SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Can you tint primer by adding enamels to it?

766 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2007
Can you tint primer by adding enamels to it?
Posted by the doog on Sunday, May 18, 2008 4:25 PM

Hey guys--just a quick second question--has anyone ever tried to tint white primer (I'm using "Boyd's White enamel Primer")--by adding a flat enamel to it?

Especially on future "Yellow" paint jobs, I was thinking that if you could get a yellowish tint to it, you might actually have an easier time getting coverage.

Anyone have any reason to think it couldn't be done?! Or shouldn't?

  • Member since
    January 2005
  • From: Portland, Oregon
Posted by fantacmet on Sunday, May 18, 2008 6:07 PM
The only problem that is, aren't most of the Boyds colors now acrylics?  As long as you are using other testors paints of the same type(acrylic or enamal whichever the case may be), then you can mix em.  The Boyds white primer is nice in color but does have some pretty terrible coverage.  This may sound counter productive since it's from a spraycan but try Tamiya's spraycan primer, it's a synthetic laquer and covers GREAT.

    

  • Member since
    January 2007
Posted by the doog on Sunday, May 18, 2008 6:48 PM

I chhecked the Boyd's--it's enamel alright. WOuldn't there be some kind of compatibility issues with the Tamiya primer under the enamels? I do have some of that here now.

"Panel line separation"--yup, that monster already crashed my party! Evil [}:)] I seem to have banished it suffidiently however! 

For NOW!......Alien [alien]....BWAH HA HA HA!!!!! Laugh [(-D]

  • Member since
    May 2005
  • From: Left forever
Posted by Bgrigg on Sunday, May 18, 2008 6:55 PM
Actually a good way to get good coverage with yellow or white paint jobs is to use a silver base. Try the Tamiya AS-12 "Aircraft" silver as a primer coat.

So long folks!

  • Member since
    January 2005
  • From: Portland, Oregon
Posted by fantacmet on Sunday, May 18, 2008 7:01 PM
Yup Bgrig is right, it helps alot.  It's not that you get better coverage so much as it is not noticeable, because it reflects and diffuses the light after it passes through the thin yellow.  Since Tamiya is a Synthetic laquer there shouldbe no paint issues at all.  On my hi-lux I used Tamiya primer, then testors flat black then house of kolor color shifting paint, and then testors clear gloss.  I've also tested the testors black over the clear Tamiya stuff.  Just let the Tamiya cure for about 36 hours before chancing to the testors you'll be fine.  Tamiya cures FAST!

    

  • Member since
    January 2007
Posted by the doog on Sunday, May 18, 2008 7:13 PM

That's some great info there guys; thanks a lot for the help. I will do some experimenting before the next build with some silver stuff and also that Tamiya stuff and see what works best for me.

Thanks!!!! 

  • Member since
    January 2006
  • From: Sarasota, FL
Posted by RedCorvette on Tuesday, May 20, 2008 6:31 AM

I've tried using silver as a base under white but then had some problems with masking tape pulling up the top coat.

FWIW, my Millenium Yellow Corvette has a white primer coat, color coats, and tinted gloss coat, which is how I'm painting my model of it.

Mark

FSM Charter Subscriber

  • Member since
    January 2005
  • From: Portland, Oregon
Posted by fantacmet on Thursday, May 29, 2008 4:39 PM
Depends on the silver you use.  Try the plain jane testors silver from the spraycan.  Alo notice how super smooth and glossy your other paint goes down over that stuff.  LOL.

    

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.