SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Spray Booth purpose

1155 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2014
Posted by Scott Chapin on Sunday, January 11, 2015 3:45 PM
Rex,

The legal aspect crossed my mind. I was more willing to dismiss it, because the higher end models do not have the warning. Some blogs have mentioned that inexpensive units do not have brushless motors, so I wasn't sure.

Scott

  • Member since
    March 2005
  • From: near Nashville, TN
Posted by TarnShip on Sunday, January 11, 2015 3:01 PM

I didn't understand the question at first.

But, then I remembered reading an older thread about this.

That warning not to use with flammable materials is on there for insurance purposes, it is only there to attempt to lessen the liability if we make some mistake with their spray booth and cause a fire.

It is as useful as having a warning on a car's brake pedal that says "stepping on this pedal may cause a following car to hit the rear bumper"

There is a perfectly valid way to build a spray booth, even if you use a fan with brushes,,,,,,,,use a squirrel cage fan as found on a car's heater system. Squirrel cage fans have the motor outside of the air path.  Just get a fan from a 1970's or 1980's Ford or Chevy and mount that to your box, and then either plug that into a converter or use the 12 volt system it was designed for. (substitute car makes in other countries)

I wonder how many sales the companies have lost because of that warning?

Rex

almost gone

  • Member since
    December 2014
Posted by Scott Chapin on Sunday, January 11, 2015 2:40 PM

I would have thought that you wouldn't find them with brushes either, but why the warning not to use them with flammable materials? Is it a matter of lower air flow?

Scott

  • Member since
    May 2013
Posted by Snibs on Sunday, January 11, 2015 2:37 PM

I just googled this one,

www.paascheairbrush.com/.../HB-16-13

seems identical to the BD-512 and yes the motors are common brushless types, I don't think you will find a house hold fan with brushes anymore.

Mick.

Some stuff that might be interesting.

https://sites.google.com/view/airbrush-and-modeling/home

On The Bench.

Tiger 1 and Tooheys.

 

  • Member since
    December 2014
Posted by Scott Chapin on Sunday, January 11, 2015 2:17 PM

Thanks for the links Mick. I would not have thought of putting a rheostat on the fan, until after I had one up and running.

The units you get down under look like the Masters (Paasche knock off) I see online. yours don't have brushless motors though, or do they?

Scott

  • Member since
    May 2013
Posted by Snibs on Sunday, January 11, 2015 2:02 PM

Hi Scott.

Brushless fans of any sort are safe with all solvent spray, as Don said there is no spark, just a magnetic field so no ignition source.

Have a look at my links below.

Mick.

Some stuff that might be interesting.

https://sites.google.com/view/airbrush-and-modeling/home

On The Bench.

Tiger 1 and Tooheys.

 

  • Member since
    December 2014
Posted by Scott Chapin on Sunday, January 11, 2015 11:40 AM

Don Stauffer

If you use the proper fan/motor, there is no spark danger.  Many muffin fans use a sparkless motor system.

So you are better off making your own? I don't see where brushless motors are so cost prohibitive to put in lower end booths. The commercial booths that are safe are very expensive, but namely bulky bench hogs.

Scott

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Sunday, January 11, 2015 11:17 AM

If you use the proper fan/motor, there is no spark danger.  Many muffin fans use a sparkless motor system.

Don Stauffer in Minnesota

  • Member since
    December 2014
Spray Booth purpose
Posted by Scott Chapin on Sunday, January 11, 2015 10:59 AM

Of what real use is a spray booth, if you cannot use it with flammable substances like lacquer thinner? Wouldn't a mask and a backstop be good enough, if all you are concerned about is particulate matter?

Scott

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.