to paint on the sprues or not to

I usually drill little holes where they won;t be seen on the finished article and super glue a tooth pick in.

I've just done all the road wheels, return rollers, driver spockets, bogies.....well just about everything in this manner on an Italeri Semovente SPG.

It can seem an extra chore, but it is well worth while.

Karl

I used to paint on the sprues, but as said by others, then you need to repaint after attaching.
Nowadays I use all sorts of clamps, toothpicks and tape to hold the object that I am painting.

I leave some of the small parts with small attachment points on the sprues, but only sometimes. I usually use a piece of styrene rod as a handle and glue the part temporarily. Works well for me.

I agree. I have never painted anything on the spures.

Nothing on the sprue for me not even roadwheels for all the reasons mentioned so far. Painting everything twice is double work. I use upside-down masking tape after I clean all the parts up. Paint one side, let em dry a little, flip everything, and paint the other side. hit all the attachment points with liquid mask beforehand too.

I do tank road wheels on the sprue, very little else. What I will sometimes do tack little parts onto a piece of plastic with super-glue after I've done all the sanding, tacking on the areas that will be hidden by the glue joint when finally assembled.

I agree with Robert. I never paint anything on the sprue because the vast bulk of the paint is going to get sanded off.

I haven't painted parts on the sprues since...well...I guess since I was about 18 or so (1980)

I find that for any small parts they are easier to paint on the spruce ie: handles, and roadwheels. The rest I paint on the kit.