SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Paint hotness?

1761 views
11 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2012
Paint hotness?
Posted by JMorgan on Saturday, January 13, 2018 4:03 PM

Could someone out there clarify what paint hotness is? Does it have to do with how fast it dries? Also, how does hotness relate to what paints can be used over others? Thanks in advance! 

  • Member since
    November 2003
  • From: State of Mississippi. State motto: Virtute et armis (By valor and arms)
Posted by mississippivol on Saturday, January 13, 2018 9:54 PM

How hot a paint is refers to how aggressively it adheres to the surface you're painting. Some paints are so "hot", they'll create a wrinkling texture or crazing of the plastic, obviously not good. On the other end, some paints grip so weakly, that they need a primer underneath. Lacquers are known to be a hot paint, but then not all lacquers are equal, as some won't hurt plastic. Acrylics are on the other end of that scale. Enamels run both ways, depending on brand.

  • Member since
    October 2010
Posted by hypertex on Sunday, January 14, 2018 6:57 AM

I disagree. Hotness refers to how fast a substance evaporates. At least, that's how the paint chemists use the term when referring to solvents. The technical term is volatility. It's easier to say that a paint is "hot" than it is to say that "it contains highly volatile substances."

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Sunday, January 14, 2018 11:51 AM

I would say it is a measure of how well it dissolves other subtances it is placed over, such as the substrate plastic, or other previous paint coats.  Some alcohols evaporate very fast, yet do not bother most plastics.  Lacquer thinner is a very aggressive solvent, used in lacquer paints, and used by some people to thin enamels.  Water and isopropyl alcohol, not very strong, paint thinner (turpentine or mineral spirits) somewhere in between those two.

Don Stauffer in Minnesota

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Sunday, January 14, 2018 1:42 PM

I think scale modelers sometimes like to make up words, and there is probably no right or wrong answer to this interesting question, though in general I'd guess it is often used to mean to what degree a liquid attacks (or reacts with) whatever it is being applied over.

2 cents

 

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Tuesday, January 16, 2018 12:17 PM

Ditto Greg,can't be dogmatic about our opinions in this regard.

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Tuesday, January 16, 2018 2:33 PM

Valid point there, Tojo.

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, January 16, 2018 2:53 PM

Greg

I think scale modelers sometimes like to make up words, and there is probably no right or wrong answer to this interesting question, though in general I'd guess it is often used to mean to what degree a liquid attacks (or reacts with) whatever it is being applied over.

2 cents

 

 

Well put there Greg. Yes

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Tuesday, January 16, 2018 3:43 PM

Ta, Joe. Nice to hear from you 'ol buddy.

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, January 16, 2018 4:11 PM

I'm gettin' back in the groove. Been away from the bench way too long.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Tuesday, January 16, 2018 4:58 PM

mustang1989

I'm gettin' back in the groove. Been away from the bench way too long.

 

Good to hear

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Wednesday, January 17, 2018 1:41 PM

Tojo72
Good to hear

It sure is. Yes

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.