hi jesse
![Wink [;)]](/FSM/CS/emoticons/icon_smile_wink.gif)
,what i did to make a stand for my rc-ships(+80cm) simply take a bendable piece of wire(i used the ones for in the garden)and bend it around your lower hull to the hight you want your stand to come. then copy the 2 bends (fore and aft) to a piece of wood and cut it out. then messure your 2 wood stands to a plank where your ship is comming on (put a centreline first to line it up and glue the 2 upstands at 90° angle to the centreline) hope your can get any wise out of this
![Tongue [:P]](/FSM/CS/emoticons/icon_smile_tongue.gif)
or else instaid of copy your bendable wire direct to your wood ,you can first copy it to cardboard so you can cut it a bit when it not fit right and the transfer it to wood.