First Tank Kit in queue, looking for advice- Tiger 1

This will help you:

missing-lynx.com/.../pftiger.htm

Since you version has the cast cupola which was introduced after Zimmerit was introduced, you should add zimmerit.

Here is an article that might offer more tweaks for you too:

http://www.missing-lynx.com/articles/german/mmtiger/mmtiger.htm

But to be frank, if it's your first tank model -- just build it out of the box and have fun with it.  Save your super accuracy builidng energy and skills for a better base kit (this one is pretty mediocre in many ways).

thanks Roy, appreciate the input!

Adding the zim seems like a great chance to learn a new technique (which I strive for in every build).

If you want complete accuracy, then yes it should have Zimm. But I would echo Roy in its not something I would worry to much about for my first armour build. I would just get to grips with the basis, sort of walk before you can run. But if you really want to add the zimm, then go for it. What are you thinking of using.

I've read a lot of different techniques from putty to a heated screw driver.

I just got a 3doodler and one of tips is super fine, I may try literally drawing the zim on.

Not sure yet.

Still have 2.5 builds ahead of it but I like to plan an research way ahead of time.

It was either this kit or my Gepard with individual tracks and all the PE, thought I'd start simple.

Traditionally I build aircraft, not a beginner by any means.

Need to finish this guy off first:

Wow! Okay yeah, priorities understood.  :)

I have to echo the other guys though. Going for absolute accuracy is not something any of us will suggest for your first armor build.

Trying new techniques such as modulation, oil streaking, and rust and dirt effects would be more practical.

Enjoying the build would be my suggested top priority. Accuracy for accuracy's sake will bog you down.

thanks guys, I see your point.

I'll shoot for a good solid build with the adaptation of some new technique.

I'll post here when I start it, you guys are all super talented.

May I suggest you not try the hotknife option?  They pass muster at a distance -- but if you look closely, they don't resemble real zimmerit.  It was applied and raked with a toothed trowel or stamped with a studded plate.  That's why zimm applicators are either teethed tools or roller wheels.  My two cents.

People forget all the time: puzzelates me.

Practice on crap, whoops I mean scrap.

My few tries at that involved putting down a thin layer of putty like Testors white or Squadron green. Use the square back end of a #11 blade and go up-up-up, then flat-flat-flat. Over and over.

.

Excellent advice guys, Im so happy I posted this here.

I chose that Dora scheme 'cause its colorful AND my first go at airbrushing.

more color!

https://farm9.staticflickr.com/8700/16412942783_4b9d35acac_b.jpg

Shawn: growing up I built a/c and afvs.  I got back into serious modeling after college, focusing solely on 1/72 Luftwaffe a/c.  It honed my eye for detail and allowed me to appreciate the lines, curves and shapes of the aircraft assemblies, the attention to decal work and fine camo airbrushing.  I jumped back into AFVs in 1995 and have migrated those skills over.  The big thing in developing an "eye" in AFVs is to always remember that the vehicle is an actual machine -- being operated by humans.  Often we can lose perspective b/c it's a few ounces of plastic on our workbench.  But if we try to get to eye level and with the mindset of "would I store this item here or there if I were the crewman?" -- it solves lots of problems.  

Great looking Dora!

Thanks Roy!

There are a lot of great skills to learn in the armor world that I can translate to my usual subject material.

Dora is done, I will post pics in the aircraft section once I do a glamor shoot with 'her

May I suggest that if you do wish to go the Zimmermit way to get the Tamiya Zimm tool. It does make it easier to apply.

thanks Mech tech, it looks like the "easier" way to go

It's also possible that Eduard (or similar) makes a P.E. set for the zimmerit.

My opinion is that 1/35 PE zimmerit looks poor.  In 1/48 and 1/72, you can't see the seam imperfections.  They're way too obvious in 1/35.  And my gosh, don't ever look at some company's attempt to have you put a PE zimm part over a curved kit piece -- I got a 1/48 PE set for the Tamiya Panther G and the manufacturer has this star shaped piece you're supposed to place OVER the kugelblende glacis MG port -- ridiculous.

yeah, PE zim' sounds like a nightmare!

I've seen resin Zim' kits that seem a little more user friendly.

Honestly, I don't think it's so hard to do. Depends where you want to set the bar, but try doing it with putty and a tool. There are modelers around here that will always be beyond what most of us can achieve, but you can get good results with a little practice.

Where it really comes into its own, as Roy says, is when you get into some tight spots and have to come up with some creative solutions. Try practicing on the inside of your hull, or on some sheet scrap.

And as always, wherever possible work from photos.

.

Hi Shawn M.

I think you have exactly the right kit to try a new technique.

I would leave most (all) doors shut, and save the interior parts to enhance Dragon or AFV releases.

And try putting my own zim using good quality pictures as reference.

Will dig out a few when back at home.

I did this with the same kit but not very successfully, it was worth the effort from a learning perspective though.

ATAK has very good resin sheets but I would save those for the Dragon and AFV releases.

Vey Best Regards

Johan

Thanks gang, I will try a few techniques on some spare parts I've got about in the extra's bin, see if I can make it look right.

With a very few exceptions I dont build the same subject twice so this'll be my one go at a Tiger.