Spray/paint booths - recommended brands?? - FineScale Modeler - Essential magazine for scale model builders, model kit reviews, how-to scale modeling, and scale modeling products

ckfredrickson

Member since
April 2003
From: Halfway back to where I started

Posted by ckfredrickson on Friday, June 9, 2006 9:57 PM

I got mine from Madison Art Shop... they just happened to be the cheapest at the time (~2 years ago).

I believe you can also direct order them through Artograph, and would check BearAir and Dixie Art.

Reply

Dubau

Member since
March 2006
From: Boyertown, PA, USA

Posted by Dubau on Friday, June 9, 2006 9:46 PM

Hay Waynec,

Could you please send me a copy of the drawings too please, I am thinking about building one too.

wonabe@comcast.net

Thanks

Bud

" You've experienced a set back, and without set backs and learning how to fix them you'll never make the leap from kit builder to modeler "

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Friday, June 9, 2006 9:20 PM

Do you know of an outlet on-line from which I could purchase the metal hood for my Artograph 1520?

Reply
Edit

espins1

Member since
December 2002
From: Reno, NV

Posted by espins1 on Saturday, April 29, 2006 10:55 PM

I bought a Pace Peacekeeper (the big one) and it's big enough to handle anything I need to do in it, and then some. To put it in perspective, the two planes in the booth are both 1/48 scale.

Scott Espin - IPMS Reno High Rollers My Reviews

Reply

waynec

Member since
April 2006
From: Denver, Colorado

Posted by waynec on Saturday, April 29, 2006 9:08 PM

one of the guys in my wooden ship building club http://www.rkymtnshipwrights.org built one from stuff around his workshop and i drew up some plans. you can take the blower off and it folds up on itself. big enough for the bluejacket model of uss maine (think 1/350). can send you the drawings if you are interested and he doesn't mind. we are hoping to get the article published in Nautical Research Guild magazine.

Никто не Забыт (No one is Forgotten)
Ничто не Забыто (Nothing is Forgotten)

Reply

Wilbur Wright

Member since
February 2006
From: Boston

Posted by Wilbur Wright on Wednesday, April 26, 2006 1:07 PM

I would love to build one however anyone that models big planes ........its pretty tough if not impossible.
Do any of you ever spray outdoors in nice weather????????

If you build smaller scale pieces I would look at the badger.

Reply

usmc1371

Member since
October 2005
From: Maryland

Posted by usmc1371 on Wednesday, April 26, 2006 11:38 AM

I got this one: http://cgi.ebay.com/NEW-Paasche-Hobby-Shop-Paint-Spray-Booth_W0QQitemZ8278622659QQcategoryZ28111QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Works great and reasonably priced I think.

Jesse

Reply

NikToo

Member since
March 2006
From: South Coast, UK

Posted by NikToo on Wednesday, April 26, 2006 2:10 AM

I'd say build your own. The wood cost won't be much more than $20 and then you can just fit the fans, filters, and a light.

On the bench: Tamiya 1/48 Tiger I:

Tamiya 1/48 Jagdpanther:

Skybow 1/48 Tiger I Late:

Reply

ckfredrickson

Member since
April 2003
From: Halfway back to where I started

Posted by ckfredrickson on Tuesday, April 25, 2006 8:02 PM

I've got an Artograph 1520. My housing has been in flux for the last few months, so it's boxed up and I haven't used it in awhile, but here's what I recall:

The 1520 is a good sized booth (15"x20"; a 1/48 F-14 would be a VERY tight fit, but I had little problem with a 1/48 F-15). The fans come off as being a little underpowered; it's OK for airbrushing, but I would not recommend opening your double action all the way or at very high pressures, and using rattle cans is almost out of the question.

The downdraft aspect of it is pretty cool... basically, since both gravity and the fan are drawing the air downward, you can get away with a lower air velocity at the face of the booth. The charcoal filters are cool too in that they pick up most of the odors so that venting outside is not absolutely necessary (I didn't with enamels or acrylics and didn't seem to have any problems, but I'm not sure I'm courageous enough to try the same with lacquers). (Other booths sometimes use furnace filters, which would be equivalent to the pre- and middle filters of the 1520; the Artographs are the only brand I know of that use a charcoal filter)

The booth comes with a cardboard hood, but I would strongly recommend spending the extra money to get the metal hood with the plexiglas window up top; other retailers like Artograph and Testors repackage and sell the 1520 as their own (usually with the metal hood included, though in my case it was cheaper to buy them separately). It is a bit smaller than the cheaper Paashe, but it's supposedly a lot lighter and to me fits better on a table.

To the best of my knowledge, the Artograph 1530 is essentially an upsized 1520 with 2 fans, and only comes with the metal and plexiglas hood.

Overall, I'm pretty satisfied with it, and would definitely buy it again.

That being said, a number of plans are available online. For a fairly decent overview, I'd recommend you start here:

http://www.briansmodelcars.com/tutorials/tutorial.asp?TutorialID=23&CurPage=1

Reply

MikeV

Member since
April 2003
From: Hayward, CA

Posted by MikeV on Tuesday, April 25, 2006 7:37 PM

I have the new Badger spray booth and love it!

“Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon

Reply

Anonymous

Member since
November 2005

Spray/paint booths - recommended brands??

Posted by Anonymous on Tuesday, April 25, 2006 7:27 PM

Hi,

I'm looking to buy a paint booth (unless I were to see some great plans) . I've been reading the forum, reading peoples' web sites, etc. for information. Obviously, if money were no option ;-D I'd have a manufacturer custome build me one! So I am looking for something I won't regret spending the $$ on.

I've seen recommendations for Paasche, Artograph's 1530, Pace Industries Peace Keeper (by PACE Enterprises). I've also seen recommendations for a "downdraft" style (like Artographs) vs. an "updraft" or "rear" exhaust. What is the benefit/drawback to each??

I am looking to hear a number of ideas from people as far as what they've used (that's still on the market, of course), what they're currently using, or what they're looking for in a new booth.

What do you like/don't like what you're using now?

Thanks.

Reply
Edit

THE MAGAZINE

CONTACT US

RECENT ARTICLES

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT VIDEOS

POPULAR TOPICS

RECENT THREADS

CATEGORIES

NEW PRODUCTS

OUR STORE

CURRENT ISSUE

SEARCH FINESCALE.COM

Spray/paint booths - recommended brands??

Scott Espin - IPMS Reno High Rollers My Reviews