SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Wet Palettes - This Stinks!

5021 views
22 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Tuesday, December 8, 2020 1:22 PM

the Baron

 

Reminds me of my second "and last" wife's cooking ability.

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    September 2012
Posted by GMorrison on Tuesday, December 8, 2020 12:50 PM

if I tried that, my dogs would drink from it. Nothing makes them happier than drinking from the pond out front.

Ecchhh!

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, December 8, 2020 12:05 PM

Bobstamp
 
the Baron

Absolutely.  If you use water-based paints of any kind, the wet palette can make using them much easier.  If I could figure out a practical way to use a wet palette with other acrylics, like with Tamiya's, I would. 

Question: Why not Tamiya acrylics, which I have used exclusively?... 

Because Tamiya acrylics don't thin well, if at all, with water.  Tamiya's acrylics are alcohol-based, not water-based.  And even though some say they have used isopropyl successfully to thin Tamiya acrylics, that has not worked for me.

Through trial and error, I settled on using Tamiya's proprietary acrylic thinner (X20A) when I work with their acrylic paints, and that solved the problems I previously had with the paint clumping, or coats lifting when I tried to apply successive coats.  But their thinner is too expensive to use to fill a reservoir in a wet palette.

It's not a problem for me, though, not to use Tamiya acrylics with a wet palette.  When I use any Tamiya acrylic, I use a small jar of X20A and dip the brush in the paint and thinner, then apply it.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    November 2018
Posted by oldermodelguy on Tuesday, December 8, 2020 9:02 AM

Bobstamp

 (I don't use an airbrush, which just wouldn't work in my small apartment.)

 
Bob
 

I took up airbrushing while living in a two room apartment with half bath and half kitchen. In fact it could be argued I took up airbrushing because I lived there, having prior to that been a fan of rattle cans. That was 1974ish.. Not knocking brushes mind you, do that too to some degree.

 

  • Member since
    July 2019
  • From: Vancouver, British Columbia
Posted by Bobstamp on Monday, December 7, 2020 6:43 PM

the Baron

Absolutely.  If you use water-based paints of any kind, the wet palette can make using them much easier.  If I could figure out a practical way to use a wet palette with other acrylics, like with Tamiya's, I would.

 
Question: Why not Tamiya acrylics, which I have used exclusively? I was having a lot of trouble getting the paint to flow smoothly and dry evenly, so I recently bought some Tamiya retarder, which helps. However, the wet palette sounds useful. (I don't use an airbrush, which just wouldn't work in my small apartment.)
 
Bob

On the bench: A diorama to illustrate the crash of a Beech T-34B Mentor which I survived in 1962 (I'm using Minicraft's 1/48 model of the Mentor), and a Pegasus model of the submarine Nautilus of 20,000 Leagues Under the Seas fame. 

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Wednesday, February 26, 2020 12:23 PM

TankerEasy

...I suggest checking it out; it’ll make painting figures night and day easier, along with anything you’re trying to add detail too.

Absolutely.  If you use water-based paints of any kind, the wet palette can make using them much easier.  If I could figure out a practical way to use a wet palette with other acrylics, like with Tamiya's, I would.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    June 2018
Posted by TankerEasy on Wednesday, February 26, 2020 7:32 AM

KnightTemplar5150

I think that the longest I've kept a batch of paint on my wet palette has been three days? Definitely not a long-term storage solution, but handy as heck for figure painting. 

Also, consider using distilled water in the palette instead of tap water. I have hard water in the place I'm renting and the minerals seem to bring their own sets of issues with Vallejo's acrylics, as well as the various smells and organic material the plumbing carries with it. The distilled water makes things easier and there's less of a chance of weird smells.

 

 

I second this; I keep a gallon jug of distilled water at my desk for mixing paint and decaling.

 

 

 

 

 

I made my own wet pallet, I stole a shallow Tupperware container from the kitchen that seals shut with latches, cut two sponges to fit, and simply top it up with some distilled water to keep the sponges wet.  If you go on amazon you can find parchment paper that comes in a box of 1000 sheets in 5in by 5in squares, and if I remember right it was under 10 bucks.  As soon as one sheet is used up, I toss it and get a fresh sheet.  For those that have never used a wet pallet, I suggest checking it out; it’ll make painting figures night and day easier, along with anything you’re trying to add detail too.

 

Millennial modeler

Air Force vet (2006-2012)

Recently completed: 1/48 Tamiya V1

On the bench: Hasegawa 1/8 Clerget 9B rotary engine, 1/35 scale Trumpeter SA-2 Guideline missle

 

 

 

  • Member since
    November 2015
Posted by E. Halibut on Tuesday, February 25, 2020 10:11 PM

One thing I've noticed is that you have to adjust downward the amount of paint you use. When you squeeze acrylic paint out on a regular palette, you know that there is going to be some wastage, as even with a thinner it starts to dry at the edges before too long. Not so on a wet palette, I squeezed out four big drops of Vallejo black and it was still wet when I used it all up 45 minutes later. If you put out too much, it stays wet in a big puddle on the palette, which might lead to odor problems, but will also flow around the palette if you tilt it (to close it or just to move it around on your workspace). It will possibly (read: inevitably) blend into that perfect mix that you wanted to keep for the next session. 

Terry Jones, 1942-2020

"He's a very naughty boy!"

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Thursday, February 20, 2020 8:17 AM

E. Halibut
Yes, I should have cleaned it out more often

I just looked at the AK wet pallette. Nice little unit, looks like a good choice. Yes

Keep in mind the paper is meant to be disposable, not reusable. When you're done with a session or the palette is used up, just dispose of the paper top layer and leave the lid open to allow the sponge to dry.

I can see no need to clean anything, I've had mine for several years and certainly haven't.

  • Member since
    November 2015
Posted by E. Halibut on Wednesday, February 19, 2020 8:47 PM

Est.1961

Sorry, I don't know what Terry Jones would say of this question but was it a fishy smell? Wink

 

 
Yes, that went wherever I did go!
 
Thanks for the help, everyone. Yes, I should have cleaned it out more often (I wish that this had been mentioned in the instructions). I did use distilled water, and it still smelled. I guess I will try to wash it out tonight.
 
Again, thanks.

Terry Jones, 1942-2020

"He's a very naughty boy!"

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Wednesday, February 19, 2020 3:40 PM

Bish
 
Tanker-Builder

I have a question;

   What in the name of flurry is a wet Palette? I know what a Palette is. I have done oil painting and such and I have a smaller version of the one Bob Ross uses. I use a little one for modeling. Now what is the use and need for a wet palette as well? 

 

I have to offer a minor correction, or clarification, about the "wet" part.  I don't know of any wet palettes that use tissue.  It'd fall apart.  Rather, a wet palette typically contains a sponge of some kind, and a permeable paper that can stand up to being wet.

When I first started working with one, I made my own out of a take-out container, a kitchen sponge, and brown packaging paper as the permeable paper:

Some people use kitchen parchment paper.  But most brands are treated with silicone, to make them impermeable-so things don't stick-and you have to prepare the paper, if you want to use it as a palette.  The trick I have read about is to boil the paper.  Personally, I don't use it, that's too much effort.

I used that palette for a year or two, to get used to working with one, and then I bought myself a commercially-produced palette, from GreenGrass Games.

My homemade palette worked OK, though with repeated use, yes, the sponge would get a little grungey, the plastic wore out and cracked, losing the air-tight quality, and the packaging paper would start to break down, resulting in fibers in my paint.

To clean the sponge, I would just nuke it from time to time.  I could keep paint for about a week.  I refreshed the palette by pouring a little water in it as it evaporated.

The GreenGrass palette is nice, because it has a small footprint on the bench.  Their paper is super-fine.  And you can re-use a piece of paper.  But I sometimes find myself looking back on my homemade one, because I got so used to how it works.

Also, though I paint figures, I use it on any model work involving water-based acrylics.

It does help working on a subject, to be able to keep a batch of colors fresh from one session to the next.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Wednesday, February 19, 2020 3:30 PM

Thanks for the heads up Knight.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    April 2013
Posted by KnightTemplar5150 on Wednesday, February 19, 2020 3:22 PM

I think that the longest I've kept a batch of paint on my wet palette has been three days? Definitely not a long-term storage solution, but handy as heck for figure painting. 

Also, consider using distilled water in the palette instead of tap water. I have hard water in the place I'm renting and the minerals seem to bring their own sets of issues with Vallejo's acrylics, as well as the various smells and organic material the plumbing carries with it. The distilled water makes things easier and there's less of a chance of weird smells.

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Wednesday, February 19, 2020 3:11 PM

Tanker-Builder

I have a question;

   What in the name of flurry is a wet Palette? I know what a Palette is. I have done oil painting and such and I have a smaller version of the one Bob Ross uses. I use a little one for modeling. Now what is the use and need for a wet palette as well?

 

Basicaly, its a container, often a plastic tub, with a wet substance, tissue for example. It can be used to mix small amount of acrylic paint and keep it from going dry for longer than usual. Its used mainly by figure painters.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Wednesday, February 19, 2020 3:06 PM

I have been planning on geting one, but i thought you could keep it wet as long as you wanted. I had not thought about the effects of the water in there for a long period though.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Wednesday, February 19, 2020 2:57 PM
This is way beyond my pay grade

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Wednesday, February 19, 2020 2:18 PM

I have a question;

   What in the name of flurry is a wet Palette? I know what a Palette is. I have done oil painting and such and I have a smaller version of the one Bob Ross uses. I use a little one for modeling. Now what is the use and need for a wet palette as well?

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Wednesday, February 19, 2020 1:35 PM

For palettes, I use the carboard flers I get in the mail.  You must use the plastic covered ones.  The glossier are needed.  The more glossy the better, meaning a thicker coating (best to use ones with that glossy plastic on both sides).  The plastic coating is waterproof, thin CA proof, enamel proof.  Only thing that soaks in is lacquer.  I use these palettes for paint mixing, and for gluing with CA.  Works great, and cheap.  I collect that kind of mail just for palettes, and with election season now, I get more than enough.

 

Don Stauffer in Minnesota

  • Member since
    July 2008
Posted by Est.1961 on Wednesday, February 19, 2020 9:22 AM

Sorry, I don't know what Terry Jones would say of this question but was it a fishy smell? Wink

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Wednesday, February 19, 2020 8:25 AM

modelmaker66
I don't think you are to keep it wet with paint on it indefinately, maybe a few days.

I agree. That's how I handle mine, anyway. I wet it up when I want to use it.

  • Member since
    July 2013
  • From: Chicago area
Posted by modelmaker66 on Wednesday, February 19, 2020 2:16 AM

Add a little ammonia to the water used to wet your sponge. Ammonia will not hurt the sponge or the paper, but will help retard the growth of mold. To keep your palette smelling fresh, sprinkle a little baking soda on the bottom of the palette before placing your sponge down.

  • Member since
    July 2013
  • From: Chicago area
Posted by modelmaker66 on Wednesday, February 19, 2020 2:11 AM

Hi!

 

I don't think you are to keep it wet with paint on it indefinately, maybe a few days. I thought after that you threw the paper away and cleaned the tray and sponge and let it dry until you used it again. Maybe I'm wrong. It sounds like it is stagnant water, growing mold and bacteria. It sounds like you are using it wrong.

  • Member since
    November 2015
Wet Palettes - This Stinks!
Posted by E. Halibut on Tuesday, February 18, 2020 10:11 PM

After reading articles and watching Youtube videos on the benefits of the wet palette when using acrylics, I bought the AK product and set it up according to the instructions. I really liked the reesults, and it makes acrylic painting much easier.

The problem? It's been about a week and a half and it's really starting to give off an odour. Am I doing something wrong? It mentions keeping it in the fridge if you don't use for long periods, but I didn't think it would happen so quickly, or maybe I shouldn't have been surprised?

Terry Jones, 1942-2020

"He's a very naughty boy!"

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.