Looks great.

osher

This thread has been very useful, thank-you!

 

Go here to see the finished model: 

http://cs.finescale.com/fsm/modeling_subjects/f/2/t/181649.aspx

Clamps helped keep the landing gear doors in proper alaignment as the glue cured. 

bobbaily

JK-first off, this is a great build-very impressive work with the foil-and all of the other aspects of the build too

addIng weigh-is there room behind the IP to insert BBs followed by epoxy shot in via a syringe?

 

I cut a hole in the front of the nacelle. It will be covered by the spinner.

Then I poured round fishing weights into the nacelle until the nose dropped down. I added a little bit more weights for the heck of it. Next I squezzed some white craft glue into the nacelle to keep the weights from rattling around. Yikes, that was a close call.

JK-first off, this is a great build-very impressive work with the foil-and all of the other aspects of the build too

addIng weigh-is there room behind the IP to insert BBs followed by epoxy shot in via a syringe?

Oh Noooooooooooooooooooooooooooooooooooooooooooooooooooooooooo I made a BIG MISTAKE when estimating the amount of weight needed in the nose to keep the nose down. The model has turned out to be a "tail sitter"  I think I know what happened. When I estimated the amount of weigh to put into the nose I had the landing gear temporarly installed perpendicular to the wings. In actuality, the landing gear is angeled forward about 30 degrees. When the landing gear was glued in place the center of gravity was moved rearward. Now I need to figure out how to fix this.

bvallot

LOL. I do have a P-51D I just started. Some of it will be much shinier than in other places.  Perhaps the next one. I'm unsure how I'd go about brightening up what the foil offers. Maybe I'll do a random experimental one off build of something and leave it in NMF. I think I'd feel good about that.

Are you planning on putting any kind of light wash to some of these panel lines??

 

LOL. I do have a P-51D I just started. Some of it will be much shinier than in other places.  Perhaps the next one. I'm unsure how I'd go about brightening up what the foil offers. Maybe I'll do a random experimental one off build of something and leave it in NMF. I think I'd feel good about that.

Are you planning on putting any kind of light wash to some of these panel lines??

bvallot

That’s starting to look every bit the part Johnny. Well done so far. I’d love to BMF a plane one day. You’re making me think I shouldn’t be so chickensh!t about it and just do it. =]

Looking forward to the finish. 

 

Dude,

Just do it. Do it. Do it Do it. It feels so good.

That’s starting to look every bit the part Johnny. Well done so far. I’d love to BMF a plane one day. You’re making me think I shouldn’t be so chickensh!t about it and just do it. =]

Looking forward to the finish. 

Awesome job!

The KitsWorld decals arrived on Saturday. As usual, the carrier film is crystal clear. Great decals.

I didn't want this plane to look brand new, so I used a Black and Mud wash to dirty up the model. 

The landing gear and landing gear doors have parts that are real fragile. Care must be exercised.

Good news. I just purchased a set of decals from Kits-World. The P-38 is on-hold until the decals arrive from England.

lawdog114

Awesome job! Curious, how did you deal with the molded in nose guns? That looks to be a weak spot in an otherwise awesome kit.

 

I painted the guns black using a very small brush. 

That’s the problem with some decals. There’s the ones with the invisible carrier film and the others that need to be individually trimmed up to the color line. 

Bad news!!!! The decal's carrier film is very visible. I will have to trim away the carrier film from each decal. Since this model is finished in BMF I can't coat it in a gloss clear paint prior to applying the decals. That would make the foil look like a painted surface. 

This is a photo of my B-24J with decals from KitsWorld. The carrier film was crystal clear and required no trimming. Unfortunetly, KitsWorld has no decals for a P-38. They do have decals for a P-51. Maybe I should ust use those.

Now it's starting to look like a P-38. Next will be the Tower of Terror (applying the decals). I have never used Hobby Boss decals. I hope that there will be no problems.

The kit goes together real easy. No big issues unless you intend to foil it  No alaignment issues and no nasty gaps at any seams.

This looks like the P-38 kit I’d like to build. so glad you posted the wip and gave us a tour of assembly!

JK the P38 looks stunning. You did a superb foiling job.

Gamera’s idea works good for lights. Also Hobby Lobby has some Gemstones that come in all sizes and colors that will also work.

You can also use the chrome Mylar found in some snack bags. Depending on the light, I punch out a disk and use it as the reflector inside the lamp.  I recently posted my F20A here and the light can be seen in one of the pictures. 

The foiling is finished, now it's time for final assembly of all the parts.

The radiator pods were glued and clamped to the two booms.

This kit has a really good way of attaching the props to the nacelles. A vinyl tube (plug) is used to hold the prop and spinner onto the shaft. 

Note the vinyl tube.

First, the prop is placed over the shaft and then the vinyl tube is placed over the shaft. This holds the prop in place.  

Then, the spinner is pressed over the vinyl tube. This allows the prop to be removed for transportation of the model. A really ingenious solution!!! I wish other kits did this.

Your efforts were well worth it. Nicely done!

You should be able to tackle the landing light issue with one hand tied behind your back, considering all the foiling challenges you faced on this one!

I like the Krystal Kleer idea.

Oh wow, looks perfect!!! 

I suppose you could just drill out the lights and put some Krystal Kleer in there. Or just paint them silver and put a drop of translucent paint over it. 

The foiling is finally finished. The model went together really easy. Everything lined up perfectly and the booms and wings are perfectly aligned. HOWEVER, this was one big pain in the heinie to foil. My B-29 was less hassel to foil than this kit. So many small panels and curved panels at the wing roots. This kit has one big problem. There are no landing lights!! The landing lights are molded as solid plastic!! Hobby Boss spent a lot of time engineering a nice kit and they did not included clear landing lights. Next, final assembly.