SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Apollo 12 Diorama

12541 views
19 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2007
  • From: Ontario, Canada
Apollo 12 Diorama
Posted by mallagoodee on Tuesday, December 30, 2008 1:49 PM
This my diorama of Apollo 12, using the Monogram 1/48 LM, and two New Ware sets ... the MESA and the LM update set, with RCS nozzles, antennae, landing pads, front porch, hatch, flag holder and more!)

I also gutted the kit descent stage by cutting out the Quad panels and covering 'em with 'gold' foil. Rebuilt the ladder, scratchbuilt the RTG ( Radioisotope Thermoelectric Generator ) and lots of other things.

The Surveyor 3 is a scratch build.

















And the photo I based the diorama on.



Thanx for looking!

Pete
  • Member since
    November 2005
Posted by Anonymous on Tuesday, December 30, 2008 4:12 PM
Awesome work...what did you use for the gold foil?  You should post this in the Dio forum as well...
  • Member since
    October 2008
  • From: SE Pennsylvania
Posted by padakr on Tuesday, December 30, 2008 5:37 PM

Very impressive.  How long did it take you?

 

  • Member since
    November 2003
  • From: Virginia
Posted by Mike F6F on Tuesday, December 30, 2008 8:05 PM
Pete is the LM Man!

That Surveyor looks very nice.

You just need Al Bean trying to find the camera timer in the sample bag!

Mike

Mike

 

"Grumman on a Navy Airplane is like Sterling on Silver."

  • Member since
    February 2003
Posted by Jim Barton on Tuesday, December 30, 2008 8:52 PM
Beautiful work!Thumbs Up [tup]Thumbs Up [tup] Is that gold Bare-Metal Foil?

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

  • Member since
    July 2007
  • From: Ontario, Canada
Posted by mallagoodee on Wednesday, December 31, 2008 2:55 AM
Thanx guys.
The Surveyor, as a scratchbuild, took about 70 hours to do, including looking for photo references. The rest of it took about 150 hours or so. I was doing a 1/48 LM cutaway simultaneously.

And the foil is from chocolate bar wrappers. Adhered with Micro Metal Foil Adhesive.

And I toyed with having Al Bean and Pete Conrad posing together, but wanted this display to be fairly representative of the real event.

Happy 2009!

Pete
  • Member since
    February 2007
Posted by mitsdude on Wednesday, December 31, 2008 4:04 AM

Nice!!!

Is the Surveyor scratch built or a kit?

What did you use to build the base-crater?

 

  • Member since
    August 2004
  • From: Buffalo NY
Posted by Thehannaman2 on Wednesday, December 31, 2008 7:46 PM
Inspired.  Very nicely done.

Justen

"The distance between genius and insanity is measured only by success."

Member IPMS Niagara Frontier. "The BuffCon Boys."

IPMSUSA Member 45680 

  • Member since
    December 2002
  • From: Connecticut, USA
Posted by Aurora-7 on Monday, January 5, 2009 7:14 PM
Really nice work. Love the moonscape.

 

 

  • Member since
    March 2003
  • From: Newport News VA
Posted by Buddho on Monday, January 5, 2009 8:27 PM
Excellent work ...this is really impressive!

  • Member since
    January 2006
Posted by Rocket on Tuesday, January 6, 2009 9:39 PM

Pete: In a word...Fantastic! Apollo 12 is my favorite mission, and you captured this perfectly in your model. Thanks for both posting this and for the inspiration!

Mike

  • Member since
    July 2007
  • From: Ontario, Canada
Posted by mallagoodee on Wednesday, January 7, 2009 5:39 AM
Thanx a lot guys!
On the actual mission, the LM landed a mere 600 ft from the Surveyor and if I wanted to do a scale diorama of this, the whole thing would have had to be around 16 ft long. As it is, it's about 30" square and quite big enough ... it just fits on a display table.

And the base is a sheet of drywall, with florist's foam bricks used to build it up and covered with a thin layer of "PolyFilla InstaFill" (Spackle). Craters were made with a wet finger and various sized balls pressed into the spackle and sprayed primer with some lighter grey highlights.

It'll be 40 years in November 2009 ... I remember reading that Pete Conrad's first words when he stepped onto the moon's surface, were, something to the effect " ... that may have been a small step for Neil, but it was big one for me ... "

Pete
  • Member since
    May 2008
  • From: Ypsilanti, MI
Posted by MIflyer on Wednesday, January 7, 2009 12:21 PM

I couldn't tell an accurate lunar module from an inaccurate one to save my life, but yours sure looks good - the slightly wrinkled gold foil looks particularly well done.

Very nice display base, as well. Yours is the first moonscape I've ever seen. Looks to me like you nailed it! Thumbs Up [tup]

Kevin

Kevin Johnson    Ypsilanti, Michigan USA

On the bench: 1/72 Fujimi Ki-36 J-BAAR

  • Member since
    October 2006
  • From: Lakewood, CO
Posted by kenjitak on Thursday, January 8, 2009 11:40 AM
That's a great diorama! The only thing I 'd do differently is maybe having Al Bean "beaning" the video camera with his hammer! Great job!

Ken

  • Member since
    February 2006
  • From: Cincinnati Ohio
Posted by DantheMan85 on Sunday, January 11, 2009 7:54 PM
Outstanding diorama Mallegoodee, nice work on everthing. Thumbs Up [tup]Thumbs Up [tup]

On my Work Bench: Tamiya Ford GT 1/24

Up Coming: ?

           

 

  • Member since
    March 2005
  • From: West Virginia, USA
Posted by mfsob on Monday, January 12, 2009 7:52 PM
Now I know that all those stories about the moon landings being faked were true ... very nicel done.
  • Member since
    May 2008
  • From: Wherever the hunt takes me
Posted by Boba Fett on Wednesday, January 14, 2009 4:32 PM

 mfsob wrote:
Now I know that all those stories about the moon landings being faked were true ... very nicel done.

LOL! Laugh [(-D] Good one! Very nice job! There seems to be a little dead space in the middle, but, considering that there were only 2 people... Good work all-around!

  • Member since
    March 2009
Posted by ase3usn on Tuesday, March 3, 2009 9:27 PM
really great dio space program is one of my favorite topics. you nailed this. im 50 and lived and breathed rhe space program as a kid.they called apollo 12 the rock and roll mission.
  • Member since
    February 2003
  • From: Canada
Posted by spacenut on Friday, March 27, 2009 10:35 PM
What an extremely well done piece of work.  Pete Conrad would have been very proud of this. 
  • Member since
    February 2005
  • From: Australia
Posted by rokket on Sunday, June 28, 2009 2:27 AM
Very impressive, excellent work! Love it!
AMP - Accurate Model Parts Fabric Flags, AM Uboat Goodies & More http://amp.rokket.biz/
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.