SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Any suggestions for Tamiya Flat Flesh

1186 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2011
  • From: Ontario, Canada
Any suggestions for Tamiya Flat Flesh
Posted by gunner_chris on Sunday, September 25, 2011 6:27 PM
I primed some 1/72 figures, then put first coat of the Tamiya flat flesh but my guys look like they haven't seen sunlight in 5 years. Any suggestions for mixing with this paint to make it more realistic?

  • Member since
    January 2007
Posted by the doog on Monday, September 26, 2011 2:27 PM

My sincere suggestion is to ditch the paint. Tamiya is notoriously hard to brush-paint.. It dries too quickly, which is exactly what you don't want for figures.

My suggestion is to use any good quality artist's acrylics. You can get some Windsor & Newton artist's acrylics at Michael's or AC Moore's hobby stores for relatively cheap. Use Raw Sienna + a little bit of white for a good base coat, and then tint accordingly to taste or tone with either white or yellow ochre.

This is the best was to get good skin tone in my experience without using oils. And it's even somewhat better than oils, because white oil paint will eventually leach into and absorb into the lower coats, making your highlights disappear and giving your figures that same "sunburned" appearance.

  • Member since
    February 2011
  • From: Ontario, Canada
Posted by gunner_chris on Monday, September 26, 2011 7:43 PM
Thanks for the tip and the honesty, I will slide by Michaels when I get a chance!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.