SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Model Master Acrylics

788 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Saturday, September 24, 2005 9:45 PM
Thanks guys. I put thinner and retarder in that batch of paint the other night but I guess the ratios were not what they should have been. Seems that enamels are a lot more forgiving than acrylics. I was telling SWMBO that I have never been able to spray acrylics well even as a teenager, although I did manage to write her name with the Anthem and the 150. As a side note, I was thinking of selling my Crescendo, but it does lay down acrylic as a base coat like a pro. So I guess I'll keep it. So thanks again and I'll jump back on the acrylic horse and ride it with PollyScale.

E

... now what will I do with that big can of Model Master enamel thinner I bought at the LHS tonite?????
  • Member since
    September 2003
  • From: N.E. Ohio
Posted by dragonfly on Saturday, September 24, 2005 6:04 PM
It's all about the thinner, get it right and you'll have no problems.

Jerry
  • Member since
    November 2005
Posted by Anonymous on Thursday, September 22, 2005 7:52 PM
Make sure you don't over thn Model Master Acryl paints. Some of them you airbrush without thinner or only using a few drops of thinner. Remember, you want the consistency of milk.

Jesse
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Thursday, September 22, 2005 5:25 PM
I use MM Acryl, Tamiya, and PollyScale a lot and don't see much difference in how they spray. PollyScale is a lot thinner than the other two and doesn't need to be thinned any more, but they all three spray great.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    February 2003
  • From: Saratoga Springs, NY
Posted by Jeeves on Thursday, September 22, 2005 12:48 PM
Pick up some acrylic retarder at any craft shop-- a few drops before you add your paint prevents buildup as it lengthens the dry time a bit...
Mike
  • Member since
    November 2005
Posted by Anonymous on Thursday, September 22, 2005 11:37 AM
Did all of the above ( except for spraying thinner before the color ) , just one of those nites I guess. Thanks.

E
  • Member since
    February 2003
Posted by mass tactical on Thursday, September 22, 2005 9:30 AM
I have had good luck when thinning with Acryl Thinner which is a Model Master product. I usually add just a couple of drops and it helps paint flow. Most acrylics are problem prone due to their quick drying times. Before I spary them, I always shoot a little thinner through my airbrush. A little needle lube can also be of benefit. Keeping your airbrush spotless, with particular attention given to the nozzle and needle , will help.

Mike M
  • Member since
    November 2005
Model Master Acrylics
Posted by Anonymous on Thursday, September 22, 2005 12:24 AM
Does anyone else find Model Master Acrylics to be a little more difficult to spray than Polly Scale or Tamiya? Tonite was one of those nights I couldn't get it right.

E
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.