SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Howdy howdy howdy - its Woody!

2253 views
28 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2011
  • From: Honolulu, Hawaii
Howdy howdy howdy - its Woody!
Posted by Real G on Tuesday, May 19, 2020 1:03 PM

Hey all,

Woody is back on the bench.  I have a short attention span so I'm easily distracted.  Actually, I was looking over the kit and noticed something you don't see in a modern Bandai kit - a molding flaw!

It might be that the ejector pin mark on the inside of the hat had something to do with it, and combined with the weird slightly flexible styrene Bandai is now using, may have resulted in the hole and tear.

I'm not going to paint the kit (GASP), so I needed to patch the hole to match the surrounding plastic.  I used the colored sprue that the hat was molded from.

I'll need to flatten the patch a little more, then gently buff out the area.  The entire model will be flat coated afterwards.

I also wanted to improve Woody's eyes.  Bandai provides stickers for his irises, but the surface they are to mount on are slightly domed.  How those brilliant product development people over there can figure out how a stiff, flat sticker would conform to a compound curved surface is beyond me.  Anyway, I had the thought to trim down the domed inserts flat, apply the stickers, then flood the depression with CA glue.  ("There's CA glue in mah eye!!!")  It worked a treat.

I hope everyone did not have fever this Saturday night.  Stay alive.

Ahem.  I'll git mah coat...

 

“Ya ya ya, unicorn papoi!”

  • Member since
    December 2018
Posted by Ted4321 on Tuesday, May 19, 2020 1:19 PM

I like it G. 

There was a mold line on the mt-m6 i built by bandai. It was on a small hidden part so really not a big deal. Flaws are rare though in my experience. 

Does the woody model have different mouths?  Or different faces or heads or something to get the different expressions? 

T e d

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Tuesday, May 19, 2020 1:33 PM

Ted,

Yes, Woody has three interchangeable faces.  The eyes are hard to adjust from the outside, and they tend to either stick or go floppy.  I need to figure out a fix for that.

“Ya ya ya, unicorn papoi!”

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, May 19, 2020 2:16 PM

I'd have made it into a bullet hole.  Or stuck an arrow in it.  After all, he is a cowboy!  The way you have him posed in that first picture, it looks like he's staring in disbelief at a bullet hole in his hat.

 

The bigger the government, the smaller the citizen.

 

 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Tuesday, May 19, 2020 2:52 PM

Nice fix.  He could say "there's a hole in my hat" along with "there's a snake in my boot"

Thanks,

John

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Tuesday, May 19, 2020 3:18 PM

Something that took me a long time to notice was that Woody’s holster is empty!  Maybe it was a conscious design decision by Pixar in the interest of kid friendliness.

In any case, he is not equipped to deal with bandits, injuns or rattlesnakes.

That’s why he has backup.

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Tuesday, May 19, 2020 5:39 PM

And just in case...

Nobody messes with the law in this town.

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2013
  • From: From the Mit, but live in Mason, O high ho
Posted by hogfanfs on Tuesday, May 19, 2020 6:16 PM

G,

I don't like it, looks too much like a toy...

 

 

 

LOL! Ha, outstanding job on patching that hole!

 Bruce

 

 On the bench:  1/48 Eduard MiG-21MF

                        1/35 Takom Merkava Mk.I

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Tuesday, May 19, 2020 6:49 PM

hogfanfs

G,

I don't like it, looks too much like a toy...

Well, there’s a story behind that...

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Tuesday, May 19, 2020 7:38 PM

Real G

I hope everyone did not have fever this Saturday night.  Stay alive.

 

Three thumbs up for clever! YesYesYes

But I fear that stupid song will be looping in my head for a day or two now. Crying

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, May 19, 2020 7:57 PM

Real G

And just in case...

Nobody messes with the law in this town.

 

'OH NOOS WOODIE GOT THE PIAT!!! WE'RE ALL DOOMED!!! '

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Wednesday, May 20, 2020 12:59 AM

“Rrreach fer the sky pardner, cause I’m a packin, and I ain’t afraid ta use it!!!”

Now where’s that no-good lazy space toy?

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Wednesday, May 20, 2020 1:09 AM

Greg,

I apologize for sending you back to the Disco Inferno.  I myself was almost a little too young to disco, but old enough to remember that silly era.

But who am I to criticize, as I spent my youth on equally silly designer jeans and Members Only jackets.

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Wednesday, May 20, 2020 6:52 AM

Real G

Greg,

I apologize for sending you back to the Disco Inferno.  I myself was almost a little too young to disco, but old enough to remember that silly era.

But who am I to criticize, as I spent my youth on equally silly designer jeans and Members Only jackets.

 

To be honest, I sort of liked disco. It was catchy. And unlike rap and hip-hop, it had the common decency to ride into the horizon when it's time was over.

Oh, and I miss my Member's Only jacket, odd you'd mention that.

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Wednesday, May 20, 2020 7:47 AM

Oho! I bet a LEGO pistol would fit his holster just fine!

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Wednesday, May 20, 2020 7:49 AM

Disco?

        Dya mean like the Disco-Volante in the James Bond movie? Oh! Yer talkin about the Music. And those ubiquitus ceiling Mirror Balls. Darned things gave me a headache. Interesting era that was!

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Wednesday, May 20, 2020 11:46 AM

https://m.youtube.com/watch?v=s5mGNRgKFOI

“Disco is NOT dead!  Disco is LIFE!”

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Wednesday, May 20, 2020 5:42 PM

Woody can now keep an eye on things.

The eye has to be polished for that creepy, lifelike feel.  Watch out Syd, the toys are watching.  Alllllways watching.

“Ya ya ya, unicorn papoi!”

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, May 21, 2020 8:25 AM

Lol, Woody needs an eye-patch until you get the other eye repaired... 

Snake 'Woody' Plissken in 'Escape From the Toy Box' 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Thursday, May 21, 2020 8:31 AM

Eye looks good!

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Thursday, May 21, 2020 12:48 PM

Greg - Certainly not FINEscale modeling; more like FUNscale modeling!  I need more fun versus fine in my life.

Gamera - OK you troublemaker, now I gotta make an eye patch!

The CA glue set weird in the other eye and as a result I have to find another way to infill the irises.  Maybe I used a cheapo knockoff CA brand.  Zap-A-Gap never shrank and collapsed on me.

 

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Tuesday, May 26, 2020 1:32 PM

Now the sheriff can keep BOTH eyes on the bad guys!

They are a nice improvement, I think.

The second eye got filled in with that UV curing resin kit from those "As Seen on TV" ads, since I was having severe problems with slow curing CA that developed strange crinkles and bubbles that collapsed.  I ruined a pair of eyes that way.  The UV resin works a treat, sands easily, and really does cure in seconds.  A cousin of mine is a dentist, and he gave me a professional grade UV light used in dental work, which has more UV "horsepower".  I'll try it out on all the rest of the eyes.

“Ya ya ya, unicorn papoi!”

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, May 27, 2020 11:29 AM

That's a BIG improvement!!! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    February 2015
Posted by InternationalRescue on Thursday, June 4, 2020 6:03 PM

Great job and fix!  Do you have Buzz?  

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Thursday, June 4, 2020 6:17 PM

InternationalRescue

Great job and fix!  Do you have Buzz?  

 

I sure do!  He'll come in to help with the space/sci-fi builds.  Coincidentally, I was looking over Buzz's parts last night to see what needed doing.  An LED laser will NOT be fitted, as the arm is too small to accomodate a battery.  He will get the "starry eyes" modification though.

“Ya ya ya, unicorn papoi!”

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Thursday, June 4, 2020 9:20 PM

Favorite thread.  :)

Thanks,

John

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Friday, June 5, 2020 7:57 AM

Cool, looking forward to Buzz getting his new peepers... 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Friday, June 5, 2020 11:49 AM

Gamera

Cool, looking forward to Buzz getting his new peepers... 

 

SPACE RANGER peepers!  To keep an ever vigilant watch for Zurg and and the Ko-Dan armada... Oh wrong space army.  My bad.  I’d better verify what enemy force we are supposed to be looking out for with Star Command.

“Ya ya ya, unicorn papoi!”

  • Member since
    January 2012
  • From: Cincinnati, OH
Posted by DanR1967 on Friday, June 5, 2020 12:57 PM
This is fun! Sometime you need to build something like this - something that just makes you smile.

Dan

https://danr67.imgur.com/

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.