturday, January 12, 2013 5:01 AM

Thanks Mustang.

I'm just taking it one GB at a time.

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Friday, January 11, 2013 5:01 AM

What a job! The paint came out great!

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Thursday, January 10, 2013 9:27 PM

Thanks guys,  I will be free handing wherever possible from here on.  I'll happily leave the filter off.

The pitot is dead easy to make, takes less than 5 minutes

You just need to different thicknesses of Microtube, one to fit in side the other. It's available in brass so its easy to cut cleanly with your modelling knife. Drill a hole in the wing leading edge to accept it, then fit the thinner piece inside the thicker piece to the correct length. Fit the whole thing into the hole you drilled and fix it all with CA.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Thursday, January 10, 2013 6:25 PM

Scratch-built pitot tube with micro tubing in 72?! Wow! And it turned out good.

 

 

  • Member since
    October 2008
  • From: Georgia
Posted by Rigidrider on Thursday, January 10, 2013 6:09 PM

Tony... Your free hand came out great and myself, I prefer freehand.

When Life Hands You A Bucket Of Lemons...

Make Lemonade!

Then Sell It Back At $2 Bucks A Glass...

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Thursday, January 10, 2013 5:18 PM

taxtp - that built up nicely Yes

As for the filter, those were used on tropical or desert versions due to the dusty airfields (I believe).  Your scheme looks more temperate, or European if you will - so it looks fine without it.

regards,

Jack

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.