1/35 TACP Stryker and 1/72 ICV Stryker with slat armor.

Alright update time. I will start off with the 72nd Stryker first. Non-skid is finished, PE antenna bases in place, drivers hatch and winch cover is finished. The drivers hatch only lacks weathering and a wash, I still also have to install the reflective viewing ports.

Next up 35th build. Started applying non-skid surface (by hand), rebuilt tool rack and HF coupler rack, and last but not least gave the underside a coat of future to darken things up a little.

Thanks you all for looking and PLEASE FEEL FREE TO GIVE ME YOUR FEEDBACK, COMMENTS, CORRECTIONS , AND CONCERNS.

Dave Fassett

Thank you gentlemen. Waynec, on the tires I just cleaned them well with warm water and Dawn. After they had air dried I applied several coats of Tamiya weathering powder until I achieved the desired effect. I have also used pastels in the past with good effect.

Dave Fassett  

tires look great. what is your technique?

Congratulations on your graduation and degrees!! Can't wait to see some updates on your work!

Well after many weeks I AM BACK . For the last three years model building has been taking a back seat accept on school breaks and holidays. This was a must when you are a full-time student, father, husband, and employee. Well no more, on Friday, 10 May, I graduated with dual degrees. So with this milestone behind me, my time is now wide open for building. I hope to post some photos here within the week.

Dave Fassett

Thank you everyone for the great feedback. Ok,its been a couple of weeks since my last update, so I figured I would post some more progress. Work, family, and working on my duel degrees have left me with little time the last couple of weeks, but I did manage to get some building in. I was able to finish, paint, and weather the suspension area of the TACP Stryker. To me the color looks a lot better after the washes where applied (pictured), and darkened up some when I coated it with Future (not pictured). The pinner compartment in the third photo in just set in place for now, I will attach it after the upper and lower hulls are glued together. I was also able to get the tires weathered and ready for the wheel, which is next on my agenda. As for the 72nd Stryker, I started removing the detail on the right side and adding non-skid to the upper surface. My goal this week and over spring break is to catch up on the small Strker and start on the top side of the 35th Stryker. More pictures to come in the next week or so. PLEASE FEEL FREE TO GIVE ME YOUR FEEDBACK, COMMENTS, CORRECTIONS , AND CONCERNS. Again armor is not my strong point so any help will be much appreciated. Thanks for looking and have a great day.

Dave Fassett

They look great!!

Dave,

They look like they've seen a lot of dusty miles to me, v2 looks the part!

OK, take two.  After looking at several pictures of Strykers in the time frame I am depicting, and listening to several armor guys, I decided I needed to redo the weathering. So here we go, what do y'all think? Do we have a winner?

Dave Fassett

Morning to all.  I need y'all (as we say here in Texas) to give me some honest feedback. I was able to get the tires/wheels together and weathered on the 1/72 Stryker. This is where I need your feedback, do you think the weathering is just right, not enough, or to much. The 72nd build is going to portray an in theater (Iraq) vehicle during the summer months (which is very dry, and HOT). So give me what you got, thanks in advance.

Dave Fassett

I don't know a thing about this vehicle, but I do know your pe work looks really nice and clean! I agree that after a filter and wash the bottom will look much less stark.

Well here is a small update. Work, family, and me working on my degree's have left me little time this week to work on my Stykers. I did manage to get some paint laid down on the under side of the 1/35 kit. I have yet to add the filter, wash, and mud so it looks a little "bright" to me, what do you all think, any recommendations? I think that the filter and wash will tone down the color and add some depth.

Now for the 1/72 kit. Work continues applying PE to the left side and rear troop door. All of the left side molded on detail has been removed and holes filled. The upper armor mounting bracket was finished and installed along with some of the slat armor bracing plates. A grab handle and door latch handle were added to the rear troop door.

I have started work on the lower armor mounting bracket and the assembly, painting, and weathering of the wheels and tires for the 72nd kit. I am still working on the lower suspension for the 35th kit. I should have this all done and primed by this weekend. I will try and post some more pictures this weekend, time permitting. PLEASE FEEL FREE TO GIVE ME YOUR FEEDBACK, COMMENTS, CORRECTIONS , AND CONCERNS. Again armor is not my strong point so any help will be much appreciated. Thanks for looking and have a great day.

Dave Fassett

waiting for more!

Very cool looking project!

looks good so far,looking forward to your build