Find us on Youtube Find us on Facebook Follow us on Twitter Follow us on Pinterest Sign up for our email newsletter
See inside current issue of Finescale Modeler Magazine
See inside current issue of Finescale Modeler Magazine

THE MAGAZINE

        CONTACT US

          RECENT ARTICLES

          POPULAR TOPICS

          RECENT REVIEWS

          POPULAR TOPICS

            RECENT REVIEWS

            POPULAR TOPICS

              RECENT VIDEOS

              POPULAR TOPICS

                RECENT THREADS

                CATEGORIES

                  NEW PRODUCTS

                  OUR STORE

                    CURRENT ISSUE

                    See inside the current issue of Finescale Modeler Magazine

                        SEARCH FINESCALE.COM

                        Enter keywords or a search phrase below:

                        Search

                        Cutting metal tubing

                        1282 views
                        9 replies
                        1 rating 2 rating 3 rating 4 rating 5 rating
                        Anonymous
                        • Member since
                          November 2005
                        Posted by Anonymous on Sunday, August 3, 2003 11:09 PM
                        I bought one made by K&S at the train shop. It looks like a full size pipe cutter but is made for 1/32 to about 3/4 of an inch. I can send a pic if you would like. It cuts straight and smooth.
                        Report Abuse
                        Anonymous
                        • Member since
                          November 2005
                        Posted by Anonymous on Sunday, August 3, 2003 7:02 PM
                        QUOTE: I just slowly roll the tube with a knife on the cork side of a coaster applying a light pressure. The cut I obtain is almost perfect and it can be easily filed with sandpaper or a file. Cheap, effective and very precise!


                        This exactly how a tubing cutter and even large power pipe cutters work. The tubing is rolled between a blade and an anvil, this leaves a small ridge in the ID of the tube but it can be easily removed.
                        Report Abuse
                        Anonymous
                        • Member since
                          November 2005
                        Posted by Anonymous on Sunday, August 3, 2003 6:04 PM
                        thanks so much for all your tips! I dont have a dremel so i think i'll try one of the manual saw/cut methosds. Wish me luck!
                        Report Abuse
                        Anonymous
                        • Member since
                          November 2005
                        Posted by Anonymous on Sunday, August 3, 2003 11:30 AM
                        For fine brass or stainless steel tubing, I use a cut-off wheel to cut it to length. Then square up the cut end and the outside edge with the fine side of an emery board. Finally I clean up the inside of the cut end with the point of an old #11 blade. All very easy. Wink [;)]

                        Pete
                        Report Abuse
                        Anonymous
                        • Member since
                          November 2005
                        Posted by Anonymous on Thursday, July 31, 2003 1:49 PM
                        I just slowly roll the tube with a knife on the cork side of a coaster applying a light pressure. The cut I obtain is almost perfect and it can be easily filed with sandpaper or a file. Cheap, effective and very precise!
                        Report Abuse
                        seaphoto
                        • Member since
                          February 2003
                        • From: Grass Valley, CA
                        Posted by seaphoto on Thursday, July 31, 2003 1:43 PM
                        If you are going to cut a lot of tubing, consider getting the motorized cut off wheel sold by Micro Mark (harbor freight also sells a cheaper version that is not as well made). These are by far the best solution for cutting metal rod and tubing up to a half inch or so.

                        Kurt

                        Kurt Greiner

                        Interested in large scale, radio control warships? http://www.warshipmodelsunderway.com

                        Report Abuse
                        wayne baker
                        • Member since
                          February 2003
                        • From: Medina, Ohio
                        Posted by wayne baker on Thursday, July 31, 2003 12:45 PM
                        When using the Dremel, I hold the piece for the barrel with some pliers, to keep it from flying and it gets hot. Also keeps my fingers away from the cutting wheel.

                         I may get so drunk, I have to crawl home. But dammit, I'll crawl like a Marine.

                        Report Abuse
                        styrene
                        • Member since
                          May 2003
                        • From: The flat lands of the Southeast
                        Posted by styrene on Thursday, July 31, 2003 11:37 AM
                        A Dremel tool with a cutter wheel works real well. The wheel Looks like a thin piece of VERY rigid sandpaper, and will go through tubing very efficiently. Available through Lowe's, Home Depot, MicroMark, etc.
                        Gip Winecoff

                        1882: "God is dead"--F. Nietzsche

                        1900: "Nietzsche is dead"--God

                        Report Abuse
                        berny13
                        • Member since
                          February 2003
                        • From: Panama City, Florida, Hurricane Alley
                        Posted by berny13 on Thursday, July 31, 2003 10:32 AM
                        Use fine teeth saw blades. X-acto has some that will fit the small handle. X-acto also makes a razor saw which will also work. After cutting, use a round file to smooth out the end of the tube.

                        Berny

                         Phormer Phantom Phixer

                        On the bench

                        TF-102A Delta Dagger, 32nd FIS, 54-1370, 1/48 scale. Monogram Pro Modeler with C&H conversion.  

                        Revell F-4E Phantom II 33rd TFW, 58th TFS, 69-260, 1/32 scale. 

                        Tamiya F-4D Phantom II, 13th TFS, 66-8711, 1/32 scale.  F-4 Phantom Group Build. 

                         

                        Report Abuse
                        Anonymous
                        • Member since
                          November 2005
                        Cutting metal tubing
                        Posted by Anonymous on Thursday, July 31, 2003 9:49 AM
                        When you cut metal tubing for guns, how do you do it without pinching the ends?
                        Report Abuse
                        JOIN OUR COMMUNITY!

                        Our community is FREE to join. To participate you must either login or register for an account.

                        SEARCH FORUMS
                        FREE NEWSLETTER
                        SIGN UP
                        By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.
                          More great sites from Kalmbach Media
                            Terms Of Use | Privacy Policy | Copyright Policy