That is so cool good luck!

Very cool! 

Looking forward to seeing how you proceed here. 

Evening all! Well after a bit of doctoring this morning, I got home and had most all day to work on Walle... Little more progress...

OK, I got the pieces to start the "eyes" with. The belt / disc sander did a super job shaping the plastic I had cut for the eyes. These little ole kids binoculars will work just fine for the assy, there was another set of toy binocs I'll use for outer lenses and the articulation point for the neck is from a toy telescope also from the thrift store.

had to trim the back ones to go over some irregularities on the back but other then that, they fit perfectly.

The little plastic discs I'm cutting with a drill press and a whole saw set are going to be the articulation joint to raise and lower the neck, the other is for the head to attach to the neck and allow the head to pivot and move up and down.

And they are epoxied in place.

And the neck is together, and that it for now... Thanks again for looking! Take care...

Doug

Great Maker... Thanks! I'm going to need it!

Gamera... Thank you sir! Again, if it comes out any where near how I see it in my mind, it'll be ok... Problem is I'm thinking a step or two ahead of what I'm working on at the time, and I tend to forget where I was! Lol...

Thanks again...

Doug

Super interesting project. Nice scratch-find-fitting of the thrift store parts.

 I'm especially interested in seeing the tracks and running gear go together. Subscribed.

Thank you Sprue one... That is the only thing I'm going to have to order. At this time its a bit down the road of the build, But so far I've not been able to source any broken construction toys the right size, so I found some 1/16 scale Lepoard Tank track from a source in China on E Bay. Its ordered and on the way. By the measurements given it will make an acceptable size track. Now, the drive assy... well that like everything else I will attempt to fabricate myself... I think it'll be OK. Thanks for the interest!

Doug

OK, a little more progress...

I got his neck completely asyembled and epoxied, then painted..

Ang getting his eyes painted pre assy.

And thats about it for now, More in a bit... Hope everyone had a good weekend! Thanks for looking...

Doug

I Say !

 You are doing a bang up job there .I s he going to have any weathering ? I bet you'll get is as good as what you have now . T.B.

Oh wow, you're making great progress there. Nice work Doug! 

Tank Builder... Thank you for the interest. Yes sir, my hope and intent is to make him look like he did in the movie. I hope...

Cliff, Thanks! Yeah so far its not been too difficult, but the tough part is going to be in the body. The way I'm thinking, he will need to be constructed kinda like a submarine, with an inner and outer hull, the way I intend to attach the arms and "legs". At least thats what I'm thinking... Any way, heres todays update.

I apologize I got carried away and forgot to take pictures, but I think you can see how I did this.I cut and shaped two sheets of .010 plastic sheet to wrap completely around the eye shapes, glued with regular ole cement. You can see the left side is still in the raw, but I painted it in Model Master Non buffing steel metalizer and let dry. It dries extremely fast being a lacquer and I use a bit hotter thinner then most thinners. Then using Ameracana brand latex paints (available at Hobby Lobby reasonable priced) I allpied layers of raw sieana, burnt sieana, raw umber, and burnt umber in layers to simulate in this case a light rusting. The little "patch " on the side is (in the pictures I have) some type of inspection access cover. Again, just a shaped strip of .010 plastic sheet glued down. I also added the three small screws per the pictures in the lens area and dirtied a bit with a thin mix of nato black through the air brush.

And later tonight I'll try to get the other one done. Thank you and take care!

Doug 

Your creativity is really showing here, Doug.

Thanks Greg... You know I love building kits, but now and then, I just like to try something diffefent that requires a bit more effort. Any way... Stayed up till about 2 finishing what I could on the eye/head assy...

The other eye is finished painting ans I've started rusting and weathering on the neck.

I've cut, shaped and folded the two shields above the eyes from an old lasagna tray lid, then painted the same. The pieces along the sides of the eyes were the left over pieces of the second set of toy binoculars, and mounted after drillind a series of vent holes in them.

And the head is finished enough for now to mount to the neck. There will be a bit more later to do, but for now it will be OK. Thanks for looking, I start the body section next.

Take care all!

Doug

Coming along great, love the rust effect you've got going there. 

Thanks Cliff... You know... Just pouring over the pictures I've printed off and trying to figure out what comes next is taking the bulk of the time on this, but hey... I'm enjoying doing it. Thanks again! 

Well... The body (again) will be built kind of like a submarine with an inner and outer hull. The original body piece needed to be strengthend to take the weight of the arms and legs when mounted. The octoganal pieces at the top of the picture are the rear area where it appears his rear door slides, Kind of like the back of a Trash truck. The side pieces are the square pieces lined off for cutting. This plastic sheet is a piece of .220 plastis from a local window shop I found for about 5$ in their seconds rack. It is much stronger and will easily support the added weight. The 5/16 sq tubing is already glued down and will serve as a stand off for the outer pieces.

The side have been prepared and glued in place. The rectangular cuts are where the clevis fot the arm will mount in order for it to slide. This one will not slide but will be in a fixed position. The deep scribing lines are where the body seperates when it opens to release the crushed load. Again, mine will not open, but with proper painting I should be able to make appear as if it would.

The rear door slide pieces in place and the trim and ribbing in place. And its time to allow this to set... More later, Back in a bit!

Doug

Again, very cool Doug! 

Doug, I could spend a lifetime and not figure out how to get as far as you already have!

Thanks Cliff, Thanks Greg... Well it just takes a little study time and patience(which I have little of) But I have to have, to be able to figure him out! 

Any way... A bit more progress...

I find that having it all 1 color I can see my progress a bit better, so after priming I decided to start work on the back side. The upper sliding door and handle are in place made with .093 plastic, square tubing and two sizes of rectangular plasti struct for strengthening ribbing. A piece of 3/16 aluminum tubing makes a convincing hinge (I hope) The corner bump guards I supposed were a tough rubber of sorts, but these are going to be shaped and made fron a piece of 1-1/2 wood corner trim, shaped on the belt/disc sander. The inner compartment door is again .093 plastic with popcicle sticks evenly spaced to simulate ribbing .

These pieces will make the "legs" that mount underneath and attach the tracks too. They were alot more mechanical looking in the pictures, but these were about the same shape and will not be very visable when mounted. They are the hind leg pieces from a robot dog, again found at the local thrift store. I have mixed and filled the cavities with a plaster /sand mix to add weight for additional stability when mounted.

And this is how I intend them to mount when needed.

And the front side about ready to finish. Again the corner guards shaped and in place, The stand offs glued down where the speaker plate, and the solar charge display will mount, along with the recess on either corner where the hands tuck in when he pulls himself into a cube shape. And thats about it for now. more later, and Thanks for the interest and for looking! 

Doug

Morning! More WIP from yesterday...

OK, The trim around the top is a poly vinal 11/16 corner trim, shaped and sanded thinner on the belt sander, The arm clevis slots, show in some pictures to be a rubber(?) type debris/weather stripping and in some a hair type. I could find neither that I thought I could use, so I glued strips of .010 X .250 plastic on both top and bottom then trimmed with a 1/16 round plastic piece. 

The disc near the back is a pivot pin cap, where his body would pivot back to open, when the load is deposited. I used super glue gel around the disc to simulate welding.

A back side view, I still need to make 2 small cylinders , 1 on either side of the hatch, but will wait until arms are made, which are also cylinders and do all 4 at the same time. Thanks again for looking...

Doug

Wow, you're making great progress there Doug! 

Ah one day I'll have to try scratchbuilding a 1/6th or so figure of one of my favorite robots- HK-47... 

Evening all!

Thanks Cliff... Hes coming along. I just have to try not to get too far ahead with my thinking and forget where I'm at now! lol... Any way,

I got some paint on him today. Krylon makes a very close what I call "School Bus Yellow" and for all intents... I think it'll do just fine.

There are several areas where I thought water and such would collect and likely cause a heavy rust condition, so I took a mist of lacquer thinner through the air brush and wrinkled the paint. I'm not real concerned with the "Finish and coverage" being Wall-E is around 700 yrs old. Hes going to be as you know fairly dirty and rusty any way.

Well apologizes, but I got carried away with the front door and had it made, installed and painted before taking a picture. The front door was made from an old lid from a Lasagna tray, thin and light weight material, but strong enough to work with. I left enough over hang to be able to "Fold" the edges all around to give it a bit more strength. Every picture of Wall-e I've seen has a dent in the door. Mine is a tad low, but I think it'll be OK. Any how, we'll let this set until morning and do some more work then if possible! Thanks again for looking and Take care!

Doug

Just catching up on this and thats some very impressive work there Doug.

Thanks Bish! Your kind words are appreciated... A bit more today,

Starting on the front, The speaker louvers are an old modem box, cut, sanded, reglued and shaped to fit, then a red button added for the record function. The solar disply is a piece of .093 plastic, clear, painted on the back side as close as I could mix to chartruce green, after drying, I flipped it over, taped off the bars, and painted flat black. When dry enough, I lettered with some dry transfer letters. The little sun symbol is a dot of air brushed yellow, and the sun "rays" are kill marks from a luftwaffe decal sheet with the national markings cut off.

OK, his name is applied bvia a piece of 2in masking tape with the name laid out on it with striping tape about 3/32 in, then cut with a new #11 blade and sprayed black. The circle was laid out the same but with a circle cutting compass, sprayed white, then when dry, the letter was laid out and resprayed with red. The rest is trimmed out as close as I could using the pictures as a guide.

And thats about it for now... Thanks for looking!

Doug

Your resourcefulness, skills, and rate of progress are inspiring.

What really impressers me is the imagination to see something and thing that could be used for such and such. That is amazing work Doug.

Sprue one, Thank you so very kindly for the encouragement and kind words. I do  try not to get too long winded, but there are sometimes things I can explane to help, or just maybe give ideas to like so many that I learned from over the years.

Bish... Also... Thank you kindly. You are one of the first folks that I had any dealings with when I joined the forums, and I do hold your comments and such, in high reguard. Like many folks, I learned over my near 50 years of working (professionely) in my career, many ways to do things correctly, incorrectly and to get you by. I apply much of that to my hobby of choice! lol... Thank you kindly...

Any way, I started to make his arms today, which are the cylinders mentioned earlier, and my blasted band saw broke. So... Until the parts to repair it arrive in a day or two, I'm going to attempt to make an acceptable Hal, his little cockroach buddy. 

OK, I think what I've rounded up here will do...

OK , to start I'm using a trimmed popcicle stick and some old spare part box airplane parts to make the body, and some tooth picks for legs. The legs are glued together and on with one of those "Ultra Violet" epoxy deals you order on the TV. Just put a bit of the clear epoxy on the joint and shine the supplied ultra violet light on it and it sets hard and fast. Very handy.

Got his little ole front legs on..

And some folded .010 plastic for the head and wings, a dab of paint airbrushed on, some copper wire for the feelers, and I believe hes about done.

And hes done... Well, I wanted to start on the tracke when the track arrives tomorrow (per the tracking number) but with the saw being down, maybe I can start the rusting and weathering. Thanks all... Take care...

Doug

Oh awesome job there on Hal!

Thank you Cliff... I mean , where would Wall-e be without his buddy! lol...

Well, My band saw parts haven't made it yet, so yesterday I started the rusting, chipping and wearhering. I was up at about 05:00 this morning with coffee at hand finishing up what I could on the body...

And thats about where we're at for now... Have a good weekend all! Thanks again...

Doug

Nice job!  I found this poked around online. Lifesize rc wall-e

https://www.google.com/amp/s/www.theverge.com/platform/amp/2013/8/5/4590092/pixar-wall-e-life-sized-robot-replica?source=images

Doug, blown away tracking this project. Truly amazing and inspiring! Thanks for taking us along for the ride!