I have a paache H-1, VL-1 and a badger 200. with those, I still want one more, a Badger 150G.
On all Three I have learned to strip them down and thoughly clean between colors. I use lacquer thinner on the enamals and a mix of rubbing alcohol and denatured alcohol(50/50), Q-tips and pipe cleaners On the paache H,leave I leave the air head alone, but frequenly check the O-ring for cracking. The VL and the Badger, pull the needles and disassemble the air heads on both this also means the paint cone, be very very careful here. When all clean, reassemble. It's tetiouse, but the results keep other paint colors from suddenly appearing on one of my white helicopters ( It happened ).
Oh ya. for all of you if you don't already know. lacquer thinner is an alcohol base and a degreaser( also a paint striper ) when using the material, when ( not if )it gets on your skin, it will degrease it,and leave it dry! I mean really DRY. when painting enamals and cleaning I use latex gloves. cheapest I found is at a warehouse store. hard ware or med supply place is also good.. Also keeps you hands clean and paint free. just some advise
Good modeling
Air 5 is out.