Painting a bucket

I often use regular auto primer on styrene, and usually do not have a problem.  I have not used galvanized primer, but you might test a piece of scrap with that primer and give it a try.  Also, you might try priming with regular auto primer and then a coat of the galvanized stuff.

And remember, no matter how poor a job you do in painting the bucket, it will always be better than kicking it.

Thanks for the suggestions guys.  Think I'll try the spray galvanizing, after all, if it melts I have a couple of spares.

Cheers,

Jim

And yeah, it better than kicking it!!

I have used MM Metalizer Aluminum to paint buckets,followed by some washes