Vintage Armor Kit GB - 5/1/08 - 12/31/08 WIP

Mark - good going...another oldie/goodie kit!

bufflehead - very nice job, love the tow cable! did you actually twist it yourself, or what is your source of cable? The Su85 im finishing, lets just say my SB cable did not twist too well :)

mmc wrote:

WOW what a fantastic build bufflehead, so clean. Look forward to seeing it with the schurzen and some paint. Haven't done any scratchbuilding yet, that's another thing to add to my "to do list".   Mark

Thanks Mark!  Scratchbuilding is not only fun, but there's a great sense of personal satisfaction knowing that you can actually make parts from bits & pieces of plastic, metal...whatever.  I found that the more you do it, the easier it becomes AND you don't get stressed if you lose or break a kit part....just make a new one from scratch!!  Give it a try!

JMart wrote:

Mark - good going...another oldie/goodie kit! bufflehead - very nice job, love the tow cable! did you actually twist it yourself, or what is your source of cable? The Su85 im finishing, lets just say my SB cable did not twist too well :)

Thanks JMart!  Yeah, I twisted the tow cable from 5 or 6 strands (I can't remember how much) of thin copper wire.  I tried silver wire, brass wire and even steel, but copper is the softest and easiest to twist...plus its much more pliable when done!  I found that the key is to make sure all the strands are TIGHT when twisting.  Loose strands just end up messing it all up!  I put all the strands of one end in a stationary vise, make sure all the strands are separate and then tighten the other ends in a handheld vise (I use a pin vise or an Exacto handle).  Then I make either a RH or LH twist (Germans used a LH twist, U.S. a RH twist, etc) keeping constant tension on the wires.  That's it.  It took me a few tries and I'm still not 100% statisfied with the results, but they look a whole lot better than the indistinct lump that was originally molded on the hull!!

BTW, the copper wire I used came from some small electrical wire I found in my junk box.  I just stripped off the jacket and had 10 strands to work with.  I'm guessing its 32 gauge...possibly smaller.  

Michael I agree with you that this group build was a good idea to get back to what modeling armor use to be. Mabye it is not the most populated or frequently posted GB but it is still a great idea. I have not posted much but I am about half done with my M13/40. Just no pics worth posting yet. it kind of forces you to go back to scratch building instead of these new hi-tech kits that leave little room for it. bufflehead's panzer is a great example of what can be done with these often overlooked kits. The BoB GB is tying me up right now waiting on decals that are taking forever to arrive! After that i plan on finishing up my build.

                                                                                  Soulcrusher

bufflehead - Very nice details, nice cable work. Just think a great model and no PH....no indy tracks. You embrace the true spirt of the old modeler. Can't wait to see it finished.

mmc - Waiting to see your next work of art

soulcrusher - No problem with the posting....sometimes small is better.

Rounds Complete!!

Hello all.

Went back to work this week so haven't had much time to post any updates.

Redleg12 thanks for the vote of confidence.

Well my 6 pounder is almost done, it's all painted and has recieved a little weathering. It's been a very nice kit, ideal for a novice ( like me!!! ). I've started to paint the 3 figures that come with the kit, not sure if I'm going to add them, as the moulding is very rough. Anyway here's the pics:

[/img]

[/img]

[/img] 

I'm quite pleased with how the kit has turned out, although I think the painting could be a bit better, think it might be time to invest in a airbrush!

Will post some pics with the figures once they are done.

Mark 

MMC - Pictures are a little dark so it is hard to tell on the pain, but looks good so far. Waiting to see with the figs.

As far as an AB...it will open a new world for you. If you are enjoying model building....it may be time....think of it this way....4 months until Christmas...makes a great gift!!

I'll keep an eye for your updates!

Rounds Complete!!

You're right about the pics redleg, think I'll try a few more along with the figures.

Mark 

bufflehead - thanks for the info!

Mark - yes, AB will be much better.. I got one when I got back into the hobby last year... at first, I just use it for priming and large surfaces as I learn more. Do some searches and research, many options out there... also, you have to figure out if you need (and can afford) a paint hood/fume hood. They can be pricey (on both sides of the pond!) but a must if you model indoors and you have little ones in the house...

cheers

mmc - your 6 pounder is looking pretty good!  Those photos COULD use a little more light as mentioned, but I can still make out the general details!   Yep, and an AB would make painting really nice!!  You mentioned figs, but are you going to put them all on a dio or base?

Phil_H wrote:

Hey there bufflehead. Great work on the ancient PzIII kit - and to think it had been destined for the spares/scrap box.

Tell me about it Phil!!  I didn't expect to be working on this kit and am delightfully surprised to find out that its not that bad a kit! 

So here it is, ready for paint!  I was sorely tempted to scratchbuild the schurzen, but decided to keep within the spirit of the GB and used the kit parts instead.  The turret schurzen was not altered, but the hull schurzen was waaay too thick so I thinned them by about 70%, so they could look more in-scale.  Now I have to figure out what paint scheme for the darn thing!

Hello everyone.

bufflehead: I am in awe, your Panzer III is amazing, I love the little scratch details, can't wait to see it all done, fantastic work.

I've finally finished the 6 Pounder and the figures that came with the kit. The moulding on them was terrible, after a couple of coats of Vallejo English Uniform the details became very hard to see. The date on the box says 1970,and looking at the results you can tell they are old.

I took a few more pics, with a bit more light, so here goes

[/img]

[/img]

[/img]

[/img]

[/img]

[/img]

bufflehead: I came across a photo of a 6 Pounder in France which gave me the idea for doing the 6 Pounder for this GB.

[/img]

I plan to make a dio along the lines of the photo.

Mark 

Just about ready for paint on mine after sanding and gluing 22 dolly wheels. 

I posted a question in the figures section and at this point I really want to replace the 1/48th scale figures.  They should be WWII British Infantrymen and if I can't get any in time I'll just leave them out of the build. 

They are just too plain looking and the mold likes are pretty thick.

mmc - I like what your doing with the 6 pounder and figures, that last B&W photo is great!  However in photo #6 there is a problem....the crew is pointing the 6 pounder between those two trees when they should be aiming for that Panzer Mark IV to the right!!  Well....that shadow between the trees and the fence LOOKS like a Pz IV!!   OK, I've got a vivid imagination......

Panther F - Dude I feel your pain with those roadwheels!  22 is a lot, but try a Pz IV (I like Pz IVs!!)....they've got 32!!  Wish I could help with the figs, but I know almost nothing about 1/48 scale kits.  Anyway, hope to see the results of your hard work soon!  I haven't seen a Churchill posted in quite a while.

To update my Tamiya Pz III....its already painted with camo. I want to get the markings on before posting photos.  Maybe tomorrow?

Nice work on the detail with the PIII bufflehead.    That is pretty slick work.  Yeah, I know all about the PIV road wheels, I'm building a Brummbar in another group build at ArmoramA.  Just got the primer on it and a base color coat on the Churchill last night. 

I think the real pain on those 22 wheels was they didn't line up, so I had to re-drill a straighter hole for all of them.    But hey, we're talking about 1966 here. 

Post some pics of that camo when you can.  Too bad it'll hide all the extra work you did.

bufflehead - you are doing the scrach builder a great justice. Nice job on the little details. Looks good in just ugly brown plastic....can't wait to see it painted.

mmc - love the little 6 lb gun. I love the outdoor pic and the research photo. Looks good with the figs. It has been great watching the two guns you have built.

panther - Hey in 1966 most of these were build and run on the carpet to destruction. There were no details or precision. What you are doing is proof that it is the modeler that makes the model look good not the quality of the kit.

Sorry to all I have not been here the past week. Off on buisness. Trying to catch up on everything in all the forums. But......I'MM BACK

Rounds Complete!!

Hello all.

redleg12: It's been a great experience for me to share my 2 little builds with everyone, I'd like to say a big thank you to everyone for making my first GB a pleasure to take part in. Can't wait till the Red Storm on the Reich GB is due to start.

bufflehead: You're right that shadow does look like a Panzer IV!! . I'll post some pics of the dio once I get round to doing it. Looking forward to seeing that III of your's.

G.A.modelmaker: Sorry to read about your mishap, such a p****r.

Looking forward to seeing all the other builds, thanks again, had great fun.

Mark 

bufflehead - I really like it so far, many great ideas for the schurzen tweaks.

mark - love the pics! The outdoor ones specially, really looks nice...  and kudos on the figures... I know they are hard to paint in a convicing manner, of course *I* never have a problem with figs... I bagged 'em and put in the spares box, no problem! ;)  One day I will attempt to paint figures...

Panther - that is why I always have more than one build on my bench! In case I have an off day, hour or 20 min and want to do SOMETHING on the work bench! Summer is the worst, high humidity, takes 2-3 days for ANYTHING to dry..paint, future, dullcote.... spray..wait 3 days...spray another thin coat...wait 3 days.. lol

Well, did nothing on the Vintage Armor Kit GB that is.  I did lay some paint down on another group build I'm in, but that only took a few minutes.  I did take a moment to think about what to use in the next GB, but then I decided that was too much to think about! 

I needed a day where I did almost nothing at all but some down time for me and my dogs.  Pretty hot out so we took a ride and just soaked up some A/C all day. 

Hey Panther F, I'm glad you're still posting here!  Yeah, watch those ancient decals...I tried to use some old Italeri decals recently and they practically disintegrated when I moved them into position!!   Hope to see some photos soon!

I've been steadily working on my Pz III, just haven't had the time to take photos.  Most of the decals are on; I have to make a tape stencil for one of the markings that I don't have a decal for.  I made some boo-boos  along the way, but its getting there.  I MIGHT finish it this weekend, but that's probably wishful thinking!

Know the feeling there bufflehead, something always seems to crop up.Looking forward to seeing your III.

Mark

Well guys, I managed to clean up the workdesk enough to snap a few quick photos of the Pz III.  Markings are finally done (I managed to screw them up a couple of times) and I toned down the gloss finish enough for photos. 

without the schurzen:

wheelie things ready for weathering:

Everything was going OK until......DISASTER STRUCK!!!!

I pinned the tracks to cardboard and took them outside to paint (used a lacquer based rattle can).  I left them in direct sun hoping the heat would soften the tracks and straighten out a little.  Stupid me forgot about them for a couple of hours and when I checked, the wind had blown them under a tree, where they had ripped apart!!    Fortunately, I think I can staple the broken pieces together and still use them...the schurzen will hide most of the track anyway!!  I'm so glad I decided to use the schurzen!!  Anyway I just need to give it some pin washes and final weathering and fix those tracks and she's done!

Wow!!!!!

I love it, I want one, fantastic paint job, been well worth the wait. What a p****r about the track, hope you can save them.

The details are amazing, I'm in awe, superb build bufflehead.

Mark

Hey Bufflehead,

That looks great with the paint on. Nice camo work.

Another alternative you may consider for repairing the tracks is "invisible" sewing thread. It's thin clear (well sort of) nylon thread which blends in with the background.

I know there isn't a lot of activity in this GB, but for what's its worth I have a complete build to submit.  I'm surprised because I actually finished a build way before the end date of the GB!!    

So here it is:  Tamiya's VENERABLE (1971) Panzer III Ausf. M/N built as a long barreled M.  The markings represent the command vehicle of Oberst Hermann von Oppeln-Bronikowski during the Battle of Kursk, July 1943.  I was inspired by this color plate in "The Panzerkampfwagen III at War".

Since this GB is for vintage armor kits, I figured go for that "vintage" look on the build....the look I aspired to when I was a teen back in the 70s when my modeling heroes were Shep Paine and Francois Verlinden.  So I held back with the weathering - no chipping, scratching, pastels, pigments, dot-filtering, color modulation, etc...you know - all the newer techniques of armor weathering.  I decided to stick with just the basics.  Basecoat and camo done with Tamiya acrylics, a couple of applications of oil washes, some postshading  and dusting with more Tamiya acrylics and finally some basic drybrushing.  I know there are many who think this type of finish is not accurate, not dirty enough, but what the hey...its my tank and I'll finish it how I want!

Anyway, I really like how it turned out.  This is probably closer to the "vintage" look than anything I've ever done, recently and looong before.  Its amazing how a decent paint job can turn an "old timer" like this into something worth displaying!  I hope you like it!

BTW I fixed those broken vinyl tracks with staples and they worked pretty good!  Don't know why but the tracks shrank quite a bit after painting!  I could barely get them on...before painting they were a little loose.   You can see how much they're stretching at the sprocket.  Also I added little strips of clear plastic tinted light green to represent the armored glass in the cupola view slits.  You can see a little bit of one in photo #5