SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

W.I.P. Andrea 54mm Fighting Knight

1609 views
19 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2006
  • From: Essex, UK
W.I.P. Andrea 54mm Fighting Knight
Posted by FingersEddie on Friday, July 4, 2008 7:27 AM

I've finished puttin' this one together, I had it runnin' while I was puttin' the finishin' touches to my Roman. I've been in love with this Andrea figure for awhile now 'cos of its strikin' and death dealin' pose, it jus' has so much life and dynamism. I haven't seen anythin' else that can rival it!

This is a 2005 model figure from Andrea, and the fit of the parts are jus' exquisite, everythin' matches up perfectly with little fuss. Its awesome!

 

 

"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    April 2008
  • From: Kristiansund, Norway
Posted by Huxy on Friday, July 4, 2008 9:14 AM
Can't wait to see it done! :)

"Every War Starts And Ends With An Invasion".

  • Member since
    September 2007
  • From: Relocating
Posted by Mobious on Friday, July 4, 2008 9:27 AM

 Hello FingersEddie,

 I like the layering on this sculpture.That's gonna look great finished.

 Best Regards,

 

"It's a problem of applied physics" Roy Brown

  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Saturday, July 5, 2008 1:03 PM

Thanks, dudes.

Here's where I am with this now. The plate is nearly finished.

 

"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Tuesday, July 8, 2008 9:41 AM

The armour has now been flatcoated, and i've gone ahead with this design.

I got this image off the net (any old lion will do), printed it out and then drew some basic lines over it, so that when I paint it, I can first copy these lines down, and end up havin' the symmetry of the lion laid out, and lookin' pretty good.

My finished image of the lion looks like this. I may touch in some more 'fur' effects on the knees when i've finished paintin' the same image on his shield, but at the moment I want to keep things a little simple and not overburden myself too much. Next up, the shadin' and highlightin'...

"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    September 2007
  • From: Relocating
Posted by Mobious on Tuesday, July 8, 2008 7:19 PM

 Hey Fingers,

 That lion looks great. I should have had you do my tatoo!

 Keep posting,

 Best regards,

"It's a problem of applied physics" Roy Brown

  • Member since
    December 2007
  • From: Louisville, KY.
Posted by Cosmic J on Thursday, July 10, 2008 1:23 AM
The armor looks awesome. What paint did you use?
  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Thursday, July 10, 2008 4:22 AM
Cos', I used Vallejo's alcohol based metallics. They contain real flakes of metal, in fact the paint is jus' like liquid metal. It is the most realistic stuff around. Vallejo even offer an anti-rust varnish for it. For all my metalwork, I use this stuff.
"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Thursday, July 10, 2008 4:31 AM

I got his tunic shaded and highlighted now. I still need to shade and dirty up the the shield.

In buildin' up the figure and dryfittin' the shield I went on to cement it in place and totally forgot to gouge it, and show battle damage. I'm quite *issed off about this really! Sad [:(]

 

"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    August 2006
  • From: The Green "Mountains", Vermont
Posted by IanIsBored2000 on Thursday, July 10, 2008 11:12 AM
I've accepted shading and hilighting as a hard learned skill that I have yet to acquire, but people who can freehand designs/family crest type things still amaze me.  Incredible work, especially on the lions.
"Scanlon: work your knobby hands on the table in front of you, constructing a make-beleive bomb to blow up a make-beleive world."
  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Thursday, July 10, 2008 12:29 PM

Thanks, Ian.

Got some progress made on this figure today. Time to start thinkin' about a base and a settin', I think.

 

"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    June 2006
  • From: AusTx, Live Music Capitol of the World
Posted by SteveM on Friday, July 11, 2008 5:56 AM

What were the colors used for the shading and highlighting on the tunic, oustide of the lion? You do know that any information you provide will be stolen and used, poorly, by me- right?

Can you use a rotary tool to gouge the shield a bit, then retouch the paint job? 

Steve

 

Steve M.

On the workbench: ginormous Kharkov dio

 

  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Friday, July 11, 2008 7:09 AM

Steve, the shade colours were a mix of Yellow Ochre and Lamp Black, and the highlight colour was straight Yellow Naples Hue. The basecoat colour was Vallejo 913 Yellow Ochre.

I thought about usin' a rotary tool, but i'm not sure whether it'll withstand the force or vibration. 

"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Sunday, July 13, 2008 7:08 AM

Got this nearly finished, now.

 

"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    August 2006
  • From: The Green "Mountains", Vermont
Posted by IanIsBored2000 on Sunday, July 13, 2008 11:56 AM

Flesh update looks great, and I like the bright blue sword sheath.  Just out of curiosity, have you ever done a base/scene with multiple figures in battle?  IMO the positioning of the figures has to be nearly perfect to look realistic, but I've always liked scenes with two opposing figures in a struggle.

"Scanlon: work your knobby hands on the table in front of you, constructing a make-beleive bomb to blow up a make-beleive world."
  • Member since
    May 2005
  • From: Dublin Rep Of Ireland
Posted by terry35 on Sunday, July 13, 2008 6:27 PM

Excellent work Paul, another show stopper.

Regards,

Terry.

  • Member since
    September 2007
  • From: Relocating
Posted by Mobious on Sunday, July 13, 2008 7:08 PM

 Hello FingersEddie,

 I just tuned in to see what's up, and you've completed another stunning work.Thumbs Up [tup] Very nice!

 Best Regards,

"It's a problem of applied physics" Roy Brown

  • Member since
    January 2008
  • From: Bournemouth UK
Posted by Bodge on Monday, July 14, 2008 3:30 PM
Way too talented.  Looking superb.
  • Member since
    April 2006
  • From: Essex, UK
Posted by FingersEddie on Tuesday, July 15, 2008 4:43 AM
Thanks for lookin' and commentin', guys.
"Ask not what you can do for your country, ask what your country is doin' to you!" "If liberty means anything at all, it means the right to tell people what they do not want to hear." "Say 'NO' to censorship, it leads to a dictatorship!" http://public.fotki.com/paulyrichard/
  • Member since
    January 2005
  • From: in the tank factory in my basement
Posted by biffa on Saturday, July 19, 2008 10:21 PM
Paul this is coming on a treat i absolutly love the face in fact this may be my favourite from you yet i cant wait to see it completed, amazing work man. 
Ron g.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.