SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tail of Two Kittys

2020 views
14 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Tail of Two Kittys
Posted by goldhammer on Sunday, June 4, 2017 8:36 PM

I had signed up for the Midway GB, grabbed a Trumpter 1/32 F4F-3, and then found out the only -3's were Marine birds stationed on Midway.  Wanted a carrier based 'Cat, so back to the drawing board.  Enter Trumpter 1/32 F4F-4.  Most kit parts are the same, only differences are in the guns and wings.

Will be doing both at the same time, the -4 will be marked as Thatch's ride from VF-3, Yorktown, and will be using Montex canopy masks, Eduard cockpit PE and Starfighter decals, and set on a carrier deck base.  The -3 will be OOB, with a different paint scheme I have never heard of let alone seen any reference to.  That will be the surprise as it finishs up.

Pics of boxes and contents:

Feel free to follow along and critisize as needed.

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Sunday, June 4, 2017 10:00 PM

Watching and waiting. :)

- Mike Brindos "Lost Boy"

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, June 5, 2017 5:16 AM

I've always wanted to build one of these especially the F4F-4.  Will be following!

Toshi

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Monday, June 5, 2017 9:07 AM

Will get started Tuesday or so.  Veterans appts today and tonight.  Working on an AO claim.

 

You two are just some that set the standards I hope to build to one day.  Don't be afraid to jump in any time with comments, good or bad.

  • Member since
    June 2014
Posted by BrandonK on Monday, June 5, 2017 9:09 AM

Well now, this is cool. I still haven't added one of these to the stash. I'll be watching this one to see which one to get.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Tuesday, June 6, 2017 9:41 AM

BK - Trumpter actually makes three versions of the 'Cat, early and late of the -3 and the -4.  Except for the wings, guns and gun bays the late -3 and the -4, looks like the rest of the parts are the same, including a clear cowl. 

Was surprised that in this scale, and as well detailed as the rest of it is, no seat belts included or molded in. The Eduard cockpit set has belts in it, so would be something to look at adding.  

The control surfaces are hinged with PE hinges and metal pins glued to the control surfaces. Looks like a slick way to make them moveable.

  • Member since
    June 2014
Posted by BrandonK on Tuesday, June 6, 2017 9:59 AM

I may have to add one of those to the stash with the PE parts. I'll be watching this for sure.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Saturday, June 24, 2017 4:55 PM

Got a few progress pics.  The engine for the -4 is done, not ging with the PE ignition wiring, it would frustrate me beyound recognition.

Got a start on the seat for the -4 as well, still have the belts and seat mounts to do.

The main gear bay has 6 pieces glued to the rear bulkhead.  Ready for paint.  Same for both versions.

The office for the -3 was done OOB, with tape for the belts.  Still have to do some paint for buckles.  Otherwise it's done.

Interior of both fuselages have been painted, -3 shown.  Interior Green. 

MM and Tamiya paints will be used throughout.

Pit is -3, other pieces are -4.

 

  • Member since
    January 2017
Posted by damouav on Saturday, June 24, 2017 5:03 PM

Great start, I will be following this build.

In Progress
1/48 Tamiya P47-D Bubbletop
1/48 Hobby Boss TBF-1C Avenger (on hold)
Pending
1/48 Roden S.E.5a
1/48 Airfix Walrus
  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Saturday, June 24, 2017 5:30 PM

Thanks, appreciate it.  Hope not to disappoint anyone.Smile

  • Member since
    November 2016
  • From: Maryland
Posted by iampiper13 on Saturday, June 24, 2017 8:12 PM

Great looking pit!

  • Member since
    June 2014
Posted by BrandonK on Saturday, June 24, 2017 9:13 PM

Wow, that is all impressive work. Very nice.

Bk

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    July 2003
  • From: Cincinnati, Ohio
Posted by ridleusmc on Saturday, June 24, 2017 9:33 PM

YES!  Wildcats!  
The engines and pits are looking great.  

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Sunday, June 25, 2017 5:32 AM

High quality work sir, just superb.  Colors are spot on!

Toshi

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Sunday, June 25, 2017 1:14 PM

Thank you gentlemen, much appreciated.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.