SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Testor's Enamels?

777 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Thursday, April 15, 2004 6:06 PM
Thanks fellas, Yeah Scott, I plan to add as much detail as I can plus there are quite a few dacals with this kit and I have a brand new bottle of Future that hasn't even been cracked yet. Oh wait, my wife experimented with it on one of her kit windshields the other day. Oh well. Hey you guys! Scott I think I asked you this before, but can't remember. Anyway, when using future (airbrushing) do you dilute it or shoot it straight OTB? Thanks -Spencer
  • Member since
    July 2003
  • From: Toronto, Ontario, Canada
Posted by zokissima on Thursday, April 15, 2004 3:20 PM
Definitely do the smell test. And as others said, a flat colour tends to dry a lot faster, where gloss coats take much longer.
I haven't used testors enamels in years, but from what I remember, with flats, I'd only allow a few hours between coats. Gloss, however, I left for 24 hours before touchups.
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Thursday, April 15, 2004 10:36 AM
QUOTE: I'm trying to decide on black or the brown. I've seen both.

Pick the color that is either 1) Most common or 2) Contrasts best with your interior. Having everything the same color is boring, so when you have a choice add a little something that will pop out from everything else. A little red knob or amber indicator on a dash, khaki seats when everything else is OD, something like that.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    November 2005
Posted by Anonymous on Thursday, April 15, 2004 10:30 AM
Thanks Drew, Everything turned out fine you guys. Now I have to sand a little and paint the seat cushions. I'm trying to decide on black or the brown. I've seen both.
  • Member since
    November 2005
Posted by Anonymous on Wednesday, April 14, 2004 8:45 PM
I've always found that flat colors dry and set alot faster. And I agree since its the same paint you should have no problemMy 2 cents [2c] Headphones [{(-_-)}]
  • Member since
    November 2005
Posted by Anonymous on Tuesday, April 13, 2004 11:43 AM
Thanks Scott, That's what I was thinking. I'm off to touch-up! Thanks Again!
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Tuesday, April 13, 2004 11:38 AM
12 hours should be fine, especially since you are going to airbrush the same color back on. If you were going to hand brush a different color I'd say wait for at least 24, but you should be OK.

One way to tell is to smell it. If you can still smell enamel paint it hasn't cured completely.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    November 2005
Testor's Enamels?
Posted by Anonymous on Tuesday, April 13, 2004 11:27 AM
Hi Guys! I finally painted my M2 interior last night. I decided to go with the Testor's enamels because I'm switching over to acrylics and I want to try and use as much old paint up as possible. I hate to waste things, plus I had allready mixed the color. Anyhow, I was wondering how long I have to wait before I can touch it up? I mean I airbrushed it last night with a few coats, but that was in about a 1hr. time frame. So it's been drying now for about 12 hrs. Would it be okay to go ahead and touch-up the lighter areas now or do I have to wait for the paint to completely cure? Thanks, --SpencerSmile [:)]
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.