FW190-A3 by Pacific Coast Models (1/32 scale)

Thanks again for followalong guys. Yesterday I finished the base and It's sunny out today so i grabbed a few bright pics. Nothing better than natural sunlight to show the true colors!

Absolutely tremendous build Mongoose. Your 190 looks really sharp. You did a slick job on fixing the minor issues. The sponge chipping looks righteous. I personally use that technique myself and think it produces an excellent effect. Bravo on finishing up this terrific kit.

Looks great! Congrats! Nicely done. I like the Eastern front camo scheme with the early 190. Thanks for the tips. I have this post bookmarked. 

That turned out awesome. That thing is huge too. Very nice work all around and it looks stunning.

BK

Wow thanks for the kudos Joe! I hope this final set does it justice! She's all done. Unfortunately I lost the sun before I could take pics. I did beat the rain though 

Everything is straight out of the box. Every part PCM showed in the instructions made it onto the plane, including the teeny tiny seat belt bracket. Since I'm not familiar with German WWII aircraft colors I painted everything right from the PCM call-outs. This was a tremendously fun build. Kit went together great. There's a few watch-outs I've come across since my last post so I'll highlight those in this final set of pics. I am working on a base for it so may add that in here later.

These 1st 2 are my favorite pics...

Since I usually do jets this was new. Tried some scratching along the wings with a piece of foam and some silver paint. Thought it would tone down under the dullcoat but it didn't. What do you guys think of it? 

The wheel shafts were about 2mm too long. I cut off 1mm and drilled out 1mm on the wheel so that they sat in tight to the gear leg. It shows up even better in the underside pic

I used Vallejo washes and AK powder to do all the weathering. 

There's no mount for the step. If I had seen this ahead of time I would have drilled 2 pilot holes before painting. Also mount the nose guns before gluing on the cowling in front of the windscreen...or the guns may fall into the fuselage, never to return. Fortunately mine didn't. I set them in place with canopy glue to make sure they didn't slide into it.

Thanks for tagging along with me. Till next time, model on!

I may be late to your  "Butcher Bird" build but, I'm certainly not too late to admire your work. Really sharp construction, painting and detailing. You are doing the Fw 190 justice for sure. Those Pacific Coast seem to be real beauties. I have their Macchi c205 Veltro and Fiat G.55 kits in my stash. I'm saving those 1/32 kits for a later time when my eyesight can no longer handle 1/72 and 1/48. PC turned out some really impeccable kits and are certainly worth building. Keep up the fantastic work.

Thanks Hoss. You're going to enjoy it for sure. 2nd weak point, which is highlighted in the CyberModeler build review is that the gear legs don't have a good attachment setup. I drilled a hole in the leg and inserted some brass rod. This at least gave me a solid post to place in the hole in the gear bay. The plastic post on the gear leg is really small and doesn't lock into the hole at all.

Now that the decals are on I'm not worried about moving the model around and breaking the gear so let's install it.

Looking great so far. Your work has inspired me to order this kit. It seems like this is the only FW 190A early version kit out there in 1/32. Looking forward to the finish. 

So I learned that the top crosses weren't right. Turns out I pulled the wrong mask off. 

Fixed it today! Here’s a during and after shot...

some touchup to do but overall very successful. Nothing that some weathering won’t hide ​​​​​​​

Lots more painting happening today. All the major parts are done. The markings are all airbrushed. Just the red 8 and squadron markings will be decals. 

The camo is freehanded To give a soft demarcation between colors

That Model Master paint must last forever. I truly wonder how old these are  they spray nice and that’s what matters. Later tonight I’ll dullcoat the whole thing and get ready for decaling.

Let's add some color!

Looks great so far. Looks like the wing and fuselage went together nicely. Also looks like the cowl panels are nice and tidy. Looking forward to paint!

Ok paint has started! This is a totally new experience for me. I picked up a ton of MM enamels at an estate sale recently for about 10 cents ea. This gave me all except RLM71 for this build and I need to keep the cost down. Already had enamel thinner so one of my club friends is giving me advice on how to paint with them. I’ve thinned this down to the consistency of milk. It sprayed pretty well i think given no details have been lost in the application  A little hard to see it given the satin primer but hopefully it’s good enough for you guys to see how it looks. Any advice or tips is highly appreciated...

I kinda held off on any updates till this round of dry fitting was thru. This set of shots shows the detail and fine engraved lines in the PCM kit.

first off the wing profile seemed to benefit from some support on the back half of the cord. This brought the profile up to match the fuselage and if you grab it by the wings won’t stress the glue joint in the future.

This is the wing with no weathering in the wells followed by some weathering. 

Could it benefit from a dark wash to tie it all together?

Under a satin black primer the thin panel lines seem to POP. Before primer it seemed you could hardly see them. Something tells me to really go easy on the coats of paint to keep these strong.

Fuselage is an easy assembly

Now the engine is nice, unfortunately it is almost completely hidden on this model behind the fan blades and props. For that reason it’s simple dry brushing and some grease stains.

So that brings this week’s session to a close. Off for a poker weekend with my buddies. Back again next week!

Moving right along  Today started with alignment of the fuselage halves. After reading a couple build logs I decided to glue in the cockpit before putting the fuselage together. Yes, it would go in afterward but the struggles i had getting it to fit made me wary, plus i figured I'd break something. Lord knows I've done that a couple times already on this build.

Here's what I learned. Always work 2 steps ahead on this one. With no alignment pins, by nature of being a multimedia resin kit, there's alot of alignment that impacts other parts. Sometimes it's not what it seems. For instance the glazing putty in the below pic. I was going to close that gap...and some of the cockpit fit work i did was to get it to close as the instructions show...BUT if it's closed the front upper cowling doesn't fit haha what a discovery. I was 2 steps ahead though so nothing lost here. 

check out that wing root. Very tight i think and it's only taped together in 1 spot. All the build logs said this was a problem. I think it has to do with multiple parts going together too soon if you follow the instructions to the letter.
Overall this is a well designed kit! It really looks sharp. Almost no cleanup on the fuselage seams. I just started from the tail and worked forward an inch at a time. Then i put a dark wash on it to check out the seam and fill anything remaining with CA. The more I can clean up before primer the smoother the paint is going to look.

Oh I'm in on this one of course!

Oooh, very nice. I'm watching this one.

BK

I almost got one of these on sale a while back but backed out cause of my large stash. Looks to be a great quality kit. Good job done on the pit.

Looks like a very interesting kit. I'm a huge FW-190 fan so I'll be following along. Thanks for sharing and looking forward to your updates.