SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/72 Takom Type 94 460mm Yamato turret

1666 views
47 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, January 15, 2021 12:49 PM

Thanks for a look at those. That first scheme is the one i had not accounte for when we dicussed it previously. I plan on doing the second scheme, as thats what i am doing my 350 kit in.

Be nice to get it mounted with a small section of deck around the front and sides.

I am a Norfolk man and i glory in being so

On the bench: Italeri 1/72nd Bell 212/Revell 1/72nd Type VIIc U-Boat/Trumpeter 1/32nd Me 262A-1a

  • Member since
    July 2014
Posted by modelcrazy on Friday, January 15, 2021 11:03 AM

Bish, I figured that as well. The Bruno kit does seem more detailed as well.

Yes the plate comes with the kit but I didn't see one for the Bismarck.

There is no deck, just the barbette.

The color chart shows the color in the Yard at B&V, Phase one, two and three of operation Rheinubung and the controversial yellow top as told by Burkard Baron Von Mullenheim-Rechberg in his book "The Battleship Bismarck, a survivors story". He was the commander of the Bruno turret and stated that the turrets wore yellow for a few days.

I'm assuming the Bruno kit is similar to the Yamato kit. The barrel receivers (step 10) are redundent. I'm just going to glue the blast bags to the glacis (step 13).

Thanks Tojo!

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Friday, January 15, 2021 8:29 AM
Very cool build

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, January 15, 2021 8:00 AM

That looks stunning Steve, very nicely done and a nice base. Does that and the nameplate all come with the kit.

I am a Norfolk man and i glory in being so

On the bench: Italeri 1/72nd Bell 212/Revell 1/72nd Type VIIc U-Boat/Trumpeter 1/32nd Me 262A-1a

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, January 15, 2021 7:59 AM

I figured the Bruno would be quite a bit smaller. I guess thats why they picked Bruno and not Anton. The extra detail under the turret makes up for the smaller size.

I am a Norfolk man and i glory in being so

On the bench: Italeri 1/72nd Bell 212/Revell 1/72nd Type VIIc U-Boat/Trumpeter 1/32nd Me 262A-1a

  • Member since
    July 2014
Posted by modelcrazy on Thursday, January 14, 2021 11:32 PM

Yes, 15" vs 18" twin barrels vs tripple barrles. Bismarck launched Feb 39, Yamato launched 16 months later, Aug 40. Similar technology. One was trying to look somewhat legal, that other couldn't care less.

Here it is finished. I very easy kit doring assembly but the difficulty was try to get the paing, weathering and general use ballanced for a ship that was maintained but rarely used.

 Like I said earler, leaving the receivers out helped with construction and I plan to do that with Bruno. Bruno does seem to be a more involved kit so I'm glad I got this experience under my belt befor starting it.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    April 2020
  • From: Mountains of Western MD
Posted by BBorBust on Thursday, January 14, 2021 5:40 PM

WOW! Really puts in perspective the difference of 15 inch guns compared to 18 inch!

  • Member since
    July 2014
Posted by modelcrazy on Thursday, January 14, 2021 4:59 PM

Thanks BB!

Yep, I thought so.

Wow, What a diffrence in size.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    April 2020
  • From: Mountains of Western MD
Posted by BBorBust on Thursday, January 14, 2021 4:21 PM

Excellent work Steve. Looking great so far. Making me want to get one and build it! Keep up the great work.

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, January 14, 2021 4:15 PM

Look forward to seeing that. I think i will get mine from Hannants when i order from them later in the year, if its in by then. I tend to get stung with import duties with anything from japan.

I am a Norfolk man and i glory in being so

On the bench: Italeri 1/72nd Bell 212/Revell 1/72nd Type VIIc U-Boat/Trumpeter 1/32nd Me 262A-1a

  • Member since
    July 2014
Posted by modelcrazy on Thursday, January 14, 2021 2:12 PM

Bish

Looking nice Steve. Are the blast bags plastic, they look very realistic.

I take it you have ordered the Bruno from Japan.

 

Yes, and yes. In fact, I should be receiving the Bruno today or tomorrow.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, January 14, 2021 1:56 PM

Looking nice Steve. Are the blast bags plastic, they look very realistic.

I take it you have ordered the Bruno from Japan.

I am a Norfolk man and i glory in being so

On the bench: Italeri 1/72nd Bell 212/Revell 1/72nd Type VIIc U-Boat/Trumpeter 1/32nd Me 262A-1a

  • Member since
    July 2014
Posted by modelcrazy on Thursday, January 14, 2021 9:33 AM

The turret is almost done. I finished the deck and ran the railings on the turret. I need to tone down the rust on the top of the turret before spraying a flat coat. A couple of passes with some Turpenoid should do the trick.

I thought I had a picture of the finished deck 

Oddly eneough, I believe the Bruno is arriving today.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2014
Posted by modelcrazy on Tuesday, January 12, 2021 10:57 AM

Thanks John,

I have been painting both the base and turret. The turret is done and the oils are drying before I string the wire. I still need to paint the blast bags once I mix up a color that looks right. The deck color was hard to match since the Japanese decks were more yellow than ours or the Germans but I think I have the base coat done. Now I need to add some oils.

I did not heavily weather the turret because the most action the Yamato saw was in port. She was commonly know as the Hotel Yamato.

She traveled around from base to base but the only major action that I'm aware of was Midway, where she never was in battle, the Battle of the Philippine sea where she fired at Japanese planes by mistake, The battle of Layte Gulf while during the Battle of the Sibuyan Sea, she lost her sister ship Musashi to naval air attack, the battle off Samar where she hit the DD USS Johnston and the CVE USS Gambier Bay with her main guns, both ships were lost to enemy fire. Operation Ten-Go was her last sortie when she left port on a suiside mission to defend Okinawa. The Allies intercepted and decoaded raidio transmissions which allowed the Americans to spot, track and eventually sink the Yamato where she lies 290 Km southwest of Kyushu and under 340 meters of water, her turrets falling out of their barbets long before she settled on the bottom.

First coat on the deck

Turret complete except for a dull coat and the railings.

Anyone who is planning to build this kit, or the Bruno I would assume, could really skip step 2 I believe. I found that the barrel receivers installed in this step are a redundant step and since you will be glueing the balst bags to the turret glacis, are unnecessary. I had a hard time seeting the barrels into the recivers all the way so I removed them.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    May 2020
Posted by Keyserj on Saturday, January 9, 2021 5:14 PM

Although it ain't a full ship, looks like it'll still take up some shelf space! Looking good so far.

"Why don't you knock it off with them negative waves?"- Oddball

 

John

On the bench:

1/35 Trumpeter m1132 ESV Stryker

1/48 Tamiya m1a1 Abrams (Gulf War GB)

                     

  • Member since
    July 2014
Posted by modelcrazy on Friday, January 8, 2021 1:21 PM

Bish

Thats some nice work there, it is a beast.

That is an understatement mate. It may take more than one bottle to paint it.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, January 8, 2021 1:06 PM

Thats some nice work there, it is a beast.

I am a Norfolk man and i glory in being so

On the bench: Italeri 1/72nd Bell 212/Revell 1/72nd Type VIIc U-Boat/Trumpeter 1/32nd Me 262A-1a

  • Member since
    July 2014
Posted by modelcrazy on Friday, January 8, 2021 12:40 PM

I swung by the local HL today and picked up some bead wire, thinking that may work for the railing.

I'm thinking that may work, at least better than monofilament or thread.

After looking over the entire build repairing any bent or detatched items, I cleaned it up and painted my customary black base. I'll lightly sand down the deck to remove the top coat before painting it.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2014
Posted by modelcrazy on Thursday, January 7, 2021 2:33 PM

It's been very easy Bruce, the only caution is the stanchions, other than that it's pretty forward. Maybe some filler here and there.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    May 2013
  • From: From the Mit, but live in Mason, O high ho
Posted by hogfanfs on Thursday, January 7, 2021 2:13 PM

Looking good, Steve!

Going to keep some notes from your build for when I dig out mine. 

 Bruce

 

 On the bench:  1/48 Eduard MiG-21MF

                        1/35 Takom Merkava Mk.I

 

  • Member since
    August 2013
  • From: Michigan
Posted by Straycat1911 on Thursday, January 7, 2021 11:58 AM

modelcrazy

I don't know if they make AM for it yet. It does come with some PE.

I do have the Bismarck's Bruno turret on the way. I have either read, seen or heard that Takom is also coming out with the 16" Iowa turret. You never know about the Arizona, maybe the KGV as well.

 

I'd be up for one of the Iowa turrets, definitely set it up as a museum diorama. 

  • Member since
    July 2014
Posted by modelcrazy on Thursday, January 7, 2021 10:20 AM

Thanks Bob, but only four caused problems and were easly reapired.

I do believe it's ready for paint, once I take off the tape that is. It's intresting that Takom made the deck at an angle, like the gun was pointing a few deg off port.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    March 2018
  • From: Chicago suburbs
Posted by Luvspinball on Wednesday, January 6, 2021 11:54 PM

Stanchions are easy to find if you build wooden ships.  Ages of Sail has all kinds of brass stanchions of various lengths and number of holes.  And they are not fragile.

Bob

Bob Frysztak

Luvspinball

Current builds:  Revell 1/96 USS Constitution with extensive scratch building

  • Member since
    July 2014
Posted by modelcrazy on Wednesday, January 6, 2021 7:44 PM

ikar01

Don't you need wood on the deck aroiund the turret mount?

I was thinking of painting it.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    June 2008
Posted by lewbud on Wednesday, January 6, 2021 6:28 PM

This is supposed to be an easy build. Don't go giving him ideas.Big Smile

 

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Wednesday, January 6, 2021 4:23 PM

Don't you need wood on the deck aroiund the turret mount?

  • Member since
    July 2014
Posted by modelcrazy on Wednesday, January 6, 2021 3:11 PM

It's been a few days. Sanding the barrels and adding PE to the turret. Here is the result.

The barrels have the black primer to help find where I need to work on the seams. Those I found I added a small amount of thin CA and will sand them smooth tonight. Just a few more parts and ready to paint.

For those who will be building this, the stanchion poles are VERY fragile and break easly when removing them. In fact, I believe some were already broken. They are easy to repair and Takom gives you a few extra. Looks like I have a few to streighten.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2014
Posted by modelcrazy on Sunday, January 3, 2021 7:11 PM

I found them at HobbyLink Japan, eBay and the Takom site. I don't know if you can order off the Takom site though.

I ordered both off eBay and they were around $60 + and the Bruno was $50+

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Sunday, January 3, 2021 3:59 PM

You could always display it like it was in a museum and put just aboiut any type figure near it you want to.  You wouild think that somwthing that large woiuld have rifling in the barrels.

I may have missed it but where do you find these kits and what do they go for?

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.