Need Advice On Spaybooth Ventalation

Thank you for the reply Dennis. Yes, I plan to integrate an adjustable vent into the booth, to help regulate air flow. Thanks for the info on the motor, I was wondering if the motor was induction or not, I'm going to contact the manufacture to see if they can verify this.

Thank you for your inpute,

John

Hi  J&E,  You will have enough static pressure to tear the paint off your subject!  (kidding)  You will have losses with 10-15 feet of ducting but the unit is rated at ~ 1500CFM.  that is a bunch.  The motor runs at 3300 RPM so it most likely is an induction motor.  That means no brushes - no arching or sparking. . . it won't blow-up.  (I'm a mechanical engineer with a little bit of experience in air movement).  The worst thing that could happen is you collapse the duct work.  Integrate an adjustable vent if you are pulling too much air thru the box.  Good luck. Dennis.