SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/48 F-111B (NAVY)

6051 views
15 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Wednesday, June 29, 2016 11:48 AM

Wow! that is really cool. You did an excellent job on the conversion as well as the overall build. I like it.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    February 2012
  • From: Olmsted Township, Ohio
Posted by lawdog114 on Monday, June 27, 2016 10:32 PM
Nice!....

 "Can you fly this plane and land it?...Surely you can't be serious....I am serious, and don't call me Shirley"

 

 

 

 

  • Member since
    June 2004
  • From: 29° 58' N 95° 21' W
Posted by seasick on Monday, June 27, 2016 1:24 PM

The F-111B was an interceptor performing other fighter task such as dog fighting wouldhave been difficult. The F-111B was designed to fire a version of the AIM-47 (later AIM-54) using fire control system that would evolve in to the AWG-9.

Chasing the ultimate build.

  • Member since
    March 2009
  • From: Yorkville, IL
Posted by wolfhammer1 on Saturday, June 25, 2016 8:31 PM

All,  The F14 was developed from the same requirement that drove the F111B, and they used the same engines in the A model as the F111.  However, the F14's inlet was better designed for a fighter airvraft, and performed better than the inlet on the F111, which finally did ok by the F111F model.  Interestingly, the side-by-side seating happened in part due to the length restrictions on a carrier.  As a strike aircraft, the F111 was ahead of its time, and the terrain following system and navigation system was astounding, especially for its day, with no GPS, etc to help out. 

John

  • Member since
    March 2015
  • From: Littleton, Colorado
Posted by harp.ta on Saturday, June 25, 2016 2:18 AM

Nice build! I love F-111's.  I may be wrong but I think the F-14 was basically designed off the F-111.  Same huge size (basically a platform for Phoenix missiles) but a tad lighter (I think they both had the same engine - at least initially - P&W TF-30s if memory serves).  The A's made a nice replacement for F-105s.  I think the Aussies flew them until just a few years ago.

On the Bench:

  • Tamiya 1/48 A-1J Skyraider (USAF)
  • Tamiya 1/48 He-219 A-7
  • Tamiya 1/48 P-47M

In the Fridge:

  • Modern Times Brewing Blazing World
  • Lawson's Finest Liquids Sip of Sunshine
  • Half Acre Gone Away IPA

"Why do they lock gas station restrooms?  Are they afraid someone might clean them?"

- George Carlin

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, June 20, 2016 1:30 PM

Thats really nice and good to see a differant take on the 111.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    May 2010
  • From: Southern Indiana
Posted by sbemo13 on Monday, June 20, 2016 10:34 AM

Pete's Hanger was manufacturer of conversion set. I'm not sure if this is still available. Shawn Bemo

  • Member since
    May 2010
  • From: Southern Indiana
Posted by sbemo13 on Monday, June 20, 2016 10:28 AM

I can't remember who made the conversion set. I bought about 6 years ago. It did come with decals, including Phoenix missile test birds. Shawn Bemo (THANKS FOR COMMENTS)

  • Member since
    June 2014
Posted by BrandonK on Wednesday, June 15, 2016 9:06 AM

Nice to see the 111 getting some love. I miss the old gal from my days in the AF. The 111 is an under appreciated bird. Nice work on an obscure subject like the -B model.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    March 2008
Posted by Caveman on Tuesday, June 14, 2016 7:41 PM

Nice project.  I was looking into doing this conversion but couldn't find the set.  Which set did you use?

 

  • Member since
    March 2003
Posted by rangerj on Tuesday, June 14, 2016 1:52 PM

IIRC Revell did a 1/72 F-111B way back in the stone age. The TFX (F-111) project and the F-4 Fanthom were Robert MacNamerra's (sp) "one size fits all Military services" idea.

The Navy found the F-111 to be to big and to heavy for carrier operations, as well as to complex. The F-111 has had a great service record with the USAF and other air forces.

Like any cutting edge project, e.g. swing wing, ground following radar, capsule ejection, etc. the TFX (F-111) had its problems, as had other great aircraft.

Very nice conversion work

  • Member since
    July 2009
  • From: lafayette la
Posted by 40.mm on Monday, June 13, 2016 3:58 PM

Real sharp looking build . Yes sir a real sharp build !

The vid was neat too..

 

 

 

                                              The Original

                                   Mike Oscar Juliet Oscar

                                              Outcast !

                                End Transmission-Semper Fi !

http://www.vairhead.net/forum/dhg.jpg

  • Member since
    June 2016
  • From: Bristol CT
Posted by XF-15DCC on Monday, June 13, 2016 3:00 PM

Very nice! A lot of extra details with the wings swept open. Now I need to see if there are any pictures or videos of this on a carrier. I know the Navy thought about using them. Looks like time to refresh my memory.

 

edit: Found it: https://www.youtube.com/watch?v=UxDV9y5Is64

 

Kevin

We live in fame or go down in flame. 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, June 13, 2016 11:50 AM

Very nice work! Always love seeing stuff like this that could have been but wasn't. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, June 13, 2016 11:33 AM

Another great job like your Corsair II!  Nice stash and an excellent set of reference material.

Toshi

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    May 2010
  • From: Southern Indiana
1/48 F-111B (NAVY)
Posted by sbemo13 on Monday, June 13, 2016 10:50 AM

I used a resin conversion set. Most of decals are from spare box. If I did this over, I would use Hobby  Boss F-111A. Very few F-111Bs were made. The  Navy decided not to use these. Shawn Bemo

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.