SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Stripping Paint with Windex (is it possible)

20634 views
22 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2013
  • From: Chicago area
Posted by modelmaker66 on Thursday, February 18, 2016 4:08 PM

you can strip newly painted items painted in acrylic with windex. for set up acrylic i simple green. Spray on, wait a few min. scrub with toothbrush, rinse  and repeat as necessary. never let it set very long though so i cant reccommend that

  • Member since
    January 2008
  • From: Australia
Posted by Red Comet on Sunday, January 27, 2008 6:15 PM

I'm a big fan of using window cleaner for stripping acrylic paint too. In fact, I wrote a tutorial on how to do it : 

http://www.ghostofzeon.com/diy/paintstrip/paintstrip.html

Hope you all find this of help! Big Smile [:D]

  • Member since
    February 2004
  • From: Humble
Posted by rrmmodeler on Tuesday, January 22, 2008 4:41 PM
I have had no problems using Windex to striping acrlyic paints. Its definitly a save way to strip clear parts. I had a canopy painted up on a old mothballed project. I needed a new one for a new project so I took the old canopy and dropped it into a cup of Windex. The canopy had been painted two years before, and futured. In no time the canopy was like it had just came out of the box. After the paint was gone I washed in with some warm water and I had a new canopy ready to be futured and painted.
  • Member since
    August 2006
  • From: Neenah, WI
Posted by HawkeyeHobbies on Thursday, January 3, 2008 4:20 PM

Spontanious Stripping Tank....err bag!

I needed to strip the paint off a set of wings I had pre paint then changed my mind about the scheme. Dumped a little Windex and some Simple Green into a Ziploc bag...bingo it only took a few minutes. Poured the mix back into the storage jar and I was done.

Gerald "Hawkeye" Voigt

http://hawkeyes-squawkbox.com/

 

 

"Its not the workbench that makes the model, it is the modeler at the workbench."

  • Member since
    December 2007
  • From: Florida
Posted by warmaster on Tuesday, January 1, 2008 4:29 PM
I came across this thread and read it eagerly because I have made some painting mistakes and wanted to strip off the paint and start over. After reading the suggestions, I used some denatured alcohol I had around and a few minutes in that and scrubbing with a toothbrush worked wonders on acrylic paint. Chalk up another alternative!
"Not a soldier, just a patriot."
  • Member since
    December 2002
  • From: Reno, NV
Posted by espins1 on Monday, November 19, 2007 1:51 PM
I've never had any problems using Windex to remove acrylic paint.  Even paint that was on for 2 years came off in moments with a couple of spritzes of windex and a rinse in water.

Scott Espin - IPMS Reno High Rollers  Geeked My Reviews 

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Monday, November 19, 2007 3:20 AM
 Grampa wrote:

Does Windex work on enamel?  How about Lacquer? Question [?]

Jerry

Jerry,

For enamels and lacquers use Super Clean or Easy Off oven cleaner (yellow can).

Here is a good read: http://www.bonediggers.com/1-3/strip/strip.html 

 

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    December 2006
  • From: Markham ON
Posted by J West on Tuesday, October 30, 2007 4:33 PM
I was surprised by it as well. It was not a very heavy layer of paint + future on the model so that may be part of the success, another maybe in the difference of paint vs. primer. The model was spray primed with Citidel Chaos Black primer which was not disturbed at all by the windex. There may be a poor adhesion between the paint and the primer?
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Tuesday, October 30, 2007 2:49 PM
 J West wrote:

***Update***

I attempted the windex paint removal this evening. I had only a 1/3 of a spray bottle of windex, so I placed the model in a disposable tupperware type container and started spraying it. After a good coating, I left it for five miniutes while I left the room as I dislike the smell of windex. On returning I sprayed more on it and watched as the paint washed right off. I have never had success like this even with CSC as it always required a soaking, however this had the paint removed down to the primer almost immediately.  

That is interesting as Super Clean has worked far better than anything I have ever tried.  

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    February 2003
Posted by mass tactical on Tuesday, October 23, 2007 12:13 PM

91% Isopropyl Alcohol works great on removing Tamiya paints.  A short soak will loosen it right up.

 

Mike

  • Member since
    August 2007
  • From: Toms River New Jersey
Posted by Grampa on Tuesday, October 23, 2007 9:27 AM

Thanks for the info, Ross

Jerry

You can never have enough Corsairs!
  • Member since
    January 2003
  • From: Peoples Socialist Democratic Republic of Illinois
Posted by Triarius on Tuesday, October 23, 2007 8:59 AM
No, Jerry, acrylics only.

Ross Martinek A little strangeness, now and then, is a good thing… Wink

  • Member since
    August 2007
  • From: Toms River New Jersey
Posted by Grampa on Tuesday, October 23, 2007 6:51 AM

Does Windex work on enamel?  How about Lacquer? Question [?]

Jerry

You can never have enough Corsairs!
  • Member since
    May 2005
  • From: Left forever
Posted by Bgrigg on Sunday, October 21, 2007 9:15 PM

Good news!

I never even attempted to just spray it on. Banged Head [banghead]

I use Windex for cleaning my AB and save the residue in a large jar for soaking bad paint jobs in.  

So long folks!

  • Member since
    August 2007
Posted by ben1227 on Sunday, October 21, 2007 7:47 PM

I thought it'd work...

.:On the Bench:. Tamiya 1/72 M6A1-K
  • Member since
    December 2006
  • From: Markham ON
Posted by J West on Sunday, October 21, 2007 7:18 PM

***Update***

I attempted the windex paint removal this evening. I had only a 1/3 of a spray bottle of windex, so I placed the model in a disposable tupperware type container and started spraying it. After a good coating, I left it for five miniutes while I left the room as I dislike the smell of windex. On returning I sprayed more on it and watched as the paint washed right off. I have never had success like this even with CSC as it always required a soaking, however this had the paint removed down to the primer almost immediately.  

  • Member since
    August 2007
Posted by ben1227 on Sunday, October 21, 2007 6:43 PM
Yea, it'd take a LOT of Windex. It may take 2-3 of the big Refill size jugs.
.:On the Bench:. Tamiya 1/72 M6A1-K
  • Member since
    October 2004
  • From: Mesa, AZ
Posted by jschlechty on Sunday, October 21, 2007 3:56 PM
Yup - it'll soak off paint, Future, decals, everything if left in it long enough!  The only problem is getting a contianer big enough to be bale to cover the model with windex.  If you don't want to use that much WIndex, you could do it one side at a time and turn it over, etc. . .

  • Member since
    August 2007
Posted by ben1227 on Saturday, October 20, 2007 2:10 PM
I agree, it may require a little scrubbing in places since the paint's sat on there that long.
.:On the Bench:. Tamiya 1/72 M6A1-K
  • Member since
    January 2003
  • From: Peoples Socialist Democratic Republic of Illinois
Posted by Triarius on Saturday, October 20, 2007 1:56 PM
Sign - Ditto [#ditto]

Ross Martinek A little strangeness, now and then, is a good thing… Wink

  • Member since
    January 2007
Posted by IYAAYAS on Saturday, October 20, 2007 1:39 PM
most likely it will work with a little "Persuasion" from a tooth brush of the like.
  • Member since
    May 2005
  • From: Left forever
Posted by Bgrigg on Saturday, October 20, 2007 12:50 PM
Windex will soak it off. It may leave some residue, but the vast majority will come right off.

So long folks!

  • Member since
    December 2006
  • From: Markham ON
Stripping Paint with Windex (is it possible)
Posted by J West on Saturday, October 20, 2007 12:47 PM
I have a KV2 that has been painted, however I am not happy with it and want to start back at square one. Usually I use CSC, but currently do not have any. It is painted with tamyia acrylics and over coated with future. I know windex will remove freshly sprayed paint, but this model has had several months to cure and so I am unsure of what will happen. Does anyone have any advice? I figure it probably wont hurt it regardless, but am not sure.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.