SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Airfix 1/24 Car Door Typhoon - DN323

2383 views
13 replies
1 rating 2 rating 3 rating 4 rating 5 rating
DWW
  • Member since
    December 2011
Airfix 1/24 Car Door Typhoon - DN323
Posted by DWW on Wednesday, November 16, 2016 6:30 PM

Hi folks:

Here's the latest incarnation of the big Airfix Tiffie - the car door version of the kit first released in 2014.

There was scope on this build to include Airscale's great Typhoon decals in the cockpit, along with dedicated Eduard etch. Worth doing, as the view into the driver's home is much greater than otherwise applies to the slider.

 

 

Radu etch augmented the rad area, and Roy Sutherland's resin carb intake replaced the Airfix item. Some masking allowed the areas behind the mesh to achieve depth and contrast by rendering them black.

 

  

 

The car door turtle deck is a precise fit, once the recessed plastic of the slider version is accurately removed. Airfix missed the anti-collision beacon out from the instructions. Note the recessed hole in the image below that needs to be drilled out (if your markings choice carried it). The part is on the clear sprue.

 

 

I've always felt that one of coolest things you can give your car door Tiffie is wind down one of the windows about 2/3rds. On the Airfix kit, the clear plastic door is brittle and easily broken, re-glued, broken, reglued, lol. Self inflicted pain when working to a tight ten week schedule.

The model was displayed by Airfix on their stand at Scale Model World, last week and will join my slider Typhoon on display at the Margate visitor centre. Happy days. :-)

Finished pic to follow.

 

TTFN

 

Steve

 

DWW
  • Member since
    December 2011
Posted by DWW on Wednesday, November 16, 2016 6:31 PM

 

 

Cheers!

 

Steve

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Wednesday, November 16, 2016 8:13 PM

Very nicely done.  I love the IP details that you did.  It really stands out!

Toshi

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

DWW
  • Member since
    December 2011
Posted by DWW on Thursday, November 17, 2016 8:37 AM

Thanks for that T!

 

Best regards

 

Steve

 

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Thursday, November 17, 2016 8:39 AM
Excellent. Especially the desert camo

 

  • Member since
    April 2013
  • From: Eleva, Wisconsin
Posted by Greatmaker on Thursday, November 17, 2016 8:46 AM

Beautiful model.  Thanks for sharing

 

DWW
  • Member since
    December 2011
Posted by DWW on Thursday, November 17, 2016 9:07 AM

tempestjohnny
Excellent. Especially the desert camo

 
 
Cheers TJ:
 
When I was told the test shot was coming my way, AMW editor Chris Clifford, asked what scheme I had in mind for it. My immediate reply was one of the three desert filter trials airframes, sent to North Africa in 1943 to 451 Squadron RAAF.
 
Of the three aircraft originally earmarked for embarkation, none made it - all victims of incident and accident and three more car door Tiffies were duly substituted, DN323 among them.
 
The war in Africa suggested a need for tropicalised Typhoons, so trials lasting roughly April to October 1943 were conducted on two main areas of investigation - the efficiency of an underbelly filter and subsequent, measurable engine wear in the desert theatre. In terms of the former, there are no known photos of the filter actually used in North Africa, although Chris Thomas sent me his entire DN323 image collection, one of which was DN323 in profile at Boscome Down, immediately before crating up. I believe the filter fitted in the image was a 'dry type' prone to catching fire when fuel from the verticle inlet manifold ran back into it and was changed to a 'wet type' that resolved this.
 
The pilot had a lever under his right elbow, that switched airflow from the chin scoop to the belly filter for ground running and take off, this being switched back to the chin once clear of ground debris. As the motors were driven hard on trials, thick black exhaust deposits can be seen in some photos, while in others, this is absent, no doubt cleaned off as a prerequisite to engine removal and strip down. Mine is depicted 'clean', ready for trial.
 
In the end, the demand for Typhoons in Europe and declining German fortunes in Africa, meant the need for operational Tiffies in the desert disappeared. An interesting side note in the type's history though and the chance to render the big scale Typhoon differently to the majority.
 
TTFN
 
Steve :-)   

DWW
  • Member since
    December 2011
Posted by DWW on Thursday, November 17, 2016 12:08 PM

Greatmaker

Beautiful model.  Thanks for sharing

 
 
Cheers G - much appreciated.
 
 
Steve

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Thursday, November 17, 2016 7:19 PM

Sweet!

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

DWW
  • Member since
    December 2011
Posted by DWW on Friday, November 18, 2016 8:46 AM

jeaton01

Sweet!

 

 

Cheers John :-)

 

Steve

  • Member since
    February 2007
  • From: Brunswick, Ohio
Posted by Buckeye on Friday, November 18, 2016 11:21 AM

Beuatiful build, that cockpit is amazing.Toast

Mike

DWW
  • Member since
    December 2011
Posted by DWW on Friday, November 18, 2016 12:55 PM

Buckeye

Beuatiful build, that cockpit is amazing.Toast

Mike

 

 

Thanks Mike.

As I mentioned previously, the open car door gives one of the best cockpit views around, so it was good to enjoy shoe-horning the full Airscale and Eduard suites into it. Some limited use of punch and die bits are necessary for buttons and so forth but nothing major.

The other adaptation was to cut off the reflector sight lens and replace with ultra thin clear card.

 

Best regards

 

Steve :-)

  • Member since
    February 2012
  • From: Olmsted Township, Ohio
Posted by lawdog114 on Friday, November 18, 2016 8:17 PM
Awesome!...I have a Tiffie in my near future. Now I have a guide on how the pit "should" look.

 "Can you fly this plane and land it?...Surely you can't be serious....I am serious, and don't call me Shirley"

 

 

 

 

DWW
  • Member since
    December 2011
Posted by DWW on Sunday, November 20, 2016 9:14 AM

lawdog114
Awesome!...I have a Tiffie in my near future. Now I have a guide on how the pit "should" look.
 

 

Cheers LD but please disregard my use of interior grey-green. The correct finish is silver lacquer. I made this apparent in the AMW write up as a bit of anarchism on my part. :-)

 

Steve :-)  

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.