Recommend me an airbrush with a needle larger than .5mm

ctruss53

 

Great info.  I didn't even think about external mix.  That might be the solution.  If it is external mix then I don't have metal flakes around the needle to clog it.

 

On the H the fluid still goes through the tip but the parts are not intricate, nor small at all. I said before, you could blow a blood clot through a Paasche H #5 tip I think.And it still trims back for finer shooting, I use that combo for priming models and also varnish for my wifes paintings.

The Paasche VL has drop in tips as you like. That medium Tip at .7 flows a lot of fluid opened up, even the finer .55 can if you open it up. The VL is my main brush for acrylic color coats. But it is suction feed, I use a side cup with it quite a bit. The price is right on either of these airbrushes and they're built like tanks, good customer service too.

Strongeagle

Ahoy Mr. ctruss53.

The Badger Patriot 105 has a .76 mm tip available.  The Badger part number is 41-046, it's the one with the silver ball on the end. Badger's part number for the .51 mm tip is 41-045, blue ball on the end; and the part number for the .30 mm tip is 41-044, black ball on the end. If you Google the part number followed by "badger", you'll find multiple sources for these items.

If you want to do some serious blasting, the Paasche H (an external mix airbrush) has a .64 mm #3 tip and a 1.07 mm #5 tip.

Paasche's old classic airbrush, the VL (internal mix) has three tips available, #1 is .55 mm; #3 is .74 mm; and #5 is 1.05 mm.

 

Great info.  I didn't even think about external mix.  That might be the solution.  If it is external mix then I don't have metal flakes around the needle to clog it.

Ahoy Mr. ctruss53.

The Badger Patriot 105 has a .76 mm tip available.  The Badger part number is 41-046, it's the one with the silver ball on the end. Badger's part number for the .51 mm tip is 41-045, blue ball on the end; and the part number for the .30 mm tip is 41-044, black ball on the end. If you Google the part number followed by "badger", you'll find multiple sources for these items.

If you want to do some serious blasting, the Paasche H (an external mix airbrush) has a .64 mm #3 tip and a 1.07 mm #5 tip.

Paasche's old classic airbrush, the VL (internal mix) has three tips available, #1 is .55 mm; #3 is .74 mm; and #5 is 1.05 mm.

oldermodelguy

The 105 comes standard with a .5, fwiw. Last winter SprayGunner had a sale going on that included the 105 ( I think they had a 4th or July sale as well), these come up periodically with them. As I recall they were well under $100 on sale. Might be worth a look see with Labor Day coming on.. Anyway, point being if you buy that then to my eye, there is your .5 setup with the least expenditure,since it's the standard setup. And you can leave your existing brush with the tip you like best on it.

We have a few 105 loyalist here at the forum.

 

Interesting you say the Patriot 105 comes with the .5mm needle. Because Spraygunner only sells it with a .3mm. They don't have a .5mm available.

ctruss53

 

 

oldermodelguy

Grex will likely be outside your target price range you mentioned within the thread. And the tip design not your preference, if I'm not mistaken. Not to be a party pooper of course, if you want it you want it.

 

 

 

 

Yeah, I saw that the Grex is not my preferred style, and a bit more than I wanted to spend.

However I did some test shooting tonight. My Eclipse with the working .5mm tip is handling the metal flake paint very well.

I think I am just going to leave the .5mm tip in that Eclipse and then maybe find a Badger Patriot 105 with a .3mm tip. That Badger is the floating seat design I like, and fits my price point.

 

The 105 comes standard with a .5, fwiw. Last winter SprayGunner had a sale going on that included the 105 ( I think they had a 4th or July sale as well), these come up periodically with them. As I recall they were well under $100 on sale. Might be worth a look see with Labor Day coming on.. Anyway, point being if you buy that then to my eye, there is your .5 setup with the least expenditure,since it's the standard setup. And you can leave your existing brush with the tip you like best on it.

We have a few 105 loyalist here at the forum.

oldermodelguy

Grex will likely be outside your target price range you mentioned within the thread. And the tip design not your preference, if I'm not mistaken. Not to be a party pooper of course, if you want it you want it.

 

Yeah, I saw that the Grex is not my preferred style, and a bit more than I wanted to spend.

However I did some test shooting tonight. My Eclipse with the working .5mm tip is handling the metal flake paint very well.

I think I am just going to leave the .5mm tip in that Eclipse and then maybe find a Badger Patriot 105 with a .3mm tip. That Badger is the floating seat design I like, and fits my price point.

ctruss53

 

 

EdGrune

The GREX Genesis series offers spray head and needle options up to .7mm.   Their Miniature Spray Gun series starts at 1.2 mm

GREX makes a good product.  Their trigger options are unique and get a bit to get used to, but once mastered are a good tool

 

 

 

 

I have been kind of interested in trying a Grex airbrush. I am intruiged by the grean ergonomic parts, and the trigger.

I'll have to take a look and see what it costs to get into one of those and modify it for .7mm.

Thanks

 

Grex will likely be outside your target price range you mentioned within the thread. And the tip design not your preference, if I'm not mistaken. Not to be a party pooper of course, if you want it you want it.

EdGrune

The GREX Genesis series offers spray head and needle options up to .7mm.   Their Miniature Spray Gun series starts at 1.2 mm

GREX makes a good product.  Their trigger options are unique and get a bit to get used to, but once mastered are a good tool

 

I have been kind of interested in trying a Grex airbrush. I am intruiged by the grean ergonomic parts, and the trigger.

I'll have to take a look and see what it costs to get into one of those and modify it for .7mm.

Thanks

The GREX Genesis series offers spray head and needle options up to .7mm.   Their Miniature Spray Gun series starts at 1.2 mm

GREX makes a good product.  Their trigger options are unique and get a bit to get used to, but once mastered are a good tool

I went and bought another .5mm needle and seat for my Iwata Eclipse. This set works fine, so I'll be returning the other set I bought.

And the .5mm needles appears to be large enough to handle the metal flake lowrider paint. I was able to spray it without clogging the airbrush.

I would still like recommendations for quality airbrushes with needles larger than that .5mm I am using. Then I can have an airbrush dedicated to these metal flake paints. And I can revert my Eclipse back to the .35mm tip for finer work.

Plus I also like to use Splash paints and he specifically reccomends high air pressure and a .35mm tipped airbrush for his products.