SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Micro-review ICM Lynx and a question-

621 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Friday, August 29, 2003 8:06 PM
My ICM Lynx came covered in a real thick grease as well. I used a cleaner called Simple Green, found in the auto department of Wal-Marts, etc., to clean off the grease using an old toothbrush (or a new one could be used, it is found in the health and beauty aids).

I bought the Jaguar detail set for the kit. Real nice set that includes clear resin periscope vision blocks. #63842 runs for $15.
  • Member since
    May 2003
  • From: The flat lands of the Southeast
Posted by styrene on Friday, August 29, 2003 7:41 PM
Has to be an excess of mold release agent. Try soap and warm water and a toothbrush (not the one you use on your teeth!). If that fails, go to an enamel thinner such as mineral spirits. Don't use acetone or you'll craze the plastic.

I have the ICM Soviet BS-3 field gun. The parts fit is excellent and the detail is superb but delicate. So far, it's building into a great kit. I've had to correct a few small molding errors, but for the price and subject, you can't beat it.
Gip Winecoff

1882: "God is dead"--F. Nietzsche

1900: "Nietzsche is dead"--God

  • Member since
    November 2005
Micro-review ICM Lynx and a question-
Posted by Anonymous on Friday, August 29, 2003 2:42 PM
I've only recently gotten back into the hobby and the local hobby store seems to stock some very odd kit makers. Unfortunately they are not totally forthcoming about the quality.

I built a Heller "Mir" which was fine, but light on details, I purchased an STC Start ISS which was total junk, completely non-buildable.

Working on a DML (dragon) Stug III with which I am not very impressed by the fit or the instructions.

I did see at another hobby shop the ICM Lynx (ICM seems to be from the Ukraine) and it was a mere $22. I have always harboured a fond spot for the Lynx tank and wanted to build one. On eBay I found the same kit for $5, so here it was.

The kit arrived the other day and I carefully looked over the quality.

First thing that hits you is the colour of the plastic, it's Pumpkin Orange!!

The details of the parts is *exceptional*, far better (IMO) than the DML kit. No flash, no warppage and the parts appear to be lightly held on the sprues, so cleanup and removal will be a snap.

The instructions are in both russian and english, and not in engrish, so that's a plus in my book.

The instructions about placement also appear to be exacting (again, unlike the DML kit) and overall I look forward to building this.

One odd thing (or perhaps not so odd, considering the place of origin of the kit) the parts appear to be covered in Cosmoline...anyone know how to get this gunk off?

Cheers!
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.