Paint pooling in air cap and needle cap

Thanks Don.

Hi Mars,

I had a similar problem with the G-22.  Have a look at the postscript on this page and see if it helps.  The little O-ring on the nozzle doesn't last long when exposed to solvents.

Don

damouav

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.

 

damouav

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.

 

damouav

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.

 

damouav

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.

 

damouav

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.

 

damouav

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.

 

damouav

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.

 

Master Airbrush model G22 or G23.Testors enamel and Testors enamel thinner. I tried for 3 parts  to 2 parts thinner, eyeballing it. Currently no guage or regulator on a Luminess make up compressor.Sorry about the computer mistakes, I'll catch on

 

Mars, more detail wouldn't go astray.

Lets start with;

• Airbrush make and Model
• Paint type and thinners used
• What % of paint to thinners
• What PSI are you running your airbrushing at

Then we can help sort the o ring thing you mentioned.