Weather tracks

Looks like traces of paint on the side of the rubber on the road wheels as well.

Also, if you look closely at the metal parts of the edges of the tracks, including the end connectors, you'll see tan spray paint overspray from when the tanks were repainted.

I tend to use a brown or burnt umber color for the track base coat. I'll weather the track pads as I would other rubber items and the metal parts accordingly.

Thanks Gino, learn somthing new every day.

Rob Gronovius

I'd virtually avoid any silver on tracks except maybe the flat sides of the center guide teeth. The tracks, as noted, are black rubber and when new there is a sticky tar like coating on the metal parts. This usually gives away to a brownish, almost rust colored metal tint. Think of a manhole cover when you walk by on the street. Rust colored, but not really rusty.

 

Rob, are those rubber blocks on the inside of those tracks.

Thanks Doog and Rob great info picture great to

Rob Gronovius

I'd virtually avoid any silver on tracks except maybe the flat sides of the center guide teeth. The tracks, as noted, are black rubber and when new there is a sticky tar like coating on the metal parts. This usually gives away to a brownish, almost rust colored metal tint. Think of a manhole cover when you walk by on the street. Rust colored, but not really rusty.

 

Best way you can replicate this is:

1. Paint the tracks brown overall.

2. Light wash of Raw Umber oil.

3. Drybrush with Dark Gray or Metallic Gray

4. Paint the rubber parts the appropriate shade.

5 Lightly drybrush the rubber pads with same dirt color or light tan.

That's what I would do.

I'd virtually avoid any silver on tracks except maybe the flat sides of the center guide teeth. The tracks, as noted, are black rubber and when new there is a sticky tar like coating on the metal parts. This usually gives away to a brownish, almost rust colored metal tint. Think of a manhole cover when you walk by on the street. Rust colored, but not really rusty.

Unless you want to show a vehicle thats been sat around for a while, ditch the rust.

Paint XF-69 then dry brush some steel, you might have to use Tamiya silver if you want to stick to that brand, but i find it does not dry brush well. Not sure about the next step with what you have, not familiar with those. But i would follow that with a raw umber wash, oils are my preffered product.

The tracks on an Abrams consist of steel links with rubber pads. I would paint them first with XF-85 for the rubber then paint the areas around the pads with a 70:25:5 mix of XF-68, XF-69, X-7 for the rusty steel.

Hope this helps.