- Member since
December 2003
|
Posted by modelnut4
on Monday, July 12, 2004 7:57 AM
Hi Guys,
I always dip my canopy's in Future, set them on a bit of wax paper and cover them with a glass while they dry hard. It helps if you wick the excess off on a piece of paper toweling before setting it aside to dry. The parts can be handled in less than an hour and then let them cure for 48 before you try masking with low tack tape or frisket paper. Just before you start to paint, go over your mask's edges with the tip of a round pointed toothpick to ensure the edges are down and you don't get the dreaded paint creep under your mask.. Hope this helps.
Jay modelnut 4
AKA treadhead 1952
Las Vegas, NV
|