Enter keywords or a search phrase below:
Tamiya Acrylic, 3 paint > 2 thinner, 15>25 psi dependent on job, through gravity H&S.
Alclad, I have a special arrangement - they thin it for me, 10>15psi through same brush.
Humbrol Acrylic - no luck - no matter what the numbers.
WWW.AIR-CRAFT.NET
I use Tamiya Acrylics only. There are no perfect answers for any paint. Different colors require different thinning. For what it's worth, I thin to the consistency of 2% milk, typically between 60-80% paint. Lighter colors get thinned less, darker colors more.
Air pressure is another thing that gets compensated as needed. With my 100LG gravity fed I'm between 12-17 psi; my 150 or 200 siphon fed I'm around 15-20 psi. My 350 external mix clone is between 20-25 psi.
So long folks!
As the title above states, I have many different types of paints - acrylics, enamels and lacquers. I am preparing to do more airbrushing. As we all have our favorites, as well as different compressors, airbrushes and techniques, I realize that there are many variables., I would like to compile a list of your paints/thinner to paint ratios/ rough pressure ranges that you shoot at. I will use this as a starting point to work from with my own combination of equipemnt Any suggestions would be appreciated. Thanks in advance.
David.
Our community is FREE to join. To participate you must either login or register for an account.