1/32nd Revell Messerschmitt Bf-109 G-6 (Finished)

I have this one in the stash and like you I have just started my very first 1/32 kit but thats a Hasegawa Hein (Tony) and i am finding it quite fun really. I will be following this one with more than just passing interest - Good Luck looks superb so far.

Your doing a fantastic job on this 1:32 109!  I love all of your AM parts, that is so cool.  The detail you put into it is superb.

Toshi

Lawdog, that is a great kit! I am currently in the final stages of finishing up my version of that aircraft, adding the small fiddly bits to it and some weathering. I really enjoyed this build, it was my first 109 I'd ever done and I have to admit I like the way it turned out. I built mine straight OOB, except for the decals, for those I ordered a set from Eaglecals for Erich Hartmans mount. Looking great so far, cant wait to see the finished project!

Very nice indeedy! I've built the "R of G" 1/32 G-10 Gustav and really enjoyed it, and since building it, have been contemplating adding this one to my collection. I will watch with much interest.

Have fun with the rest of your build!

Cheers

Martin

Wow, I got to see my cockpit mentor's first resin 1/32nd cockpit! Pretty cool.

Looking forward to following along. A 109 in 1/32nd does sound irresistable.

Odd you'd mention your apprehension of 1/32. I've had the same thing and have yet to tackle one of mine, which is most odd because I built them back in the old days.

Very cool. I've heard nothing but good things about this kit. I may have to add one to the stash. Super nice cockpit, Joe.

BK

It might not come cheap, but it looks every bit worth it and more.  You've definitely got cockpits down to a science friend...at any scale.  Very nice. =]

I wouldn't worry.  In  your case the bigger scale just makes for a greater appreciation of your work.

Mike

Thanks guys.  Your all way too kind.  

I'm in for a quick update.  I'll tell ya, this thing has been fighting me pretty good.  Before I started this thing, I did some research on other builds of it.  The general concensus was that it was a decent kit that could have been much better.  So far I'd have to agree wholeheartedly.  For some reason, I had issues closing the fuselage around the Eduard pit, eventhough it was supposed to be a drop fit replacement.  This I figured was operator error as these can be tricky sometimes.  After I got it all closed, I went to add the top gun cowl piece. The fit was ok, but my research of other builds said the bottom did not fall on a panel line (one even had pics of the real thing).  So off I went sanding and filling, all while trying to preserve other panel lines around it.  Then it was time to add the cannon blisters.  The kit versions were reported to have inaccurate representations of the rubber seal, so I was provided the Barracuda resin set as replacements.  I had a terrible time getting the starboard side to fit flush and the port side was chipped at the seal.  On the later I ended using the kit blister then I added a strip of .10 styrene to represent the seal.  I was not impressed with the Barracuda set at all.  

The top wings came in two parts.  This area was where I read there were alot of fit issues.  Surprisingly I had no trouble here.  I just filled the panel line (more like trench) and rescribed the panel line back in at an appropriate width.  Then I had issues with the wings meeting the wing roots.  They just wouldn't touch, especially on the starboard side.  I ended up having to use putty there.  The supercharger intake was replaced with the correct Quickboost example too.  A little putty at the joint.  No big whoop...

I do like how all the control surfaces and flaps are all poseable, even the radiators.  A nice touch.  I posed everything!

I think the worst is over.  Soon I'll dust it with primer, check the seams, rescribe missing lines, then start the fun part........painting German schemes!......

Even with all these issues you described, your build looks fantastic!  I'm anxious to see what paint scheme you'll choose.

Toshi

Toshi

Even with all these issues you described, your build looks fantastic!  I'm anxious to see what paint scheme you'll choose.

Toshi

 

Thanks Toshi.  I'm doing the scheme on the box cover.  

Very nice work, again Joe. Watching you add the blisters to the kit makes me see clearly why the pilots referred to this 109 variant as "the boil". Super nice work on a scary scale for me. The size is a bit intimadating. 

BK

The problem with the resin parts not fitting wasn't operator error. It has been my experience that just about ALL resin replacement parts dont fit as drop in parts. I'm currently working on the Revell 1/32 Salamander and none of the so called drop in resin updates made specially for this particular model drop in. I've had to do lots of sanding, grinding and slicing to get things to fit. 

As usual you are turning out outstanding quality in your detailing and build.

I built the same Revell Gustav OOB For the 109 Group Build a while back and had no fitting issues at all. I also found the molded details adequate and just added some pe seat belts. There is some minor shape differences with the bulges and I think the prop blades but to my eyes they looked ok. I also used the included kit decals that were very good.

There is an article somewhere that I read that reviews and compares this kit to others. It also says that you can actually make a couple of variants by simply deleting some of the recessed hatches. 

LawDog - 

All I can say is WOW....absolutely amazing detail on your pit, just amazing! Very well done sir. Bravo LD, Bravo  I believe it was worth the extra money.

Thanks PJ. I've had some drop fit resin cooperate in the past, but like you said  usually there are issues. I'm glad you had better luck with this thing but I struggled. I still have a set of brassin landing gears to add so I'm crossing my fingers. 

Thanks Hunter, your very kind...

Found the article Dog. It's a good source of information and a couple of things can be easily corrected.

http://forum.largescalemodeller.com/topic/1238-132-messerschmitt-bf-109g-6-early-and-late/

I have in my stash the 1/32 ROG G-10 and Trumpy K-4, G-2/Trop and E-7. I also have the Zvezda 1/48 F-2. I guess you can see that I like the 109.

Great read PJ.  Thanks alot.  

Well, I sat down and got this turkey painted.  I intend to do the cover subject, Franz Dorr's JG 5 mount.   I started with a preshading of the panel lines XF-1 Flat Black (I know...my preshading is never pretty) then added the yellow wing tips and fuselage band per Revell's instruction.   

I always add a touch of XF-7 Flat Red to the XF-3 Flat Yellow to make it more RLM 04-like.  It also looks better to me.  

After I taped off the yellow and added the black part to the fuse band, I shot Gunze RLM 76.  I then added XF-2 Flat White and made condensation streaks.  

Then I took my trusty mix of XF-64 Red Brown and XF-1 Flat Black diluted with alcohol and postshaded it until it looked dirty.  

Gunze RLM 75 was next. It also got streaked in the same manner as the 76.  

Gunze RLM 74 was next.  I used rolled blue tac for the demarcation lines on the wings.  Everything else, including the fuselage mottling was done free hand.  I used low pressure ang in close.  I finished it off with another postshade concentrated around the engine and exhaust area.  

 Time to start on the small stuff.   

Awesome colors, it's really starting to look the part. How does it feel to paint a larger scale?

BK

Lawdog,

Looking great there, I built this one a while back (the last 109 GB) and found it to be ok, somewhat tricky on some of the seams, but it was a fun build.  I replaced the MLG with the Brassin copies as I broke both of them in the construction. Will be following your build.

Matt

Thanks Matt. I have the Brassin brass gears on hand so I shouldn't have an issue there. I was also considering replacing the prop hub but I decided I'm going to work with the kit one.  Glad to have you aboard..

Awesome work with the interior, Joe, it looks fabulous! Loving the paint scheme on this one, too. I look forward to seeing this build come to fruition!      

Excellent work, as always! Can't wait to see it finished, as I have one I am itching to build, but don't want to step out of the 1/48 comfort zone quite yet.

-BD-

Looking great Dog. I have that ROG F8 and it's a gorgeous kit. The pit needs some pe cause the molded details are a bit weak there but the engine is a small kit in itself.