SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Stuart V, Normandy - completed photos

6918 views
27 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2006
  • From: ON, Canada
Stuart V, Normandy - completed photos
Posted by jgeratic on Wednesday, September 24, 2014 5:39 PM

kit:                    AFV Club 1/35 M3A3 (Stuart V)
AM parts:        Royal Model PE #342
                         Bronco T-16 workable track links
crew figure:    Ultracast conversion
decals:           Archer and home made/printed
grass:             Gaugemaster


Historical background: 

Juno Beach sector, around the vicinity of Secqueville-en-Bessin, June 8th 1944.
Morning found the Canadian Scottish infantry under heavy flank fire from German snipers.  The 6th Canadian Armoured Regiment, also known as the First Hussars, were on hand in the infantry support role.  A Lieutenant W.E.P. Smith was given the task to head out in his Stuart to recon the area.  In a buttoned down tank, it was difficult to spot the enemy, so the lieutenant threw open his turret hatch for a better view.  

With his upper body fully exposed, he was instantly hit by a sniper round in the arm, followed seconds later by another hitting the side of his helmet.  Luckily, that one deflected upwards and out the top, causing no injury.  His crew quickly rushed their wounded commander back to HQ.  On arrival, he refused medical aid until he could fully relay the sniper positions he had observed just before being shot.   For this act of bravery, plus several others during the advance inland, Smith was awarded the Military Cross.

Subsequently, two more Stuart recon tanks were sent to the area Smith had last been.  There, they helped the Canadian Scottish unit to ferret out the Germans.  More than thirty snipers were either killed or captured.  The result was a welcomed respite in the rear area.

 

 

 

regards,

Jack

  • Member since
    November 2004
  • From: Cat Central, NC
Posted by Bronto on Wednesday, September 24, 2014 6:39 PM

Very nice.

  • Member since
    July 2006
  • From: Philippines
Posted by constructor on Wednesday, September 24, 2014 6:59 PM

Very good looking model indeed!

  • Member since
    January 2006
  • From: Pineapple Country, Queensland, Australia
Posted by Wirraway on Wednesday, September 24, 2014 8:01 PM

Very nice.  Figure turned out great !

"Growing old is inevitable; growing up is optional"

" A hobby should pass the time - not fill it"  -Norman Bates

 

GIF animations generator gifup.com

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in North Carolina.
Posted by disastermaster on Thursday, September 25, 2014 4:54 AM

http://www.freesmileys.org/emoticons/emoticon-looney-toons-007.gif Ehhhh, really great work there doc.

That first pic had me wondering if it was a model or

      a picture of the real thing.

               Excellent in all aspects.

Sherman-Jumbo-1945

"I was so much older then, I'm younger than that now"

 

 
  • Member since
    January 2013
Posted by jibber on Thursday, September 25, 2014 8:16 AM

Jack thats a really nice looking Stuart. You did a fantastic job on everything from weathering to the matted grass in the track pads and I'm blown away with the figure. The washes are perfect and the lower hull looks great. How did you ever keep from breaking his chinstrap?? Cool photo BTW.  

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Thursday, September 25, 2014 10:45 AM

Bronto, constructor, Wirraway, disastermaster, and jibber - thanks very much guys!

The chinstrap is a piece of sheet plastic I cut to size.  I used a repalcement head from Hornet, and it originally  had the paratrooper style strap that is Y shaped at the ears.

The first sculpt is the one used from this five piece set:

regards,

Jack

  • Member since
    June 2006
  • From: Michigan
Posted by ps1scw on Thursday, September 25, 2014 12:47 PM

Wow!

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, September 25, 2014 12:48 PM

Lovely looking build jack, great work as always.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Thursday, September 25, 2014 11:52 PM

ps1scw and Bish - thanks kindly!

regards,

Jack

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Friday, September 26, 2014 6:45 AM

Excellent model and presentation. Toast  Where did you get the grass from? Is it available here in the States? The first picture looks like the real thing.  

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    January 2014
  • From: Toronto
Posted by Rob S. on Friday, September 26, 2014 7:17 AM

Just plain and simply incredible. My fav tank subject too!!

______________________________________________________________________________

 

On the Bench: Nothing on the go ATM

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Friday, September 26, 2014 11:34 AM

plasticjunkie and Rob - thank you gents!

The grass mat I used is Gaugemaster brand, a UK based railroad hobby shop.  The fibers are about 12mm in height.  The area underneath the Stuart's tracks was trimmed and removed so the vehicle sits flat on the wood base below.

I'm sure you can find similar products in the States at railroad hobby stores.

regards,

Jack

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Sunday, September 28, 2014 2:56 PM

Now that's an impressive finish when you have to ask yourself in that first pic if it's the model or a real vehicle. Very nice work on this one Jack! Yes

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Monday, September 29, 2014 10:59 AM

hi Bill - thanks! 

regards,

Jack

  • Member since
    June 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, October 5, 2014 8:31 PM

Wow - that is one awesome model and one amazing story!

4badges

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Sunday, October 5, 2014 11:26 PM

Thanks rocker!

regards,

Jack

  • Member since
    May 2014
Posted by Sackgasse on Monday, October 6, 2014 1:47 PM

Hi Mr. Jack.

This is a stunning build!

Personally I find it difficult when figurines are included and especially when they are depicted in pain and anxiety.

It is a tricky one that never will pay justice.

But you have put this into a historical perspective and your diormam all makes sense.

So thanks!

Zack

Happy Modeling! Cool

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Monday, October 6, 2014 7:11 PM

Wow Jack.  I thought the 1st pic was going to be the reference photo.  Amazing. I can't remember the last post I made in the armor forum but I had to compliment you on that fine piece of work.

Marc  

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Tuesday, October 7, 2014 12:27 AM

Sackgasse - thank you!

Was lucky to find a replacement Hornet head to depict the situation.  The arm nursing the wound though had to be scratch built.  

------------------------------------------

hi Marc,  thanks for that, much appreciated.  Maybe the first photo will be found useful as  reference by others?   

regards,

Jack

  • Member since
    December 2002
  • From: NYC, USA
Posted by waikong on Tuesday, October 7, 2014 2:00 PM

Fantastic looking build!  The grass is amazing too.

My website: http://waihobbies.wkhc.net

   

  • Member since
    December 2012
Posted by RX7850 on Saturday, October 11, 2014 8:07 PM

Very Very well done.

  • Member since
    April 2004
  • From: The cornfields of Ohio
Posted by crockett on Thursday, October 16, 2014 12:32 PM

That is a great little Dio.....I would like to see some sod up in the tracks since the vehicle appears to be traversing a grass field. Other than that little quirk, I really like it. I love the effects using layers of OD in different shades, something that I like to do myself. It really adds texture and feel to the piece. Outstanding work there.

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Thursday, October 16, 2014 11:53 PM

waikong, RX7850 and  crockett - thanks! Beer

Yes, tufts of grass was referenced to some current photos of still running Stuarts.  Maybe ground conditions are key, maybe not, but wasn't certain if rubber track pads severely cut the ground up.   Decided to leave the effect low key so as not to draw attention, but this time the opposite has happened - lmao!

regards,

Jack



  • Member since
    January 2007
Posted by the doog on Friday, October 17, 2014 8:45 AM

Just gorgeous. Seriously a beautiful model and presentation.

If I may offer: the only thing I would recommend is to ad some varied vegetation to that base. A few flowers or weeds in that lawn would give it a little more realistic appearance. Also, when you do tracks in grass, just press the grass down--the tracks wouldn't necessarily obliterate the grass behind it like that. Not a criticism, just a suggestion. :)

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Friday, October 17, 2014 9:52 AM

hello Karl, thanks for that and those keen observations. Yes

That's what I figured, the long grass would mostly be trampled down.  The fibers were so stiff that the model sat on top, which is why I had cut out the track portions.  I did re-introduce some grass, placing them one at a time behind the vehicle, but I agree, not enough.

Could I just paint some particle material and sprinkle on top, or is there a specific landscape material you can link that would suggest yellow flowers  as in the photo below?  It is googled from the actual area as seen today.

regards,

Jack

  • Member since
    February 2013
  • From: Wichita, Kansas, USA
Posted by Recon89 on Friday, November 14, 2014 9:12 AM

Jack, what did you use for the grass? I'm always looking for diorama ideas.

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Friday, November 14, 2014 9:34 AM

Hi Recon89,

The grass is a mat, just like a carpet.  The fibers are 12mm in height, and is also available in 6mm.   Colour style I had chosen is spring meadow, but also comes in summer and fall shades.  I did find the colour a bit strong, so sprayed a light mist of grey over top.

I ordered from the UK railroad hobby shop Gaugemaster:

  http://www.gaugemaster.com/search_results.asp,

but as mentioned before, you should be able to find something similar on this side of the pond.

regards,

Jack

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.