SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/350 Trumpeter USS Freedom LCS

3253 views
30 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2014
Posted by modelcrazy on Saturday, January 9, 2021 11:24 AM

You know TB, I can see, hear and smell everything you're say'n. Eventhough I never owned a boat, I have spent the night on a few. A Cutter just isn't the same though...except for the coffee smell

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Saturday, January 9, 2021 8:45 AM

Hi Bill;

      This LCS thing reminds me of another type of Vessel. Remember the ones that came out that had a bigger gun forward and was supposed to be a go fast shallow water craft; I think it was called the U.S.S.Crockett( Sorry Davy). Seems the Turbine didn't like salt spray in it's innards!

      The Germans now have a type similar and they refer to them as Schnellbootes! An old name revived!

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Saturday, January 9, 2021 8:38 AM

You Know,Modelcrazy;

 Living Aboard is eye -opening! There's so much more as to the feeling of freedom from the tackiness of shore-life. Waking up to the gentle slap of small wavelets on the hull, seabirds calling, and the smell of fresh Hot coffee coming from the wheelhouse.( That's where I had my Coffeepot!)

 Oh! and not to forget the very small movements the vessel makes on its lines, as wind and passing boats make it react! One nice thing. No one can come to your door without you knowing it right then! Nor, the silence at night, broken only the occassional splash of a fish or marine critter.

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Saturday, January 9, 2021 8:32 AM

Yeah;

 I took mine off the shelf and piddled a little more on it. It is a straightforward build.

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Tuesday, January 5, 2021 4:19 PM

While I'm no fan of the 1:1 ship; the build of the kit is outstanding in every way.

  • Member since
    July 2014
Posted by modelcrazy on Tuesday, January 5, 2021 1:27 PM

Thanks BB

TB, it does kinda look like a Ya-chit (as my father called them)

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Tuesday, January 5, 2021 9:30 AM

Steve;

 I got to that point on mine and then stopped for some reason.That Kit builds up nice.

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Tuesday, January 5, 2021 9:25 AM

Yeaah;Cap'n Mac82

 I guess You are right. It's a shame about the Metal problems. Some according to crew, are fairly decent. Maybe we should solve the problems and make them Coast Guard Cutters?

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Tuesday, January 5, 2021 9:22 AM

Hi;

    You know, the more I look at one of those I think it would make a nice Live Aboard Mega Motor Yacht! I mean there'd be room even for a swimming pool ! Oh, and a garage for my Riva Ski Boat! And I could stretch my budget to bursting and get a Robinson Helo Too! Could probably figure out how to take my Bentley As Well!

   Ya See,I don't like boats that look like some Alien Pod on the water! I want, really if I could afford it, a Yacht or Live-Aboard sized boat that can take the worst Mother nature can deal out, short of a Rogue Wave or Tsunami!

  • Member since
    April 2020
  • From: Mountains of Western MD
Posted by BBorBust on Saturday, January 2, 2021 11:20 PM

Looking great so far steve. Cant wait to see the finished product!

  • Member since
    July 2014
Posted by modelcrazy on Saturday, January 2, 2021 11:12 PM

ikar01
Did you ever finish Akagi?

Still working on it my friend. I'm just taking a break. I'm shooting for a finish before Aug (long before preferably) so I can show it at the Nats.

I'm sorry about your job, that's tough. I was on SSDI before and after my double lung transplant but was able to get off it. Luckly, was am still employed working as a contract electronics tech at HP Inc. Oddly, theres only about 10 of us in the entire building, a building the size of a super Walmart. It'll be very strange when employes start returning.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Saturday, January 2, 2021 8:29 PM

Hey modelcrazy, at least you have a paygrade.  I haven't had a job since about March.  If it wasn't for my S.S. and disability check, we'd be so under water, you would need a sub to reach us.

Did you ever finish Akagi?

  • Member since
    July 2014
Posted by modelcrazy on Saturday, January 2, 2021 7:56 PM

Multi mission for all contingencies. Not feasible but a continuous unreachable goal. Everything to everybody. 

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Saturday, January 2, 2021 5:10 PM

modelcrazy
I.E. close to shore. They are more or less very large patrol boats.....with helo's. Kinda take the Coast Guards duty but under DOT instead of Homeland Security.

The working theory was that you could buils a hollow ship, and fit in various modules to optimize it for whatever the needed mission was.  And, since that covered all sorts of things like armaments and the like, the things would be cheap and eay to build.  Also, since they were largely "empty space" they'd be fast, too.

Those last bits have been sticky wickets. 

Also, having "mission modules" means having to have them all over the expected areas you are meant to employ the craft.  And, there's the issue of it's never just the one mission at a time.  The whole "we'll bolt on what we actually need, later" is why they went with only a 57mm deck gun.

So, yes, unloaded they can go pretty fast, except when their powerplants break down. which has been more frequent than expected (they expected the one powerplant to be all things at all times).  Also, fully loaded with a given mission module, they are quite heavier, and not quite as fast.

The tri-hull design would have been an excellent one to have used two powerplants, one for cruise, and the other for speed.  But, no, that was not politle to the monohull design.

It will likely become the F-35 of the surface fleet.

  • Member since
    July 2014
Posted by modelcrazy on Saturday, January 2, 2021 1:00 AM

I got quite a bit done to the LCS these last few days. The kit has an enormus amount of tiny parts, they look like cameras and speakers. Whatever they are, they take quite about of time to install.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2014
Posted by modelcrazy on Friday, January 1, 2021 5:45 PM

Littoral Combat Ship.

https://en.wikipedia.org/wiki/Littoral_combat_ship

Littoral meaning the littoral zone

https://en.wikipedia.org/wiki/Littoral_zone

I.E. close to shore. They are more or less very large patrol boats.....with helo's. Kinda take the Coast Guards duty but under DOT instead of Homeland Security.

I think they are cool looking and wanted one to build for quite some time. I would also like the trimaran USS Independance class.

Like I said, the decision to design and produce them is WAY over my paygrade.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    April 2015
Posted by Mopar Madness on Friday, January 1, 2021 5:28 PM

Steve, what is LCS?

Chad

God, Family, Models...

At the plate: 1/48 Airfix Bf109 & 1/35 Tamiya Famo

On deck: Who knows!

  • Member since
    September 2012
Posted by GMorrison on Friday, January 1, 2021 2:43 PM

Nice add to the collection. Maybe we can sell them to Saudi.

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Friday, January 1, 2021 1:10 PM

Tanker-Builder
Why a whole nuther Ship

Because congresscritters want fat defence contracts in their districts, and don't care if the produced thing "works" only that money was paid out in big scaks.

  • Member since
    July 2014
Posted by modelcrazy on Friday, January 1, 2021 11:05 AM

That decision is way above my paygrade.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Friday, January 1, 2021 8:18 AM

I just never understood;

 Why a whole nuther Ship with Differing metal problems when we have small ships in Reserve! With No Metal Problems!

  • Member since
    July 2014
Posted by modelcrazy on Thursday, December 31, 2020 7:20 PM

LOL you would think. I believe it has as much PE as the Akagi, just smaller.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    December 2003
  • From: 37deg 40.13' N 95deg 29.10'W
Posted by scottrc on Thursday, December 31, 2020 6:55 PM

This model should give you a nice break from the Akagi Steve.  

  • Member since
    January 2015
Posted by TheMongoose on Tuesday, December 29, 2020 10:08 PM

modelcrazy

Well you get your wish Matt.

Todays progress. Loyt of PE and wee bits. I can't believe I didn't loose any on the floor.

 

its all that Akagi practice, you'll never lose a piece to the carpet monster again...cough Wink

In the pattern: Scale Shipyard's 1/48 Balao Class Sub! leaning out the list...NOT! Ha, added to it again - Viper MkVii, 1/32 THUD & F-15J plus a weekend madness build!

  • Member since
    June 2008
Posted by lewbud on Tuesday, December 29, 2020 4:20 PM

Looking good Steve.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    March 2018
  • From: Chicago suburbs
Posted by Luvspinball on Tuesday, December 29, 2020 12:42 PM

modelcrazy

Lots of PE and wee bits. I can't believe I didn't loose any on the floor.

 

Yet; It's early in the build. Wink Looks like a great start though.

Bob

Bob Frysztak

Luvspinball

Current builds:  Revell 1/96 USS Constitution with extensive scratch building

  • Member since
    July 2014
Posted by modelcrazy on Monday, December 28, 2020 12:21 AM

Well you get your wish Matt.

Todays progress. Loyt of PE and wee bits. I can't believe I didn't loose any on the floor.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    April 2020
  • From: Mountains of Western MD
Posted by BBorBust on Sunday, December 27, 2020 5:05 PM

Santa is happy that you like it! Whistling can't wait to see it come together! 

  • Member since
    July 2014
Posted by modelcrazy on Friday, December 25, 2020 8:34 PM

LOL, thanks Bill. 

I made an OHP for last years SS. It came out great,  IMO Big Smile and will try to do the same for the LCS. It's a kit I've wanted for my collection for some time and was stoked to receive it.

I don't know much about the program but never understood the need for a close to shore platform. It does look cool though, but I like the F-35 as well Huh?.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.